@Threemicsrecords Lots of IDG could be an indication that the stylus is worn. Using the adapter shouldn't cause too much trouble as long as the arm can handle the extra height. :) JC
@EzeeLinux
13 жыл бұрын
@arndur Get a Technics Overhang Gauge or measure 52 mm from the rear rubber washer (the edge closets to the plug) to the stylus tip. Make sure the cart is PERFECTLY straight in the headshell. You're done. That's it. Make sure you are tracking the M97xE at 1.25 grams at the stylus tip. If you use the stabilizer brush, that will mean setting the tracking force to a total of 1.75 and setting the anti-skate to 1.25. If you run with the brush up all the time, set the tracking force to 1.25. :) JC
@nelsonlowell
7 жыл бұрын
the best of all the "how to" turntable videos on you tube.
@ScottyD
11 жыл бұрын
You're welcome... don't forget to LIKE, SHARE and SUBSCRIBE! Tell all your friends about this channel. I appreciate you being part of the TechErtainment community! :)
@The1970sInfatuate
13 жыл бұрын
A good affordable cartridge with a spherical stylus I just came across is the Sumiko Oyster. The tracking force is between 1.25g - 2.5g.
@Samlant
10 жыл бұрын
Thank you very much for showing, and emphasizing, that you turn the 'Indicator' knob after you zero the tone arm out! That's exactly what I was wondering about and wanted to know! I didn't know you could turn the gauge knob independently of the counterweight, which was why I was confused about why people would still only go to exactly "1.5 grams" Thanks very much for your detailed explanations!
@georgedoughly6344
5 жыл бұрын
It’s Joe Collins! I really like his Audio videos!
@joshkelnhofer5454
8 жыл бұрын
terrific explanation of cartridge set up. I was trying the protractor on my SL-D2 and it was very frustrating. I will be acquiring a SL-1200 with the jig in the coming months, but for now I will try the 52mm measurements.
@JamesSmith-ru7mm
10 жыл бұрын
With regards to adjusting tonearm height a key thing to keep in mind is that records are different thicknesses so you could get it perfect on 1 record and then go to play another and it'll be off slightly. For this reason you're only ever going to get it approximate and personally I wouldn't add an extra mat to raise the record up if it was that far out I would adjust the tonearm height.
@ScottyD
11 жыл бұрын
Rob, JC and I used to partner with video's on this channel a while back but he is not affiliated or associated with this channel anymore. He and I are still very close friends but his focus is now on his channel. Scotty D
@weasel2htm
13 жыл бұрын
Bless You J.C. for making this video, this contains the info I have needed to learn for years, but wasn't really sure where to look. Well, done, I proclaim this video to be the official "Turntable Setup For Dummies." video.
@EzeeLinux
13 жыл бұрын
@Paspiedreamcast It's not hard at all. Once you do it a couple of times you don't even think about anymore. :) JC
@EzeeLinux
13 жыл бұрын
@The1970sInfatuate Yes. Turntables are designed to give approximatively the right amount when set that way. Tyhe only way to fine tune it is with a test record and an oscilascope. There is a method where you use a blank record and set the anti-scate by watching that the tone arm does not move either way but it inaccurate and usually results in way too much force on the dial. Therefore, the 'same as' rule is the best way to go. :) JC
@GaryNorton_C
13 жыл бұрын
Ortofon makes the S arm cartridge replacement easy as it eliminates one of the adjustment steps I am using a DJ S on an Ion ITTusb and the results are good. I have never been sure that I had the downward force just right the video is well done. I am going to re check my setup based on the video. Thanks and a second "Well Done"
@EzeeLinux
13 жыл бұрын
@LennyTorment I think so... Every Pioneer with an 'S' shaped arm that I've seen has an overhang of 49 mm. :) JC
@jimvad
7 жыл бұрын
Thanks for your video. Easy to understand. Helped me set up my Technics SL-3200 today.
@eduardomejias1689
8 жыл бұрын
Thank you very much for your great help!! .... I know now what I was doing wrong with my new Audio Technica AT-LP120 turntable needle set up. Thanks again and greetings from Albury NSW in Australia. Eddie---
@EzeeLinux
13 жыл бұрын
@MagnusVideos Thanks. I searched YT before posting this and I couldn't find any videos that really covered the subject well. :) JC
@HenryChinasky
10 жыл бұрын
Wow, great tutorial, very useful. Thanks a lot.
@MBroadus
8 жыл бұрын
Thanks so much! Received a new Denon DP300-F TT with Ortofon 2M Red Cart from Needle Doctor and this helps a lot.
@fidelios_frequency
13 жыл бұрын
I'll look around for the Technics Gauge. In the meantime I set the cartridge at 52mm. Sounds good! I previously had it at 50mm according to the protractor. Thanks for the help!
@EzeeLinux
13 жыл бұрын
@wings19fan The proper tracking force for the DJ S is 3 grams. Ortofon is one of the few companies that actually specifically lists a recommended tracking force. Integrated carts are great as long as you know you have a Technics compatable tone arm. Yours is for sure. :) JC
@t.n.silverman7545
10 жыл бұрын
Nice video. Thank you! One comment: Anti-Skate is actually the force that counters the natural tendency of the tonearm to move inwards, not off the turntable. Contrary to the common belief, it is not the centrifugal force that makes the tonearm want to fly off the turn table, it's the offset angle of the headshell, together with the friction of the stylus with the grooves that causes the opposite - a force that pulls the tonearm inwards. Anti-skate counteracts that force. Cheers Tom
@EzeeLinux
13 жыл бұрын
@MagnusVideos Yes. There are a couple of good one's on the market. You really need a scope to get the most from them and I find that a bit over the top for the average home user. However, I remember my days in radio and the engineers never setup a new turntable without getting the test record out to fine tune everything. :) JC
@socksumi
10 жыл бұрын
There's a lot of good info here, but just one nitpick regarding stylus pressure. There is no universal pressure for a particular cartridge brand or stylus profile. Stylus pressure is mostly dependent on the compliance and tip mass of a particular cartridge and of course it varies considerably from model to model. It's best to follow what's recommended by the manufacturer for that model. Best results and optimal tracking are usually obtained in the top half of the manufacturer's recommended range. A good test record such as the Shure ERA is a great tool if you can get one. Arm mass, bearing friction and record type can also influence optimal tracking force but if you're in the top half of the manufacturers recommended range you're in the ball park.
@SDsailor7
11 жыл бұрын
Hi JC, I did not know that you had this channel also, i just discovered it. And of course i subbed..I am already a subscriber of your other channel, "badeditpro" and like all your videos, very informative. Best regards Rob
@EzeeLinux
13 жыл бұрын
@Paspiedreamcast Don't worry... It's really very simple and once you've done it a few times you don't even think about it anymore. Besides, the DD33 doesn't require any setup... Just stick a cart on the tone arm and start playing records. :) JC
@soloripper7
8 жыл бұрын
There was an ad in the beginning showing someone putting something in a microwave and I thought it was the video. Lol.
@ScottyD
8 жыл бұрын
Sorry... I can't control the incompetence of the KZitem algorithm that selects what ads are played. :)
@soloripper7
8 жыл бұрын
Scotty D That's fine I thought it was funny.
@quilope
8 жыл бұрын
You were just confusing records and compact discs. Step 1 for CD's is: put in microwave. You're welcome!
@shilloshillos
8 жыл бұрын
Very articulate and clear information. Thank you.
@rlwings
5 жыл бұрын
Better to check anti-skate dynamically by pacing the stylus on a groove-less record or CD and watch the tonearm. Adjust anti-skate as needed to stop the needle from moving in or out. Then you have the actual neutralized position...The dial numbers are rarely exact. But testing dynamically will give the actual in-use position.
@EzeeLinux
13 жыл бұрын
@arndur You should be good to go now. :) JC
@Kimberlystjohn
8 жыл бұрын
Thank you! Very helpful!
@EzeeLinux
13 жыл бұрын
@nemru Thanks! I have touched on compliance in the past but finding hard and fast information to share is a bit difficult. Most of the cartridges (MM) being sold today are just about the same in that area. I have not had much interest in MC carts from viewers so I really haven't talked about them. MC tends to be more compliant and needs a low mass arm. :) JC
@georgedoughly6344
5 жыл бұрын
The Overhang on a Sony turntable is 49mm also, just like the Pioneer.
@SupraWes
13 жыл бұрын
Good video, the only other thing I would suggest is leveling the turntable itself.
@pharmd718
8 жыл бұрын
Very helpful. Thank you
@robinfoxx4339
8 жыл бұрын
This was a very helpful video! Good and clear information! Thanx!
@EzeeLinux
13 жыл бұрын
@SupraWes Thanks! I figured putting the turntable on a level surface would be pretty obvious... :) JC
@legOldtimer
13 жыл бұрын
Very good video, especially for beginners. Will promote the video by Twitter. Thanks for posting.
@EzeeLinux
13 жыл бұрын
@The1970sInfatuate Try Needle Doctor or KABUSA. :) JC
@EzeeLinux
13 жыл бұрын
@727JeffN Thank you! I agree it would be best to align before setting VTF but VTF is more important so it came first in the video... :) JC
@ianr2665
8 жыл бұрын
Excellent video thanks for posting
@noeljohnson868
10 жыл бұрын
Good work, feller. This helped a lot.
@charlesludwig9173
6 жыл бұрын
I have been told the Audio-Technica LP120 USB Turntable's stylus to headshell tail distance is 53mm, not 52, since the overhang is 16mm, not 15mm as is the Technics.
@brudy918
10 жыл бұрын
Thanks! Very clear instructions.
@ScottyD
10 жыл бұрын
Thanks... JC is awesome with Turntables!
@EzeeLinux
13 жыл бұрын
@SlimeAmTheBest Thanks! It depends on the cartridge. :) JC
@jcmolero71
11 жыл бұрын
That comes with the particular turntable model, specialy technics.
@The1970sInfatuate
13 жыл бұрын
@BadEditPro It's called the "Technics Overhang Gauge." I hope it will just be easy enough to measure 52mm with a set of calipers.
@FromMusicToMusic530
6 жыл бұрын
Ty for sharing
@chefjsut
8 жыл бұрын
thanks. allways learning!
@fernandomage
10 жыл бұрын
Perfect, thanks.
@ScottyD
10 жыл бұрын
You are very welcome!
@1DJLNR
8 жыл бұрын
Very true... good video.. I am a dj from the 80's and you talk all sense no filler..
@Threemicsrecords
13 жыл бұрын
My friend gave me some old Sonus phono cartridge (PME .5/LC) with Nude "Line Contact" Elliptical Diamond Stylus Configuration (Sounds like fun :D) and I have to say it sounds nice but IGD are pain in the neck even though I used protractor and other methods. Maybe th eproblem is that I'm using p-mount to 1/2 adapter.
@thehumkj
11 жыл бұрын
Great video - much obliged.
@roan46
11 жыл бұрын
Hi, thank you very much for the video. It's very clear and specific about how to setup a turnable. (by the way, what's the name of the tool that you using for the cartdrige's alignment. I don't have clear that point) I'll keep in mind your advices. Regards from Chile!!
@DaLilMobsta
8 жыл бұрын
Wish I watched this 5 minutes ago lol I just bounced my needle so many times trying to adjust it.... how do you know if it's messed up. this is My first TT ever
@GalaxieMarauder
12 жыл бұрын
great video.
@SDsailor7
11 жыл бұрын
Oh i did not know that, but i liked the video anyways and subbed to your channel. Thank you
@zookeeper2872
6 жыл бұрын
Cool turntable. How is the torque on that? Have you tried it for any type of DJing and queuing Beats? I'm just wondering how strong the motor is because that is exactly what I like doing and I sold my Technics a long time ago. I keep seeing all these really nice turntables like that one and I wonder if they can pull it off or not. I don't need amazing torque but just something with really good torque will do
@EzeeLinux
13 жыл бұрын
@vinyl12s Thanks Phil! :) JC
@EzeeLinux
13 жыл бұрын
@legOldtimer Thank You! :) JC
@The1970sInfatuate
13 жыл бұрын
Are you supposed to always set the anti-skate equal to the vertical tracking force?
@FUNKSTER67
11 жыл бұрын
Awesome mate ! Removalists dropped my TT and i was f----d ! Watched your video and " Joy and pain, like sunshine and rain "
@fidelios_frequency
13 жыл бұрын
Hey JC thanks for your videos. I have been trying to properly align my Shure M97XE on my Audio Technica LP 120 and I think I've got it right, now. However I still hear some scratchy "S" occasionally. I used the Shure protractor to align, but I was wondering if you happened to know the overhang in mm for my tomearm. I believe in one of your videos you mentioned to have both the AT LP 120 & the 97XE. Useful tips on optimizing the setup would be greatly appreciated. Thanks
@murfkensebben
11 жыл бұрын
I just got a Candle JS9163. It works great but it's playing the records a little too fast, so the sound/pitch is a little bit higher than it should be. How can this be fixed? Thanks!
@wardell1518
10 жыл бұрын
The commentator forgot to mention azimuth alignment, that is looking at the front of the pickup the stylus point must be normal to the surface of the record.
@phantasm1004
10 жыл бұрын
Agreed. However, the majority of turntables do not require user-adjustment of azimuth.
@bal2202
5 жыл бұрын
Hi I have a the same arm as the one in the video but for some reason it doesn't play to the end of the record. It stops about 1/2 inch from end of record and just repeats each line as it goes around and the arm won't move any further. Any ideas?
@rngl.r
13 жыл бұрын
@BadEditPro You're right, it is 49mm for the overhang. Quick question, I aligned my cartridge before setting the right tracking force, is that going to be a problem while playing records?
@timrichter2197
10 жыл бұрын
My turntable has a counterweight off the left side of the rear of the tonearm. What is that? (Anti-skate weight?) Sanyo TP 1010 is the deck
@paulpoco22
2 ай бұрын
I thought there was something wrong with my turn table today, a 1979 Sony PS-T20, lucky it is direct drive otherwise if belt that would not of lasted 45 years. Turned out to be a big dust bunny. It was sliding across the record at the start, LoL.
@mavil64
6 жыл бұрын
I put the anti skating on the same as the tracking force and the record would play reaaaaally bad then I set it to twice that much. Meaning 3 exactly. The max antiskating my turntable can go and it played fine.. sadly when I tested it on a record with the lower antiskating it scratched epitaph by king crimson... Just so people know be careful with antiskating it can ruin your day. test it on a record you do not care about first.
@wadepatton2433
8 жыл бұрын
Any help with the lateral or torque weight found on some Pioneers? I have a 530 I'm working on and I moved everything for cleaning.
@EzeeLinux
13 жыл бұрын
@clydesight Thank You! :) JC
@rngl.r
13 жыл бұрын
I have a question about aligning a cartridge. I have a Pioneer Pl-15DII and it has a lever that reads stylus position, and I believe is to align the cartridge. If I use the stylus position tool on the Pl-15DII to align a cartridge, can I use that already aligned cartridge on a Pioneer Pl-200?
@TheAnunnaki-NYC
11 жыл бұрын
WOW, I haven't seen a GLi SL-2500 in quite some time. Those tonearms are not the too good but they will get the job done. Great video indeed though.
@Heavenly.modified
10 жыл бұрын
thanks bro that helped me alot
@DooWops4Ever
10 жыл бұрын
What was the tool called that you put the Headshell in and aligned the stylus?
@marcbassili
7 жыл бұрын
Hello! i have a technical question (i have an mk5): when i put my tonearm in the middle of the plate to balance it, it stays in place. when i put the tonearm away from the center of the plate to balance it, it keeps on going back to its base, it doesn't stay in place! what does it mean? (the anti-skate is set to 0). Thank you
@EzeeLinux
13 жыл бұрын
@weasel2htm Thank You! :) JC
@scottyb4996
8 жыл бұрын
Excellent video. Your instructions were very clear and easy to understand.
@zeldahotterthenyou
11 жыл бұрын
What about for a mitsubishi DP-40? I just got it and it and it either plays records really fast or really slow...
@neilosadchy6265
6 жыл бұрын
thanks for this
@GudmundurThor96
12 жыл бұрын
i have an s-shaped tonearm on my kenwood kd-3070 turntable can i use the Technics Protactor?
@wesleyburks5368
4 ай бұрын
man, you were off on setting the counter weight to zero you had it at +2 and your tracking force was at 2.0 instead of 1.8! In order to properly set the anti-skate you either need a test record or an acrylic platter or something with no grooves. Setting it to the same as the tracking force is not always accurate. I've had instances where it was off by as much as 7 marks on the anti-skate dial!
@ObscureDisney
7 жыл бұрын
I have the Technics tool and I have an Audio-Technica ATLP120. I've tried aligning on the protractors and I can't get it right at all. So I decided to use the tool. I'm having just as much trouble. I'm trying to get the stylus to be right over that small triangle on the tool, but I can't really tell if it is. Also, according to the tool my cartridge is supposed to be turned in the opposite direction of the record.
@manFromPeterborough
5 жыл бұрын
I have set it to 52mm and turned cartridge inward slightly to line up with Ortofon protractor
@srercrcr
9 жыл бұрын
You left out the procedure for taping a penny to the top of the tone arm ;)
@ScottyD
12 жыл бұрын
@ZanzibarJose THANKS!!!
@DrCatalinIlie
8 жыл бұрын
thank you!
@ArshadHaroon
9 жыл бұрын
Hi Scotty, hope you can help me. I have a BSR 35CS Mcdonald record changer, everything works great except when I want to turn it off, and slide the slider to Auto so that it should turn off, the tonearm goes to the resting place and right away goes back to play the record. It does not go down upon the resting stand so that it should turn off. It use to work great but may be I touched some setting, please let me know how to do this. Thanks in advance.
@53pittmanjt
9 жыл бұрын
It sounds like one of the crossbeams has gone out askew on the treadle. I would reinstall all the drivers and then reboot.
@ArshadHaroon
9 жыл бұрын
Jeff Pittman What does that mean?, there is no software in such an old turntable,lol. I found it very funny, let me know what is going on.
@PanAmStyle
9 жыл бұрын
Arshad Haroon It means he was being a smart-arse because he had no idea. There is something missing, or broken, or mis-aligned under the chassis, probably a link or spring. Someone who is familiar with the mechanics of auto turntables would need to investigate and adjust or repair. At the same time they can make sure all the other adjustments are correct.
@moshezaharia4666
9 жыл бұрын
+Muhammad Arshad Qureshi It is only a matter of cleaning and lubricating the levers under the chassis, the ones that linked to the central cam gear.
@ArshadHaroon
9 жыл бұрын
Thanks for your comments Moshe, lol, but you replied after almost a year.
@philiplockett8056
9 жыл бұрын
hi, i have no scale on the counter weight so what do i do ?
@guitarylife3062
9 жыл бұрын
Philip Lockett same any advice?
@transsylvanian
6 жыл бұрын
Buy a digital scale for about 15 bucks showed in the video...
@tommywong2117
7 жыл бұрын
how much for that tools and what is call
@Billiards99
11 жыл бұрын
JC i need your help ty
@scudling
9 жыл бұрын
where does one get that plastic alignment tool?
@jeanlaquerre1328
6 жыл бұрын
This accessory was supplied by Technics with the turntable
@elvinlategan9857
7 жыл бұрын
The Stylis should be floating about a (1) millimeter above the record . then set your weight . Not just float around . Why be perfect on 1.8 if your arm is just floating and balancing like this guy says ?
@hawkfumodee5364
5 жыл бұрын
The spinning platter is trying to throw the arm off the record, wrong Scotty, the opposite is true.
@ultimatezegger0073
8 жыл бұрын
Well, this is too much for me. I did not understand it, but i hope i can get my Technics turntable set up.
@Appleloucious
7 жыл бұрын
You kidding, right?!
@Zestypanda
7 жыл бұрын
Just set it to 8 grams. You'll be ok. ;)
@EduardoMartinezedgy
4 жыл бұрын
When measuring for balance - you forgot to take the plastic stylus guard off. You whole job is NOW WRONG.
@Darksaige
13 жыл бұрын
I really feel like I just learned something
@SebisRandomTech
12 жыл бұрын
Why? Is it too complicated for you?
@Fluterra
8 жыл бұрын
BOTH points are critical for stylus alignment! Not just the inner one. What rubbish!!
@casperguylkn
8 жыл бұрын
+Fluterra That's not what he said, or meant. The INNER PART of the record if you had to choose, is more important to have as close to correct as you can get. Why? Because of Inner Groove Distortion. There is much more force in the inner grooves then the outer. That is all. If at all possible, try to get them both close, outside and in.
Пікірлер: 127