I really enjoy your videos, I'm in an instrumentation course at my local city college and you teach and explain things better than my teacher honestly. Cant wait for more!
@InstrumentationControl
4 жыл бұрын
Hi Sean, I'm glad you are enjoying the content. Keep at the education, its a great career field. Are there any topics you would be interested in seeing covered that I can bear in mind for future videos? If you are interested in checking out my engineering community chat support check out www.patreon.com/InstrumentationControl
@ElectricBuckeye
2 жыл бұрын
You missed one key tool. The crossword puzzle. I'll elaborate. It brings forth a mental condition where the mind solves puzzles. This is a good primer before troubleshooting during the next job. Mental preparedness.
@ambertimthibodaux8815
3 ай бұрын
I highly recommend a solenoid magnet too. It’s a lot better than carrying around 3 9v batteries for that instance you need to actuate a solenoid locally. I’d say that falls along the lines of a “specialty too,” but every technician will encounter a need for it at one point or another
@InstrumentationControl
4 жыл бұрын
Check out the links in the description if you want these tools for your own tool kit! ▶▶Check out brilliant T-shirts / Merch at my store: www.redbubble.com/people/rudd4y/shop?asc=u ▶▶Check out my website for more articles on Instrumentation: www.instrumentationcontrol.info/articles
@cbr-BaMM
Жыл бұрын
I'm just starting my journey into electronic instrumentation Tech. And your videos are helping me out a lot. Thanks, keep them coming 👍🏾
@mikeg1871
4 жыл бұрын
I'm about to jump in this field..been a pipefitter for 7 years but this looks more intriguing
@InstrumentationControl
3 жыл бұрын
Its a great and interesting role. Always a challenge to beat
@I_SuperHiro_I
2 жыл бұрын
I’m jealous. I work on Elemental Analyzers (CHN, CS, ONH, Thermogravimetric, Calorimetric). I wish my company would buy us these.
@Adrianyoutubing
3 жыл бұрын
Definitely do a bench/van/base tool setup.
@bfaissal1182
7 ай бұрын
Thank you for all what you do it's great
@farmerdave7965
3 жыл бұрын
As an instrumentation technician, besides that Fluke, the tools I use the most are plumbing tools.
@therinni2347
3 жыл бұрын
Depends a lot on where you work. It's interesting to see/hear about other techs experience in the field and what they use.
@I_SuperHiro_I
2 жыл бұрын
What kind of instruments do you work on? I work on elemental analyzers.
@MichaelButingting
3 жыл бұрын
I learned more in your video 👍👍👍
@InstrumentationControl
3 жыл бұрын
Glad it was helpful!
@duanedickey7043
3 жыл бұрын
A good flashlight is essential as well. I use an LED headlamp on my hard hat.
@InstrumentationControl
3 жыл бұрын
Thats a great point. Always useful especially hands free
@puttz2
3 жыл бұрын
Agreed its great to have the hard hat light and also a pen light.
@tanveerkhan9221
3 жыл бұрын
The bootlace ferrule crimper is so expensive but it's worth it
@InstrumentationControl
3 жыл бұрын
Totally agree. Unfortunately if you want tools to last you have to pay for the privilege most of the time
@kieranhimself3655
3 жыл бұрын
Just take one from work
@eucarisrodriguez7641
3 жыл бұрын
Your videos are lit and helpful
@InstrumentationControl
3 жыл бұрын
Thankyou! Glad you are enjoying the videos :D
@vladislavkorolkov8957
Жыл бұрын
Thanks for your video and especially for the linked recommended item models, Chris👍 Well, as for me, while doing any technical repair at home I'm always trying to avoid usage of adjustable spanners as much as possible 'cause they mostly don't give a good grip and can easily get a bolt head rounded or sort of. But they are really widely used on sites, especially when there's no a proper size combination spanner at hand.
@waseemomran1341
4 жыл бұрын
Thanks
@williamcollett4726
4 жыл бұрын
Great video Chris, I also use lots of wera, facom and bahco tooling. Do you have any videos on pressure gauge calibration with a dead weight tester?
@edgar175
2 жыл бұрын
Awesome vids. No wire strippers?
@Adrianyoutubing
3 жыл бұрын
Not sure but I'd add a laptop, a bag of connectors/adapters, and a load of jumper wire/croc clips....
@InstrumentationControl
3 жыл бұрын
Always useful for connecting to Instrumentation / PLCs.
@leef2267
4 жыл бұрын
Great video! Please could you make a video on the calibration of instrumentation?
@InstrumentationControl
3 жыл бұрын
Hi @Lee F check out my latest video on calibration!
@hetanhawke1695
4 жыл бұрын
great video Mr
@InstrumentationControl
4 жыл бұрын
Glad you liked it!
@OlympusHeavyCavalry
3 жыл бұрын
There are other digital multi-meters out there other than fluke that are just as capable.
@InstrumentationControl
3 жыл бұрын
Very true, it think it comes down to brand confidence too
@freethinker3435
Жыл бұрын
Nice
@InstrumentationControl
Жыл бұрын
Thanks
@phoebebaker1575
Жыл бұрын
Nice!
@InstrumentationControl
Жыл бұрын
Thanks!
@astzgamer
2 жыл бұрын
Just discovered your videos. I am in the 3rd year of a 3.5 year course, I am doing the course in Germany. Over here it's called "Mechatroniker" but I think it crosses over heavily with your trade. Any thoughts about that? Are Mechatronics well known in your field?
@InstrumentationControl
2 жыл бұрын
Hi Paul, Although a similar discipline in terms of working principles, its very industry dependant. Mechatronics isn't a recognised field in the oil and gas industry as its mainly aims at production line industries (automotive etc)
@astzgamer
2 жыл бұрын
@@InstrumentationControl interesting! I work in the energy sector (power plant? , generation), maybe that's why I see more comparisons?
Пікірлер: 46