I have one screw that is so tight on top. Suggestions on taking out before I strip it?
@steevehives128
7 ай бұрын
use a heat gun on low and heat it up a bit
@edwardjingber
4 жыл бұрын
Not really Phillips Head screws that attach the cover, they're JIS (Japanese Industry Standard) screws. You risk damaging the screws if you use a standard Phillips Head screwdriver.
@daviddeas6486
3 жыл бұрын
What is JIS, and what's the difference? I have Phillips and Reed & Prince, never heard of JIS.
@talbizle
2 жыл бұрын
Thanks for the video Ken. I'm saving now to get this radio.
@stevewilkes2307
Жыл бұрын
Can you still use the rig control that's in most logging software?
@chrisharris5327
4 жыл бұрын
Be nice if the packaging was ESD safe....
@asl3688
5 ай бұрын
Very good!
@seabreze
4 жыл бұрын
Can it be used with SDRplay RSPdx???
@transmaster
10 ай бұрын
yes
@belkisdiver7677
2 жыл бұрын
hello i have a yaesu ft 2000d can you post a video for this radio installation i have omni rig and a panadapter i also have the sdr rsa1a. having trouble.
@sulochanasatyan7228
4 жыл бұрын
Just a doubt, in case the radio's touch screen goes qrt will the on screen display work. Thanks
@sitnslide
4 жыл бұрын
Other than mounting issues, can the PTRX-7300 and Inrad RX7300 be installed and used simultaneously? A panadapter and second receive antenna.
@ess2870
7 ай бұрын
Did you move any further with this idea? I'm currently waiting on parts to install both in mine....
@michaelm1keyhardy865
4 жыл бұрын
Anybody sell this in the UK? Mike M0FCG M1KEY
@jimmeeGray
4 жыл бұрын
Buy an rsp1a . They're made in England
@Aleziss
4 жыл бұрын
When you transmit, everything is safe not overloading the SDR receiver ?
@1112223333111
4 жыл бұрын
lol this thing sucks. you need the sdr and a board? and a laptop that wont lag? waste of time and money
@Michael-nd7gh
3 жыл бұрын
@@1112223333111 What a stupid comment.
@TingILi
4 жыл бұрын
Any solution for FTDX-5000?
@Markinpuff
4 жыл бұрын
BU2AH革命 The 5000 has a IF output.
@RSwrightMD
4 жыл бұрын
This is an elegant video showing how simple it is to install the SDR to make a large screen panadapter for one's IC-7300. Thanks, Ken!
@DXEngineering
4 жыл бұрын
Thanks for watching, Scott!
@jimmeeGray
4 жыл бұрын
Really??????
@shawnp6653
4 жыл бұрын
How do you loosen the screws? Mine are so tight, I am afraid I'll strip them out!
@tonymcgee1146
4 жыл бұрын
Stripping them is easy to do. Make sure your screwdriver fits perfectly, press down firmly and unscrew slowly, you should be ok
@kevinmaxson7304
Жыл бұрын
I stripped one of mine out using a Phillips screwdriver. I finally had to use another Phillips bit attached to a cordless hammer drill. Just the tapping of the hammer drill broke the screws free. Out of 14 screws, three of them wouldn't budge with a regular screwdriver.
@steevehives128
7 ай бұрын
heat them up a bit with a heat gun
@RCVinyl
4 жыл бұрын
Thanks. Good video!
@DXEngineering
4 жыл бұрын
Thank you for watching!
@jimmeeGray
4 жыл бұрын
@@DXEngineering he lied
@KO4DFJRadio
3 жыл бұрын
Will this panadapter work with RSP Duo?
@revadan
4 жыл бұрын
200+ without SDR.. ok bye.
@theolsonhome
4 жыл бұрын
The company that makes these is seriously price gouging. If we had that type of extra money we would of used it toward the 7610. Does any company care about the consumer anymore?
@dennisthrush2835
4 жыл бұрын
What are the correct baud rate and com ports? Thanks, de N5DHT
@RSwrightMD
4 жыл бұрын
The baud rate is what you have the 7300 set with for CAT. The com ports are those you are using for your 7300 CAT control.
@jimmeeGray
4 жыл бұрын
@@RSwrightMD another bull$hit reply from a bull$hitter.
@Michael-nd7gh
3 жыл бұрын
@@jimmeeGray Wow, you're a grade A troll aren't you? lol
@jimmeeGray
3 жыл бұрын
@@Michael-nd7gh that's not what she said. Lol
@Michael-nd7gh
3 жыл бұрын
@@jimmeeGray awesome story, bro.
@lizzyfan1986
4 жыл бұрын
So, you end up paying $239 for this unit and another $119 for SDRPLAY?
Пікірлер: 45