Pretty sure this would work even better with the OE intake. Ofc you won't get that nice engine sound, but you will def get colder air.
@sanderpena
Жыл бұрын
yes for sure was for stock box.
@Overlord-gaming-
4 жыл бұрын
I dont see how this would be of any benefit without the stock airbox. With the stock airbox this would feet right in, that injen intake isn't lined up with it
@coltondarger9986
4 жыл бұрын
N.Driver the production version of the injen intake removes the factory air box with a heat shield that blocks the hot air from the engine it also helps feed the cold air to the intake
@Pabs502
4 жыл бұрын
Mark yup
@justusyael6708
3 жыл бұрын
i guess I am kinda off topic but do anyone know of a good website to stream new tv shows online ?
@vanmorgan855
3 жыл бұрын
@Xavier Kylo yea, have been watching on Flixzone for months myself :)
@justusyael6708
3 жыл бұрын
@Xavier Kylo thanks, I went there and it seems to work =) I appreciate it!!
@ProtoZero67
5 жыл бұрын
Its nice to see more aftermarket parts going on sale for our Veloster N’s. The color of the snorkel stands out too much but thats just me. I would've bought it in black so it doesn't stand out when you are looking at the front of the car. Otherwise, great video!
@thephotogod257
3 жыл бұрын
AND1 shorts? A man of culture, I see.
@troy9er
4 жыл бұрын
Nice, brings nice fresh air into the area. Looks good too!
@stungbystinger209
5 жыл бұрын
Very informational. Great video.
@SynergyMediaUSA
5 жыл бұрын
thank you
@sanderpena
Жыл бұрын
what is the point of that when the stock airbox is gone? that is just to feed more air to the stock box, I put an aci on mine and removed the stock one cause no point of having it on when stock box no longer there.
@troywilliams5293
4 жыл бұрын
Just wanted to add a comment about that radiator shroud I have a 19 turbo ultimate and I was worried about that radiator shroud but brought the big mouth anyway. When I took my bumper off low and behold there was no radiator shroud on there only two side pieces on the right and left side. I did have to trim the drivers side to fit
@benrichard5667
4 жыл бұрын
This ram air works amazing the the aFe power Takeda intake for the 2nd gen VT's! I have that setup on my '19 R-Spec
@SynergyMediaUSA
4 жыл бұрын
awesome
@samuelsmith9180
Жыл бұрын
@@SynergyMediaUSAany risks to removing that plastic piece from the radiator? Isn't that somewhat controlling temps.
@samuelsmith9180
Жыл бұрын
@SynergyMediaUSA Hi brother does taking off that plastic piece that covers the radiator pose any risk to the radiator/ engine. Or performance in general. i want to make sure before i order the big mouth kit lol.
@njjx8800
2 жыл бұрын
why did you leave the stock radiator shroud off?
@jefferymartellini8664
7 ай бұрын
Do you notice any change in engine temp with that shroud around the radiator being gone?
@SynergyMediaUSA
5 ай бұрын
I actually have not
@MizzouRah78
4 жыл бұрын
Seems like a cool product, but I definitely wouldn't want it that visible. Not because of the look of the product, itself, but because it sits in an odd, unsymmetrical location. Kinda gives you that vibe that it's not supposed to be there. I'd definitely want it in all black. Secondly, I have to wonder how well it actually works. It feeds the engine bay air, but it doesn't necessarily look like it feeds it right to the intake.
@SynergyMediaUSA
4 жыл бұрын
it does to some of the intake options out there. it does for the stock one also.
@MizzouRah78
4 жыл бұрын
@@SynergyMediaUSA That's good to know, thanks!
@Lateralgrip
5 жыл бұрын
Feels is subjective. Other than looks I'd bet no real gains from this piece. Oh and you really should reinstall the radiator duct/inlet. Crucial for cooling.
@SynergyMediaUSA
5 жыл бұрын
Harold Ortiz decided that I am going to re install the shroud.
@Lateralgrip
5 жыл бұрын
@@SynergyMediaUSA Good call! these little cars run hot and the ducting is there to maximize air flow through the radiator. Modern radiators are very small in application and need ducting to increase air flow. Where you having temp issues or hood flutter? I was going to order this and planned on modifying the ducting to fit. Thanks for posting the video.
@chtclimbing
5 жыл бұрын
Harold Ortiz did you do it yet?
@NClubFL
5 жыл бұрын
Cool video bro
@SynergyMediaUSA
5 жыл бұрын
Velo_n. Red2630 thank you.
@johnwesley3885
3 жыл бұрын
Using this with the stock airbox and bypassing the baffle by routing air directly to the intake port on the air box would be more effective. Did it myself...no big mouth but spin tyres easily, sometimes without even trying on a regular six speed manual elantra.
@servererror3170
3 жыл бұрын
Thats what i wanna do on my 2020 Elantra Nline
@illumidaddy7724
2 жыл бұрын
How would you do that?
@MrSunnyBhoy
4 жыл бұрын
Hi from Scotland! I have the Hyundai i30N performance, your cars sister , European version, what a car she is! Is yours a stick shift? Love that gearbox. So, your video was great, you made it look very easy as I'm sure it is. I will be getting one soon and using your video hope to install it myself :)
@SynergyMediaUSA
4 жыл бұрын
Yes, it is!
@ralkyrie8799
11 ай бұрын
I have the rally edition and same exact ingen intake also but I put a greedy blow off so that one hose coming off your intake in the front near filter, I simply sealed off tightly. Is that okay? As I'm always getting a error code now with relating to air flow. The BOV is correctly connected to the manifold. Greddy FV1
@cesarmelendez6058
5 жыл бұрын
Fits 2019 VT rspec?
@dm53
5 жыл бұрын
They have a different model that is specific for the non-N
@C-Serpents-Exotic-Snakes
4 жыл бұрын
Good video,will this fit any 2nd gen Veloster? I have a 2020 Veloster premium.
@SynergyMediaUSA
4 жыл бұрын
They do have them for it.
@C-Serpents-Exotic-Snakes
4 жыл бұрын
Synergy Media Thank you very much and subbed 👌
@chtclimbing
5 жыл бұрын
Are there any disadvantages like the possibility of sucking in water? That’s where I’m a bit skeptical about it. Also, have you hooked up the stock air box to see what breathes better
@SynergyMediaUSA
5 жыл бұрын
I do not see it being an issue with water tbh.
@hunger993
4 жыл бұрын
Any intake without a box is a hot air intake
@SynergyMediaUSA
4 жыл бұрын
hunger993 the heat shield helps with that
@hunger993
3 жыл бұрын
@@SynergyMediaUSA ugh and you didn't put the ducting back on? Bro wtf are you doing, that plastic duct you left out helps drive air to the rad.
@kimomaxmorin3656
5 жыл бұрын
Thank you
@BS-op8nj
5 жыл бұрын
Still running without the upper panel? Temps still at normal after the trip to Ontario as well I saw. Have you run it hard and at longer durations as well, without the Upper Panel? There's some interest on the subject this is why I'm asking. Take your time, use a dremel and cutting wheel, if you are going to show others the reinstall of the upper panel. Make a template and use it as a guide. Finish it off with some similar foam tape around the cut edges or some black vinyl cover metal weather stripping.;) . Are you data logging the IAT temps?
@SynergyMediaUSA
5 жыл бұрын
i have been running with out the upper pannel and have not noticed temps being higher to be honest
@BS-op8nj
5 жыл бұрын
Are your putting the Upper panel back on because you're actually having a problems with cooling or is it because, you're being influenced by comments to do so? Have you checked underhood temps and IAT's? Are you getting higher temp gauge readings?
@SynergyMediaUSA
5 жыл бұрын
B S i am putting it back on so i can show that it can be installed back on the car. I have not had a problem with cooling at all
@BS-op8nj
5 жыл бұрын
@@SynergyMediaUSA Thanks for the input!! I didn't believe there was a problem either. Just needed to make it apparent for others. Thoughts and comments, tend to run rampant and turn into idle gossip without the slightest bit of understanding.
@zaneelliott7538
3 жыл бұрын
When you installed your cold air intake did you need to tune it because it had more air or was it good?
@SynergyMediaUSA
3 жыл бұрын
it was good as is
@young_beast3336
4 жыл бұрын
Wonder if it fits 2020 Veloster 2.0
@johnnyappleseed9568
4 жыл бұрын
Hey dude , any issues long term running without radiator shroud ?
@SynergyMediaUSA
4 жыл бұрын
none at all actually.
@stormowen
4 жыл бұрын
I was wondering this too, are you sure?
@hunger993
3 жыл бұрын
@@stormowen don't do this. The guy who made this video is not smart.
@NormanBoulder
3 жыл бұрын
This is totally pointless without the factory intermediate piece that funnels air into the air box for the filter. Should have gone with the Sxth Element box to make this work. Total waste of time otherwise!
@deandillman9077
5 жыл бұрын
Does this void the warranty?
@SynergyMediaUSA
5 жыл бұрын
Dean Dillman in order for any aftermarket piece to void warranty it has to be a direct cause for the failure to the vehicle. This i highly doubt would ever void a warranty.
@bbbt8090
4 жыл бұрын
Dope
@SynergyMediaUSA
4 жыл бұрын
ty
@Grushdevah
4 жыл бұрын
add some googly eyes and IMMA FIRIN MAH LAZOR
@therustbucket8095
2 жыл бұрын
Anyone know if this would fit on a 2013 na veloster it has the stock grill cut out and screened and it's going to have a takeda cold air intake to tie it all together if it can even be installed.
@SynergyMediaUSA
2 жыл бұрын
i think they have one for the 1st gen
@jjnolms1967
5 жыл бұрын
That white car looks better than yours... What kind of car is that?
@SynergyMediaUSA
5 жыл бұрын
J. C. Ruiz haha. It’s my wife’s car. It’s a Kia stinger
@nstylemotorsportsracing1471
5 жыл бұрын
There both awesome love the vid can't wait to get this for my N.
@axelpagan1072
5 жыл бұрын
Where can I find this kind of intake?
@SynergyMediaUSA
5 жыл бұрын
Axel Pagan it will be available on their website very soon.
@alexandrospapadakis7511
4 жыл бұрын
any sound improvement on the exhaust with the velossa?
@SynergyMediaUSA
4 жыл бұрын
not that I noticed.
@stockey
4 жыл бұрын
You have a stupid plate in the front in California?
@SynergyMediaUSA
4 жыл бұрын
yup in CA we need to have the plate up in the front.
@tavo.simracing
3 жыл бұрын
@@SynergyMediaUSA where’d you get the plate holder?
@rcautofanatic5024
4 жыл бұрын
That injen intake sucking up all that fresh HOT air in the engine bay. Absolutely nothing cold air about these short ram intakes. Don’t know why ppl install them. That “big mouth intake” not even lined up with your hot air intake. Dude this is all wrong.
@Chingdogs
3 жыл бұрын
they sound the loudest by far though
@kukyno7190
7 ай бұрын
Yes, it's louder, it's a nice sound. But why ? the engine and turbo need cold air, not heat. It lowers the performance of the car rather than increases it. It does not make sense. And it also does not benefit the engine very much. And the mouth is not even flush with the filter. This is good for the original BOX@@Chingdogs
@kinghenrylx
3 жыл бұрын
this would void warranty correct?
@SynergyMediaUSA
3 жыл бұрын
For this to void it, it would be hard to prove it made something fail.
@TheBroconut
Жыл бұрын
Get rid of the music so we can actually hear what you're saying
@vr43000gtkid
5 жыл бұрын
How’s it feel with this ? Any difference in power ?
@SynergyMediaUSA
5 жыл бұрын
i did feel a difference this morning. on my drive to work. the purpose of the big mouth is to direct as much fresh air as possible since the stock duct is restrictive.
@vr43000gtkid
5 жыл бұрын
Synergy Media i understand this I was more curious of the fact you’re running an open air intake over the factory unit. I know the scoop is designed to be used with the factory air box. And I was curious if it helps feed cooler air to the open element
@SynergyMediaUSA
5 жыл бұрын
vr43000gtkid in my experience with other vehicles using this with an open intake it does help.
@CRBN27
Жыл бұрын
so you took out the shroud that keeps radiator cool and then a open "cold hair intake" which the air isnt even in line with the air filter. get a closed system intake and a turbo inlet. you literally downgraded your system yikes
@samuelsmith9180
Жыл бұрын
Hi that plastic piece he took off so he could install the big mouth Intake, does that pose any risk to the radiator/ engine..
@cindysue5474
5 жыл бұрын
I can see CHP fucking with you because of the CAI and pipe.Its best to keep the plastic one it will run much cooler then that aluminum pipe. Just feed that new part into the stock air box.
@1.slow5.0
5 жыл бұрын
No revs?
@621deezy
5 жыл бұрын
I hate when people sho an install vid with no startup or drive after
@SynergyMediaUSA
5 жыл бұрын
Bobby Wisdom this big mouth intake will not give an audible difference hence why no drive video.
@francojordan8048
4 жыл бұрын
Hot air intakes your fired watch the video. Especially with turbo cars. I have a Elantra Sport my engine bay temps were in the 150°when I had a ricer air intake.. that didn't last for long. Now I have built a HYBRIDTurbo assist true cold air to water intake system sram/lram Semi inclosed box.it uses 4 heat exchangers+and mini water-cooler sys. That's is meticulously place through the system which also heavily insulated. Now my IAT are around 50°to 60°f instead of 150°f And since Hyundai place the intake tube next to hot engine I had figured out how to Cool the whole system off inside and outside its a secret. And I recorded all My test results so none can call me a liar. My Prototype is worth around $2,000 to $3000 range. No one knows what feels like to be running cold air on a hot day. Or no one knows what it like to cool off your air before you drive if you car has been setting in the sun all day. And having a manual controlled HYBRIDTurbo assist I can turn up the boost to get even more colder air for more power. I will post some videos of my project. Because I'm tired of looking at these so called cold air intake and they are not. Ask any real racer mechanic engineer you need a designated artificial air plus outside ambient Air to see real gain's and your going to have to spend really money not $200 to $400 and think your on top of the world.
@Copboy1112
4 жыл бұрын
Less of that annoying music please!!!!
@SynergyMediaUSA
4 жыл бұрын
ok
@Pabs502
4 жыл бұрын
It seems like this guy just used the big mouth just for looks there is no attachment or logic on this 👎🏽👎🏽
@btw8775
4 жыл бұрын
There is plenty of logic, even if it’s not directly lined up with the filter, it’s still a pushing a concentrated amount of cooler through the engine bay near the filter.
@healthyhim
2 жыл бұрын
Waste of money
@Chingdogs
3 жыл бұрын
was this worth buying mate? please be honest, thanks mate
@SynergyMediaUSA
3 жыл бұрын
To me it was
@Chingdogs
3 жыл бұрын
@@SynergyMediaUSA did you notice a difference at all? i have the same setup on my Cerato GT (forte GT in usa)
@Kaged_vn
2 жыл бұрын
Everyone crying so bad 😂idc if it works or not at least I’m getting more air 🤌🏽
Пікірлер: 111