I hope you guys do some more of these talks and post them. Very insightful stuff that is inspiring and beneficial!
@leapnlarry
Жыл бұрын
“I can always go get another dead end job”, that says it all. “Why aren’t you doing this full time?” “Because im scared” love the honesty! “If i dont care about this product, It’s not going anywhere”. “There is a whole world of demons and insecurities buried down below you didnt know you had” Brene Brown would be proud of you! Thanks for sharing the conversation, i watched end to end. Larry
@sedled2829
2 жыл бұрын
"I can make that" the gift and curse of a maker
@lemonycactus8687
Жыл бұрын
I watched the whole thing start to finish. Super informative and inspiring. Hope to hear more talks like this with other entrepreneurs in the future!
@bamffatboi5526
Жыл бұрын
Finally, two dudes not selling snake oil. Just straight and solid business talk. Thanks.
@ritchie7575
2 жыл бұрын
Fire content. Really liking these 3D printing business podcasts.
@atapene
8 ай бұрын
First time seen your channel, from someone who has done it just take the leap mate you'll be fine, SO much better running yourself and you can always go back to working a 9 to 5 later as you say.
@CurtisCreations402
15 күн бұрын
Thank you both very much for taking the time to make this. This gave me a lot of insight being a family man as well and having that same intrusive thoughts of can I do this and provide for my family? You guys really nailed some of scary side of starting and trying to get a small business going. Again thank you for taking the time to do this great REAL information -CurtisCreations402
@EDITMODE
Жыл бұрын
20: GREAT question especially if your family member or even significant other/partner is not supportive or is narcissistic and doesn't want you to succeed. It definitely makes believing in yourself a LOT more difficult when those close to you don't believe in you.
@YoutubeHandlesSuckBalls
Жыл бұрын
Which marketing firm do you go with? The one with the best marketing, that made you notice them, of course.
@eugene3d875
Жыл бұрын
Awesome format, just like I had a beer with you, guys! Love your tips. As an ex-marketing and present seller, don't over think marketing. You don't need a fancy degree for that. Most of the fundamentals are in "marketing management" book by Philip Kotler. And marketing and sales, is one of these "swallow the frog" tasks
@asser83
8 ай бұрын
So good content. I'm a freelance developer, 40y, just bought a bambu P1P for fun/business. Business aspect is definetly there, this printer is good and I know cad and consulting.
@pjcanada4763
8 ай бұрын
Great info thank you , i do it for 10 years and did on and off buiz with it in small scale , now retired like to do more again . Great inpiration from your interview . I look forward to your next videos. 🙏🙏😊
@Flameimcarnete
2 жыл бұрын
hey guys, great stuff, trying to get started printing myself. any tips and tricks are always helpful
@rr_esthetics1
11 ай бұрын
Honestly, thank you for the HONEST video! Thumbs up from me!! We have this kind of business and it’s DEFINITELY not an overnight thing
@caneloANDRETTi
5 ай бұрын
Great interview, had a lot of good points throughout the whole interview. Im at the point that your mentioned, i am hung up on my logo so bad at the moment.
@EDITMODE
Жыл бұрын
super informative video and id wasn't boring or making me fall asleep at all. Even made me giggle at a few points for some of the relatable parts. would love to see more of these!
@iamtheprogression
Жыл бұрын
Great content. Thanks for being humble enough to bring in another top source of info both invaluable keep up the good work
@dzines65
Жыл бұрын
Have you had any issues with copyright? I see lots of Star Wars stuff. I know that Disney really monitors this diligently.
@antlu65
Жыл бұрын
Really appreciate you sharing this conversation!
@scratchinjack608
2 жыл бұрын
Good video! Taking the full time plunge, I would imagine would be a scary one.
@MartinsonManufacturing
2 жыл бұрын
He’s officially plunging this Friday!!
@outsidecounty9976
Жыл бұрын
@@MartinsonManufacturing how did it go it's been 6 months?
@BradKwfc
Жыл бұрын
I'm in the boat where I know my inventions can sell...but... do I want to be a manufacturer or an inventor?
@dkgoodrich8899
Жыл бұрын
Great podcast guys!
@futonmonkey82
Жыл бұрын
I sub to your both but just found this. OMG, you guys touched on everything I have been thinking about and going through. You guys should do this a couple times a year!!
@MartinsonManufacturing
Жыл бұрын
That’s awesome to hear. Thanks for the encouragement!
@fantikawerner8029
7 ай бұрын
So, Im a mental health professional and I think its quite obvious that your are struggling with your mental health. This video gives off the impression that your life is influenced by your fears and undesirable emotions. I dont know how it turned out since this is a whole year ago but damn, you need a psychotherapy like yesterday.
@metallicaandchimaira
2 жыл бұрын
I am designing a lamp that rotates with built in LEDs but dont know where to advertise it :(
@eds3dshop29
2 жыл бұрын
Really cool- thx a lot and all the best for you guys!👍😃 Ed
@MartinsonManufacturing
2 жыл бұрын
Thanks Ed. You too man!
@RippleofJoy
Жыл бұрын
Great trailer bro and intro!!
@mordecaimorales5055
2 жыл бұрын
Great video! Enjoyed every minute of it!
@wartable
2 жыл бұрын
You guys go to the same Supercuts?
@MartinsonManufacturing
2 жыл бұрын
It's actually SportClips, but yes.
@qc3dprinting
2 жыл бұрын
Great stuff guys!
@Richie_7777
5 ай бұрын
I’m starting a print farm using Bambu lab printers. X1C and P1S. In your experience, what’s your 3 top part failures. Thanks for the great content.
@jps99
Жыл бұрын
Thanks, learned a lot!
@manuel56354
Жыл бұрын
Super interesting interview!
@Padreto007
Жыл бұрын
What is the best software to produce those items. Blender or Fusion360 or..? What are your toughs.
@benjamindesjarlais2741
Жыл бұрын
What is a good software to make an STL file??
@czacaesar
Жыл бұрын
i just starting on Etsy but they ban me twice in just couple of months with no reason at all. at first they accept their mistake on banning me, then in just a month they ban me again! They didn't even bother to mail me what causing the ban. should i make a woocommerce shop or shopify? shopify is expensive :(
@MDFB985
Жыл бұрын
Hello Sir , how to start to sell your 3d printing service online as a student , what things shuold i pay attention to ?
@esurfrider7687
Жыл бұрын
Hey Martinson Manufacturing, what is that catchy intro music that you play in your videos? Where can I find it? Thanks!
@MartinsonManufacturing
Жыл бұрын
Great question! I’ve been trying to find it myself. I paid someone to make that intro for me and then they disappeared.
@vinnyisntgud7221
Жыл бұрын
Anthony has an uncanny resemblence to David Dobrik
@Baldavier
Жыл бұрын
44:48 marketing is important but dont get sucked into fake marketing schools that bind you to a contract or make you pay a fortune to attend events and seminars. Guy in his basement teaching what he learnt in the real world is fine; will take that over the self-hyped money grabbing schemes any day
Пікірлер: 50