great video but one question I put up the other type of light that you had where you can adjust the angle the 3 blades and couldn't use it with the motion switch b/c it would just continue to flicker. I'm assuming these UFO lights don't have the same problem. Any knowledge on that?
@EverydayBuilds
2 жыл бұрын
I did not have that issue with mine. I do not know what would cause them to flicker like that. I know some bulbs aren’t compatible with dimmer switches, so maybe some aren’t compatible with motion switches. Thanks for watching!
@theaustralianconundrum
Жыл бұрын
@@EverydayBuilds US$40.00 each = automatic Chinese junk. Not US standards approved and all delivering a 1/4 of their claimed Lumens. Total scam. For your information 65,000 Lumens is provided by a single 750 watt Osram Powerstar metal halide bulb that cost approx US$200-250 each. To get 65,000 Lumens with LEDS at your ceiling height would set you back at least US$3,500-$5,000 installed. They will all be actively cooled and made to US safety compliance standards. The USA actually make a large range of very high quality LED hi bays however they are in the order of 10-20 times the US$40.00 POC you hold in your hand at time stamp 2:41. Get real kiddo.
@thudthedestroyer515
Жыл бұрын
TOP notches for cloning yourself! Nice Touch! Thanks for the VID!
@EverydayBuilds
Жыл бұрын
Definitely comes in handy, lol
@RobBastien
2 жыл бұрын
Hey, thanks for doing this, having a camera in the attic is not easy. Great job.
@EverydayBuilds
2 жыл бұрын
Yeah, definitely not. Especially when it’s about 115 degrees up there, lol. And you are welcome!
@djjammindave
Жыл бұрын
AM SURPRISE THOSE BLUE BOXES STILL HAD THEM TABS, THE WAY YOU THROW THEM AT FIRST, LOL.....
@EverydayBuilds
Жыл бұрын
Lol 😂
@petenelson8136
2 жыл бұрын
Man, I need to find out how to clone myself, great trick and sure makes the job go faster 🙂
@EverydayBuilds
2 жыл бұрын
Lol, cuts the job in half 👌
@zacdeen27
3 ай бұрын
Really liking your channel! Are the lights still working without issues? And for screwing in hooks and eyebolts, I’ve always had success with putting a separate hook into a drill and using that to run the hook/eyebolt up into the wood instead of a screwdriver.
@EverydayBuilds
Ай бұрын
That's a great tip and the lights are still working great 👍
@StuartSanborn
Жыл бұрын
that's the kid of box throwing kids need to learn!
@EverydayBuilds
Жыл бұрын
Lol 😂
@onedyl원딜
2 жыл бұрын
Are these durable? I wanna know if they'll last. Great video!
@EverydayBuilds
2 жыл бұрын
All I can say is they seem to be built really well and LEDs typically last 10-20 years. And doing the installation this way makes it very easy to swap out if there ever is an issue. Thanks for watching!
@skeon67
3 жыл бұрын
Nice job
@EverydayBuilds
3 жыл бұрын
Thanks!
@IceBikes2008
7 ай бұрын
Why outlets instead of snipping the plug off the lights and wiring them to the existing light runs? Fixing to do a similar swap but trying to figure out the best approach!
@EverydayBuilds
7 ай бұрын
I did it that way in case one ever dies or I want to switch them out for different ones. Easy to just unplug and swap them out 👍
@Ladosligese
Жыл бұрын
nice video .. the hook tho ? .. tad overkill dont you think ? .. as in "oh my lord are you going to hang a car from it?"
@EverydayBuilds
Жыл бұрын
Probably, lol
@Belg1970
Жыл бұрын
What's the recommended spacing on these units?
@EverydayBuilds
Жыл бұрын
It varies based on ceiling height.
@Belg1970
Жыл бұрын
@@EverydayBuilds Is there a calculator for the company somewhere?
@pete7894
7 ай бұрын
So what was the spacing in feet ? thanks
@EverydayBuilds
7 ай бұрын
I don’t remember exactly, but I think they were all about 8’ apart.
@patrickpeterman8736
2 жыл бұрын
Do you think these would be o.k. to use hanging over a homemade paint booth-if there waterproof they might work?? what do you think?? great video,s thank you, PJP
@EverydayBuilds
2 жыл бұрын
I don’t see why not 🤷🏻♂️ Mine are consistently covered in sawdust and I have had no issues, lol.
@kristenscott9286
3 жыл бұрын
Can I borrow your cloning machine?
@EverydayBuilds
3 жыл бұрын
I don’t see why not, lol
@awilson8385
10 ай бұрын
If u turn the power off before messing with the outlet there is no use for the electrical tape........
@EverydayBuilds
10 ай бұрын
👍
@gregmize01
2 жыл бұрын
👽👽👽👽 🌞🌞🌞🌞
@luyimin481
3 жыл бұрын
Super cool video. Can u pls help take a video like this one? I will paying for you.
Пікірлер: 38