Very well explained. I just purchased the 550E. You taught me alot and I'm very grateful. Thank you so much!
@faviolamartinezsewdigitizing
Жыл бұрын
Glad you were helped by my video! Welcome to the Janome embroidery family!
@pattischolten7303
Жыл бұрын
I also just purchased my 550e. Thank you for creating this very well done lesson!
@faviolamartinezsewdigitizing
11 ай бұрын
You’re welcome, hopefully you now have a good understanding of it!
@marekimura2371
2 жыл бұрын
Thank you! So informative. I am getting back to my machine & I needed this so very much!
@faviolamartinezsewdigitizing
11 ай бұрын
So glad to hear that!
@karenglynn1011
11 ай бұрын
THANK YOU FOR CREATING THIS VIDEO!!! I have been struggling to use these options and your step by step instructions are perfect!
@faviolamartinezsewdigitizing
11 ай бұрын
I’m glad you found it helpful!
@faviolamartinezsewdigitizing
11 ай бұрын
I’m glad you found it helpful!
@loriholleman1817
Жыл бұрын
Thank you so much for all this information.
@faviolamartinezsewdigitizing
11 ай бұрын
You’re welcome!
@beesan7478
9 ай бұрын
i just got mine today.Thank you for the video well explained.
@faviolamartinezsewdigitizing
9 ай бұрын
I’m glad you watched the video, let me know if you need anything else explained!
@beesan7478
9 ай бұрын
@@faviolamartinezsewdigitizing Thank you
@beesan7478
9 ай бұрын
Hi@@faviolamartinezsewdigitizing ,I tried a small design and some alphabets from the machine. my bobbin thread is showing up.any idea whats wrong.i didnt change any settings.Thank you
@faviolamartinezsewdigitizing
9 ай бұрын
@@beesan7478 When embroidering lettering/alphabets/fonts you must embroider slow, the machine needs time for the stitches to form and when we sew too fast the bobbin will pull up. So, #1, so slow. #2 use a matching color bobbin wt thread to minimize any bobbin that might pull up. #3 lessen the upper tension (-) it. #4 make sure you use the tight tension bobbin case/yellow dot
@beesan7478
9 ай бұрын
@@faviolamartinezsewdigitizing Thank you. i tried with -5 tension it was some what ok.i didnt understand what you meant by tight tension bobbin case?is it ok to use spun polyester thread for bobbin.i used that.should i change the speed or default one is ok.Hope you can help.Thanks again.
@robtaft4798
Жыл бұрын
Great overview, thanks. Does this print out a worksheet listing colours, colour order, number of Stitches for each colour and total Stitches etc. My Singer produces a printable worksheet for each design.
@faviolamartinezsewdigitizing
Жыл бұрын
No, unfortunately this little program doesn't print a color stop design list. Janome used to sell a little program "Customizer" that did that, but when they began to really promote the digitizing programs (Digitizing Jr. Digitizer Pro, MBX, Artistic, etc) they also began to include these little programs as part of the embroidery machine purchase at no cost. In doing so they stripped some of the useful features in hopes that users would purchase digitizing software. (I've been told this by Janome tech support.)
@blhtml
2 жыл бұрын
Thanks for the video! so the thing you can do in the machine you can do on the PC I can't draw anything myself?
@faviolamartinezsewdigitizing
2 жыл бұрын
Yes that’s correct. Embroidery Editor is not a digitizing program.
@shermarsylvester9751
Жыл бұрын
I have the memory craft 500e the largest hoop is 7.9 x11 but it can only take 8 inches
@faviolamartinezsewdigitizing
Жыл бұрын
You need to select which hoop you’re going to use. Upper left corner of the toolbars.
@ladyono1274
2 жыл бұрын
Has there been any recent updates to Editor? All of a sudden mine is telling me “file not found” when I try to transfer a design to my 500e?
@faviolamartinezsewdigitizing
2 жыл бұрын
LadyO, I just looked at Janome Global and nothing is listed for an update. This is the link so that you can check periodically. www7.janome.co.jp/global/product/softwareapps/ Explain a little more about what is happening and maybe I can help you figure it out.
@sylviepaquet5029
11 ай бұрын
Hi , I have a MacBook Air and I’m unable to unlock the program. Any ideas on what to do . Thank you😊
@faviolamartinezsewdigitizing
11 ай бұрын
Unfortunately for you the program is only for a windows based computer. If your Mac has been divided you could try installing it on the other side. I’m not a Mac user so that’s all the advice I can give you, sorry.
Пікірлер: 28