Idk how you were able to fit it so perfectly. When I attempted mine there was definitely a gap
@YangLimitz
Жыл бұрын
Heat gun is the way we did it. Lay the piece on the bumper then heat it in a forward and back motion to not burn the panel
@sethwigley
Жыл бұрын
Never seen someone blink as much as you. Diffuser looks good!
@YangLimitz
Жыл бұрын
Shoot its cold out and drying my eyes up lol
@sethwigley
Жыл бұрын
@@YangLimitz I joke! Good work bro
@YangLimitz
Жыл бұрын
@@sethwigley 💯
@killavictoria
Жыл бұрын
Thank you for this video, im gonna have to be doing this all by myself so this was helpful 😭
@YangLimitz
Жыл бұрын
Just take your time doing it, will be worth it in the end 👍
@killavictoria
Жыл бұрын
@@YangLimitz took literally hours and i ended w gaps unfortunately even trying to mold it🥲
@Travis.Rivera
Жыл бұрын
You dont need to use a drill , yofers kits come with self tapping screws
@BboymaYnard0
Жыл бұрын
Nice brotha. I’m still waiting for one for the hatchback models.
@YangLimitz
Жыл бұрын
Itll arrive just gotta give em time to r&d pieces for the hatch
@BboymaYnard0
Жыл бұрын
@@YangLimitz facts. It’s a waiting game now since I’ve been waiting for a year now. Haha.
@chrisdesimone4249
10 ай бұрын
Me too!
@Pyrrho_
3 ай бұрын
Haha, another Wisconsin Si owner. With that black chin have you thought about switching to black Honda badges? Maybe removing the "CIVIC" lettering and leaving the SI? I did; with black Road America plates I think it looks extra sharp.
@yourleafyourlife5734
Ай бұрын
I have a 24 si, plat. white pearl. I replaced both honda badges AND the civic lettering with black letters. I left the letters off for a days and then tried with the letters on. It looks damn sharp with clack "CIVIC" lettering and badges!
@Cross_93
Жыл бұрын
You look like the kid from gran torino that clint eastwood mentored.
@martinpolanco5681
5 ай бұрын
I know what you mean. I'm still looking for videos on how to install an updated infotainment system on honda civic 11th Gen
@pamizy1275
Жыл бұрын
Very clean man thinking about getting it soon
@YangLimitz
Жыл бұрын
No regrets
@ezequiel3827
Жыл бұрын
Feel like I’ve seen you near me before, south Milwaukee area. Clean asf.
@ADJ161996
Жыл бұрын
Perfect fit. Awesome work man. Subscribed!
@YangLimitz
Жыл бұрын
Appreciate it 👍
@misrble
Ай бұрын
would do the reflectors above
@ambush1719
Жыл бұрын
Get video, hope to get one for my civic soon
@gatordontplay8161
Жыл бұрын
Hey bro, did yours have any specific markings showing it was a Yofer? I got mine in from eBay today and I am missing the plug and play light, 3m tape and the screws.
@YangLimitz
Жыл бұрын
Not that I remember but mine did come with all the stuff, tape, screws, etc
@yourleafyourlife5734
Ай бұрын
I got mine last week and installed it. The bix it came in had "yofer" lettering, pretty big, too. I got it from swa motorsports. The only gripe I have is the lack of instructions. I was able to get a very clean install by watching YT videos, but I think I missed a couple of things that would have made the install much easier. It took me and Wifey 3.5 hours total.
@Ghzty
8 ай бұрын
yo i’m new to wisconsin and i got a 2017 civic idk if we could meetup sometime
@Jon_Aten
Жыл бұрын
Were you able to put the mud guards back on with this kit?
@YangLimitz
Жыл бұрын
Mud guards didnt fit with the rear lip on. But you can modify/trim the flap to fit around.
@JoseMorales-cv3td
11 ай бұрын
Yoooo. Does tape hold up perfectly?? Mine always comes off man. Any bracket i can possibly use? Drill it maybe? Or just keep using tape??
@YangLimitz
11 ай бұрын
I had to apply 2 double side tape on one another to make it thicker and that worked. But one of my other side is slowly coming off. Gonna grab some stronger double side
@jessefisher2870
2 ай бұрын
So did yall use the tape that came with it? There will be times where i have it taped in the same spots yall did, and it comes loose.
@YangLimitz
2 ай бұрын
Only used supplied tape for the big longer rear peice. The driver and passenger sides we had to double layer on the tape so itll make contact on the bumper.
@tristrog9310
10 күн бұрын
Yeah mine did the same in some spots, that tapes not very good I’m gonna have to pull it off soon and redo it with 3m tape
@Ashleeowb
Жыл бұрын
How much is your car insurance just out of curiosity I know it’s different throughout states
@droseand1
Жыл бұрын
About 350/mo. for a ‘23 Si. 23 yr old male, TX
@scottarnold8637
Жыл бұрын
150/ mp 23 civic si 37 male florida
@TFive520
Жыл бұрын
I tried the tape that came with and also vhb. My diffuser keeps pulling near the curves by the rear reflectors. I've cleaned it with 91% rubbing alcohol. Idk what else to do!
@YangLimitz
Жыл бұрын
Gotta heat it up some more so it molds to the curve of the rear bumper while pressing the piece onto the bumper
@kevinadkins1908
Жыл бұрын
I’m having the same exact issue! Just ordered a heat gun and 3m adhesion promoter!
@user-ty9wd3ee3h
8 ай бұрын
I would think you would have to be careful using a heat gun and not messing up the paint.
@WillK3GT
10 ай бұрын
Is that the stock exhaust? I have the same Yofer diffuser in my garage right now.
@YangLimitz
10 ай бұрын
Yes stock exhaust, car looks much better with the rear diffuser on 😎
@tonnyyFL
Жыл бұрын
I put mine on but the 3m tape seems to be peeling off or stretching what did u do?
@YangLimitz
Жыл бұрын
When applying the piece on the car, have to heat up the tape and the piece then place on rear bumper and apply heat again to mold it to the rear bumper
@emersonmaughan5075
Жыл бұрын
What size drill bit did you use to drill the holes in the diffuser?
@YangLimitz
Жыл бұрын
Tbh I just used the smallest one thatll fit the screw. Better to drill a small hole than a big one and mess up.
@ElViperr408
Жыл бұрын
How much for you to install mine lol. I’ll repay you with some wingstop and beer also you don’t have to do any wiring for the lights?
@maxthor5895
Жыл бұрын
You have to wire them they are in the video 😑
@ElViperr408
Жыл бұрын
@@maxthor5895I said wire them meaning cutting the tape to connect the wires to work
@YangLimitz
Жыл бұрын
It just wires into the brake light like done in the video, no cutting. Dont wanna do it again unless its a diff style rear design.
@ElViperr408
Жыл бұрын
@@YangLimitz I should of waited cause I had one that needed to be cut. Now I’m definitely picking this one up soon!
@Hoop_23
7 ай бұрын
How much to put mine in?
@Gomez77756
10 ай бұрын
Where can I get that cable to connect the light?
@YangLimitz
10 ай бұрын
Mine came with the rear lip, idk where you can buy just the wire it self. Maybe try calling yofer and see if they sell separate
@GodOfWar-mx6ji
2 ай бұрын
Will this fit my 2023 civic sport?
@YangLimitz
2 ай бұрын
No only for si model.
@hugenerd8994
Жыл бұрын
4 months later has the panel come apart at all? is the 3m still sticking? Ik theres screws on the bottom of the diffuser but not the top, hows the fitment now 4 months later???
@YangLimitz
Жыл бұрын
Its still on like the day we slapped it on 👍
@hugenerd8994
Жыл бұрын
@@YangLimitz that’s totally badass, thanks for the quick reply man, truly! And sick car hope my diffuser turns out the same haha!
@Edlimited
10 ай бұрын
Man would this work on a touring trim?
@YangLimitz
10 ай бұрын
Dont think so since different bumpers
@ImmutableIcarus
Жыл бұрын
Do you worry about the exhaust melting the diffuser?
@YangLimitz
Жыл бұрын
Exhaust is no where near the diffuser tbh
@ImmutableIcarus
Жыл бұрын
@@YangLimitz sweet lol my diffuser comes on Tuesday 😁 can’t wait to install
@YangLimitz
Жыл бұрын
@@ImmutableIcarus Will be worth it
@roydi5122
Жыл бұрын
Would that fit on a 2023 honda hatchback?
@YangLimitz
Жыл бұрын
I dont think it will fit since the sedan and hatchback have different rear bumper designs.
@prestonault599
2 ай бұрын
what screws did you use
@YangLimitz
Ай бұрын
They were supplied in the kit
@itsricksung
Жыл бұрын
Will this fit the civic sport 2022?
@YangLimitz
Жыл бұрын
This will not fit directly since the rear bumpers are differently shaped
@itsricksung
Жыл бұрын
@YangLimitz that's strange bc hrs site made it seem like it'll fit sport model. 😥
@YangLimitz
Жыл бұрын
@@itsricksung TBH that I do not know, best to call the company and see what they say. I just know the bumpers are different from si to sport
@DeadpoolBIH
Жыл бұрын
it will, i have one
@itsricksung
Жыл бұрын
@DeadpoolBIH oh OK thank u so much!!!
@chrisdesimone4249
10 ай бұрын
LOOKS BAD AZZ FOR SURE - Great video guys! I like the Honda tape u added, looks like you are anal like me about the fit lol - A good thing for sure, nothing like the satisfaction of doing it yourself.
@TRDRBR
Жыл бұрын
Don’t make your car trashy
@wolf_among_sheep7875
3 ай бұрын
I can’t see 😂 yeah we can’t either with that 1980’s utility light 💀
Пікірлер: 84