Apparently, the key to this is the vacuum pulling the adhesive into and through the hole, filling it completely. I thought these spas/hot tubs were made of layered PVC so, I would have used PVC cleaner and glue. Damned glad I found this video. Thank you very much. Well done, sir. Well done.👍
@amyloves9940
7 жыл бұрын
I am so glad you posted this video of repair. I have this same spa and same issues. The spa received a seam pinhole last summer. I tried fixing it and was not having any luck. I gave up for a bit, but didn't want to throw it because it wasn't cheap and I always think there's a way to fix things, but I didn't have time with work. So, I put it off through the winter, even though I wish we could have used it then. It was difficult to work on with the weather. Now, that I came across your video, my number one mistake was not deflating it to fix it. I also did not use the 3M vinyl & leather outdoor glue for repair. I bought spa glue vinyl repair and that did not work either. I am so thankful I came across your video to try to continue to work on it, now that the weather is getting warmer and nicer. I hope it works on mine when I get a chance to fix it. :) Thank you so much for your post!
@Rakic_Aleksandar
8 жыл бұрын
Thanks man. With your idea i fixed a several holes in my intex PureSpa, an it is holding air for now. I tried several metods with patches and stuff but none of them worked. This yours is pure fisics. Thanks again. Hope it will work long time. Intead of 3M adhesive, i used BISON adhezive for vinyl and plastic. Tree layers an it is like new. Cheers!!!!!
@lukasbartos7072
8 жыл бұрын
good job man, I have the same spa with some air leaks somewhere, so now I know how to fix...
@otleybloke77
Жыл бұрын
Thanks for sharing! Got a few seam pin holes to deal with myself.
@kraazed1957
6 жыл бұрын
FYI, the Intex pump has a hole with a plastic cap on the back side at the bottom. You can insert the fill hose and use it to vacuum out the air from the spa.
@teresajones9734
3 жыл бұрын
Is air in the bottom of the liner normal? I have a bubble on the bottom of mine and I’m worried something is wrong. Do you know anything about this?
@marysammyboy
5 жыл бұрын
I did exactly as you did and it worked 😁 thank you so much for this video, I had tried everything beforehand to no avail.
@LanceOlenik
2 жыл бұрын
I appreciate you going through all that so I don't have to :)
@craigshea5341
7 жыл бұрын
thank you I was so upset that my intel spa had a couple of tiny pinhole leaks and it completely deflated and I just couldn't use it
@sirpablo199
6 жыл бұрын
Very good video. Thank you very much.
@nspgreen
7 жыл бұрын
How did you take apart the seal plug to access the flange and apply silicone sealant?
@jacobjohnson7297
9 жыл бұрын
Can you tell me where you purchased 3m vinyl adhesive and exact ne of product
@beerdrinkersunited7944
2 жыл бұрын
What type of vinyl cleaner did you use beforehand, did it also take off glue from patch?
@curtiskauffman
6 жыл бұрын
thank you for this video. I just got one on cl and am going to find the leak and 3m it
@davedixon6372
6 жыл бұрын
thank u so much for this it helped us alot but in the uk we cant get the 3m glue so i have used evo stik serious glue fix and repair adhesive and this worked on ours perfect
@tiggertar
5 жыл бұрын
dave dixon is this the stuff you used? EvoStik 663565 Serious Glue 33g Tube www.amazon.co.uk/dp/B000Y8GU66/ref=cm_sw_r_cp_apa_i_T36ECbVN80E3M And did you use it to stick a patch on or just on it's own to seal the hole? Is it still holding air? Thanks.
@lizstuart1888
4 жыл бұрын
thanx for the uk tip
@johnstockdale4002
5 жыл бұрын
Mark I have one that I need to fix same way. Could you please help me.... Is the vacuum pump just a regular air mattress pump???? I am looking forward to your reply so hopefully I can get mine fixed before Christmas. Mine is kept inside year round in my basement on 1 inch ridge pink foam to keep it properly supported extra insulation. Thanks very much and looking forward to your reply
@wadevid
4 жыл бұрын
would any adhesive work if you deflate then? i mean can you use the intex supplied patches just as effectively as the 3m if you deflate it while patching? Or are those adhesives and patches just that bad? It seems here that it's all about getting the adhesive to suck into the material vs finding the right adhesive.
@MsFreedom9
4 жыл бұрын
Mine began to loose air thru the top seam as well... Had it for only 2 days!
@williecook3412
2 жыл бұрын
Hi its water in losing filled up yesterday ,,turned on the heat and nothing this morning well maybe 6 inch any ideas ,thanks
@laurensimpers2752
Жыл бұрын
My spa has a leak around the air filter area. How can I fix that?
@suecrawford1971
7 жыл бұрын
I have had my Intex hot tub for going on the 3rd summer. When I set it up this year it started loosing water. Hook ups to the pump are good. When the water level reached 1" above the inlet for the water, it stopped leaking. I emptied all the water and have tried many water tests to no avail. What do u suggest? Sue
@agea7023
8 жыл бұрын
Thanks for the great video, Mark! I know it's going to help in repairing my spa. I was wondering, what is that attachment between your mattress air pump and the hose connected to your spa and where did you get it? Thanks for your help!
@SteveMack
7 жыл бұрын
So the bottom line is use 3M?
@laurensimpers2752
Жыл бұрын
My leg is around the airfield plug. How can I repair that
@Ankz247365
3 жыл бұрын
Hey Ive got a hot tub with a big whole one the seal is there any recommendid repair kits
@damianmartinez152
7 жыл бұрын
how long did it take you to find the small holes? Mine is losing air and I have been checking for a long time, everywhere I cannot locate the location where it is losing air.
@sharencooper367
3 жыл бұрын
Where can I get parts for this, name where you put the air in. I need that part
@viettran3529
6 жыл бұрын
Help. What silicone grease did you use around the air flange?
@imdeplorable2241
3 жыл бұрын
Some call it "plumber's grease" and you can buy a tube of it at Ace Hardware, Lowes, and Home Depot.
@MegaGuitarpicker
2 жыл бұрын
Shoe Goo fixed a 1/8” hole in mine. No patch needed.
@jcv3435
9 жыл бұрын
Ugh having an issue with air leaking on mine now.Can't find any holes though!
@jennifercrane4807
9 жыл бұрын
I have tried to repair a hole with a patch but air is still leaking out. How did you remove the patch?
@DwamitDave
9 жыл бұрын
is this still holding air . ???? i have a hole in my coleman lay-z-spa that you can poke a sharpie into on the outside of it
@OneLap996tt
9 жыл бұрын
PISSEDOFFATLIFE Yes, it's still holding air! I don't know if this fix will fill a hole that large, but it's still holding air
@DwamitDave
9 жыл бұрын
thanks for the response still it gives me hope on a diy fix.
@kyemcconnell5779
4 жыл бұрын
What mattress pump did you use
@chphilmajcher7718
4 ай бұрын
PLEASE NOTE: 3m 18061 .625 oz outdoor vinyl & leather adhesive is now OUT OF STOCK. I will try something else and post the results.
@rondie.x53
4 жыл бұрын
how did you seal the inside of the air valve?
@jamesgalloway5073
8 жыл бұрын
my tub is less the 45 days old and somewhere on the tub I am leaking water. the pump also leaked but was able to fix that any sugestions
@williammurray9460
7 жыл бұрын
Where can I buy the repair kit for the lazy spa
@vanoudxa
4 жыл бұрын
Hi, Does anyone confirm that this repair is durable over time? I am looking for the adhesive for sale on the net but I cannot find it. does anyone have a link? tks
@bigmazey
2 жыл бұрын
What is the name of the sealant used
@Diana-wg1tm
8 жыл бұрын
I have leaks in my hot tub just like you can you tell me where did you buy the 3M vinyl repair kit
@troyh589
7 жыл бұрын
You can buy it online but the stuff he used to around $240 - $260 for a small tube of it. Which I guess is cheaper than buying a new spa for each hole that happens. www.amazon.com/gp/offer-listing/B007XURZYY/ref=dp_olp_new_mbc?ie=UTF8&condition=new
@billionairemaker
9 жыл бұрын
Did you use the heater/pump to put air into it while everything was hooked up and you had it filled with water... Or did you use the mattress pump to inflate it when it was losing air? I think mine has a pinhole leak. I can't tell it if it is a pinhole leak or just the temperature swings (it has gotten very hot and then cold). It is marginally deflated after 5 days. I don't really know the best way to test for a leak either. Thoughts?
@JRob9923
2 жыл бұрын
What is the sealant?!?!
@michellesenter5088
2 жыл бұрын
I have a 20 inch cut in hot tub what can i get repair it
@ktoodle698
8 жыл бұрын
My inflatable hot tub is leaking water from the "A" hole, no pun intended. Its leaking where the unit connects to the air spout. The spout that blows in the air and cause the bubbles. I've tried waterproof adhesive, crazy glue with patches, no luck.Trying to put it on the inside and find the leak which is very difficult.If you know I can fix this, please help, my hot tub has been down for almost a month of trial and error on how to fix this. Thanks so much
@sacramentocityofblood933
6 жыл бұрын
You need a new rubber gasket. I'm searching for one right now, same issue.
@MrMendykahan
7 жыл бұрын
I got a tear on the floor, the soft material in the floor is soaking. not sure how to fix the
@velocity800
5 жыл бұрын
Bro!!! You need to peel the patches like a sticker !!!! Omg! You didnt know that?
@michellerussell4326
7 жыл бұрын
i had my hot tub up & running for 2weeks now been working fine never been it it for 2days went 2 go in it 2nite and at 1 part off the hot tub has inflated inwards so there no grooves in it its blown up in walls ??? whats hapoend we switched it off what is the problem
@craigmilne383
4 жыл бұрын
You think those holes in your tub might be something to do with your cat??
@qualityswisswatches1
8 жыл бұрын
like a bike innertube this can only be done properly while deflated and the air isnt finding an escape route weakening it while you apply the patch..
@judijackson845
8 жыл бұрын
I cannot remove the control unit from the wall of the spa....pushing on the button and lifting is not working. I have drained the tub
@tlcek2711
2 жыл бұрын
How do I find leaks
@ggoblue
5 жыл бұрын
i just put some goop on the hole, wet my finger, and smooth it down. no patch.
@adamberrisford7955
4 жыл бұрын
My mspa hot tub has gone faulty at 4pm Monday 13th I turned the heater & bubbles on &the pump it went bang and now the rcd breaker keeps tripping .
@cowlumbus
3 жыл бұрын
This is called a highjack. It's a useless question and comment to the OP content. Bug off and start your own thread!
@jimmyturner5438
7 ай бұрын
You go to all the effort of cleaning around your hole, then just before you stuck the patch on it, you rubbed your oily fingers all around the left hole. And that’s the hole that didn’t stick.
@riverfallshideaway
7 жыл бұрын
I looked up the product and found it was over $260 for less than an ounce. The spa cost a little over 400. Really surprised by the cost.
@cryptoidmonkey3985
5 жыл бұрын
I think you made a mistake with that price research
@genesmay6589
7 жыл бұрын
Says in my manual to use regular pvc glue from any hardware store.
@maxpoweramortecedores5693
9 ай бұрын
Meu esta vazamento água. Nao sei onde é
@TheNixbrix
5 жыл бұрын
how did you find holes?
@kbex1111
5 жыл бұрын
TheNixbrix put Dawn dish soap in a spray bottle, like maybe 2 parts Dawn, 8 parts water, spray it all over, voila!
@TheNixbrix
5 жыл бұрын
@@kbex1111 taaaaaaaaaaaax
@MrStuffforjohn
6 жыл бұрын
Well the hot tub is PVC not a vinyl.
@finleywallis4170
6 жыл бұрын
also get rid of the CAT!!!! its putting holes in your TUB lol
@AngelGonzalez-no7rg
Ай бұрын
The cat has a voice record in x3 speed
@jonbaker7237
8 жыл бұрын
why does my spa say E90 and beeps at me any ideas
@lukasbartos7072
8 жыл бұрын
clean the filter, it will work
@Roz3440
4 жыл бұрын
First time I heard the cat... 🤣
@jesseyHammond
7 жыл бұрын
i just bought is and already loosing air i payed over 800$ for this what is this did we all got screwed buying this, i emailed them,and no responce from them,i tried to bring it back from were i bought it and told me to deal with them if i wanted my money back they took all intex product off the shelf. lucky me dose any one want to buy a used spa that leaks a bit lol,jessey Eddy Hammond Gatineau qc
@chrisanthony8369
3 жыл бұрын
Bra thanks a lot driving me crazy lol
@luilifestyle1816
9 жыл бұрын
Did you ever think that the holes are being made by your CAT!?!? Obviously, thats whyit appeared a few times in the video.
@hotchalupa
8 жыл бұрын
my thoughts exactly regarding the cat!
@Sundance6758
8 жыл бұрын
+Louis Heinz I know my cat jumped up on the tub thinking the lid (I saw her) was on....almost went head first into the tub...she back tracked very quickly using EVERY claw she had...LOL She left one good sized claw hole & roughed up a few other areas....Moral of the story? Don't leave the lid off if you have a cat...she doesn't scratch the outside cuz I spray cat repellant but the lid acts like a HUGE heating pad for curious cats...Mine tub is indoors, by the way...researching how to fix the damn thing....
@StigFerrari
7 жыл бұрын
you wouldnt try to fix a bike puncture with the tire up - let all the pressure out first.
@markshenstone508
4 жыл бұрын
Had similar problem here in the Caribbean on a 4 year old intex tub . #1 Get rid of Cat ! #2 Get 3M Fast cure + tiny flat head screw through patch file off sharp screw head apply 5200 to screw attach.. Bingo ! ( cats claws are the cause ) .grrr
@custom285
6 жыл бұрын
The e 96 error code is the pink elephant in the room! Garbage tub! Look at Facebook page for intex
@cryptoidmonkey3985
5 жыл бұрын
E 96 error code used to be a problem for me - usually means there is air in the system or the pump is goin out. I never really have that problem anymore - I just always keep a spare pump and change the filters out regularly. I can swap out the pump in 10 minutes without having to drain the tub, and the cost of a spare pump, even if I have to replace it every year, is well worth it for me to have a year round hot tub. Comes out to $5 or $7 bucks a month - no biggie.
@hansmenesesoviedo
3 жыл бұрын
Jajajaj long story short jajaja
@claudehumblot2803
7 жыл бұрын
Très mal enregistré, on ne vois strictement rien....
@JeffLyons-r6m
10 ай бұрын
Looks like you made a mess and talk like you are guessing.
@markdavia8858
9 жыл бұрын
The patches peeled off with a little bit of acetone to loosen the adhesive. What I've found since I posted this video is that a thin layer of 3M Automotive Emblem Adhesive works extremely well with a small patch. My tub sprung another leak after sitting in the sun all day at 95 degrees. I used a small patch and the Emblem Adhesive over the leak when the tub was nearly deflated but still full of water. 24 hour cure and it's been fine since.
@juanvarela2244
6 жыл бұрын
Hello! Im writinig from Argentina, my english is not good, but I like to know the brand of the last glue that you use without patch right?, 3m vinil with patch leak? tks in advance.
@shawnmcbride4120
3 жыл бұрын
You never mention the last sealant that used on it
Пікірлер: 94