My cluster doesn’t pull foward after unscrewing the screws like your video I don’t wana rip the cables
@2H2521
11 ай бұрын
Great job!
@Captgreatvalue
Жыл бұрын
Where did you order the led lights from I’ve been looking for aftermarket clusters but no company seems to want to make any so I was thinking of going custom and making my own on my 92 ranger
@Badger-fm2hw
14 күн бұрын
hi
@vasi5518
4 жыл бұрын
Man, how do you take the knob thing off under the middle of the cluster? does it just unscrew?
@kobyluebbers9708
3 жыл бұрын
It comes off
@cameronwilliams6473
Жыл бұрын
Twist the clip and pull.
@brandoncain4832
8 жыл бұрын
Can I change the color of my faded, barely working green lights by using red LEDs or would it not work
@WilliesBuilds
8 жыл бұрын
Unfortunately that won't work usually the numbers and graphics of the cluster are made of a film that has a green tint to it so it will be green no matter what but ive heard of people who scrape the back of that film off.
@josephanthonycacioppo798
6 жыл бұрын
I see you used two different types and size of LED bulbs for the instrument cluster how many do I need of each size so they fit properly ? I see you have about 15 of them.
@murrayshekelberg9754
3 жыл бұрын
Thanks for sharing. Just bought a 94 B2300 and was looking for something like this
@santyc10
4 жыл бұрын
the led video size it works in a ford ranger 1991??
@timekeeper46
8 жыл бұрын
Great tutorial. I have a '93 Ranger which is about the same. I plan to replace with regular #194 bulbs so as not to have to deal with the polarity of the LEDs. Thanks!!
@WilliesBuilds
8 жыл бұрын
yeah stock bulbs work nice as well just wanted something a bit brighter . hope it works out for you
@tylerstawski6396
7 жыл бұрын
How did you get the dash face off? Tried prying edges and feels like it wants to break. 1994 manual ranger too
@erichabursky8613
4 жыл бұрын
How many bulb did u use
@tylerstawski6396
7 жыл бұрын
I also have a 1994 manual ranger. How do you remove this dash?? Do I need to unscrew anything or can I simply pry it off? I used a decent amount of force and it didn't seem to shake anything loose.
@WilliesBuilds
7 жыл бұрын
If it's just the bezel you want to remove you just have to pry it and pull it hard pry all around the edges . Some clips will break off tho
@shanethepain
8 жыл бұрын
so whats the difference between the 2 different LEDs u posted at the end of the video? which ones should we be installing? Thx
@TrickHub
8 жыл бұрын
the bigger one is a bit brighter bc it has more LEDs but either one can be used throughout the cab of the truck fits everywhere
@navyguywandell
8 жыл бұрын
how many bulbs did you need? 14 for the cluster but how many for the heater control?
@WilliesBuilds
8 жыл бұрын
I know it's an old comment but I believe it was just one bulb in there . thanks for watching
@spaceweid8546
7 жыл бұрын
Is there a specific size of the bulbs? Or do you have a link where I can buy them?
@ganonpig
5 жыл бұрын
I wish my interior looked as great as yours, lol
@TheAnonymous1one
4 жыл бұрын
Did you recall which brand led you used?
@tadair705
6 жыл бұрын
A couple additional tips and a question: You have to unplug the cigarette lighter. The two wire harnesses are pinch clips. You need to squeeze them on the ends so they will come out. Do the right one first as it's the easiest to get to. Question, how in the heck do I get my fat hands behind the instrument cluster to even get to the plugs? I need arms and hands like Groot!
@koreyn9887
6 жыл бұрын
How is that at night though? Is it overly bright?
@tylerfabish5578
4 жыл бұрын
its not that bad honestly. I'd rank it up there with the modern cars with the LCD screens or high output dash lights, if you know what i mean
@MrBaughla
8 жыл бұрын
WilliesBuilds, I'm replacing my dash bulbs, thanks for the video just gotta get past those damn clips holding it in. My main question is actually about your radio. I'm doing an aftermarket Kenwood swap with the factory. I'm having trouble figuring out the actual dash mounting kit, how did you do it? Thanks.
@tylerstawski6396
7 жыл бұрын
Levi Baugh how did you remove your dash cover?? Mine is a 1994 and a manual. Do I just pry that dash piece away?
@slayerjohn447
6 жыл бұрын
Crutchfield.com has instructions to install/remove radios from a very wide variety of models. This comes free with any purchase of radio or speakers but it cost like $9 for just the instructions.
@jmarty409
7 жыл бұрын
Great straight forward video. Thanks for posting, was a big help to me.
@therandomguy4821
7 жыл бұрын
how did you install your radio did you use a dash kit install for that year make and model if so can you please tell were you got it from please thank you. I also have a 1994 ford ranger
@johnwymer1215
Жыл бұрын
No dash kit needed
@ianwinfield929
8 жыл бұрын
+ What are the different size LEDs for?
@garyoxton1499
7 жыл бұрын
Ok...so how do i take out the dash when it's an automatic......won't pull forward because of the shifting linkage................ :(
@davidwhittemore4191
7 жыл бұрын
Put the shifter down into low 1 gear. Then you can pull it by.
@dustincampbell8734
6 жыл бұрын
You have to take the lower dash plastic off and there will be a cable that comes out of the back of your instrument cluster. Youneed to takethe 1 bolt off of the end of the cable and then take the cable off of the shifter housing
@doogiehouser594
8 жыл бұрын
Willie, you do a very good job here. You could use more light, but you still do an excellent job. Nice, informative, with no B.S. that most Vids give. Keep them coming!
@WilliesBuilds
8 жыл бұрын
Doogie Houser Appreciate the coment! , I have some more videos coming soon.
@slayton633
7 жыл бұрын
how can you make the dash light up red?
@TrickHub
7 жыл бұрын
Dylan Slayton the only way would be to scrape or sand away the green film behind the numbers so that they loose the green tint and be sort of clear and then just install some red L.E.D
@nicholashall9996
4 жыл бұрын
Your such a big help thank you so much
@paxtonkington9186
7 жыл бұрын
But do these LEDs dim?
@TrickHub
7 жыл бұрын
Paxton Kington yes they do but very little
@5070eg
8 жыл бұрын
what is the bulb size?
@lilskippa2574
7 жыл бұрын
What size bulb
@TrickHub
7 жыл бұрын
4:35
@mauliher85
8 жыл бұрын
La intensidad de la iluminación se puede ajustar? 💡
@WilliesBuilds
8 жыл бұрын
si amigo se nota el ajuste pero es poco. gracias
@Cyberdactyl
7 жыл бұрын
Good Video. Thanks
@oldcratch
5 жыл бұрын
Did you say..."corn tray"? The hell is a corn tray?
@TrickHub
5 жыл бұрын
Your absolutely right ! Didn't you know that's where you keep the corn 🌽?
@tylerfabish5578
4 жыл бұрын
NOTE TO ALL: I just did this on my 93. Same dash, manual transmission (so no shift indicator cable to remove). IT IS 100% POSSIBLE to put new bulbs in without undoing both wire plugs. I popped the one closer to the driver side but couldn't get the other one. I ended up using a picture of the backside and feeling around with my fingers to find each bulb and swapping it out. It's easy enough. Excellent mod, highly reccommended.
@jacobog3221
2 жыл бұрын
Hey did u put in simple white LED’s? I want to put red ones but heard that theres a film inside that reflects the green color at all times
@tylerfabish5578
2 жыл бұрын
@@jacobog3221 yes go with white. red will look bad because of the green film
@_SMITH1K_
5 жыл бұрын
I just want to say thank you for your help. I just put pink LEDs in my 93 4x4 cant wait till night time.
Пікірлер: 60