I am glad Josh called me letting me knw about this. I was working on a TKO and this will save room on my Chevy II
@johnbehneman1546
11 ай бұрын
I LOVE IT!!!! TOTALLY AWESOME INNOVATION!!! YOU GUYS HAVE DONE YOUR HOMEWORK AND IT HAS PAID OFF BIG TIME!!!! I LOVE MANUAL TRANSMISSIONS!!!! YOU ARE IN CONTROL OF YOUR DRIVING EXPERIENCE!!!!
@Mcleod0000
3 жыл бұрын
It looks good . I been planning on getting the tko 600 , but will be happy to go with this one . I have a 3rd gen fbody
@justabystander3897
3 жыл бұрын
Man I was about 2 buy 2 TKO DAMMNN!!! Covid made me hold off on the builds so glad I did and I had to cut flloor tunnels OMG sshhh
@mikearmstrong7956
Жыл бұрын
Looks GREAT! Should Fit in my 99 Mustang GT No Problem!
@shawnrobin6822
3 жыл бұрын
Literally just bought a 5 speed kit from American Powertrain for my 1973 Camaro. Wish I was at least told to wait...
@AmericanPowertrain
3 жыл бұрын
Tremec made everyone keep it quiet. We didn’t even know the launch date till just a few weeks ago...Sorry
@stephenkowalski2448
3 жыл бұрын
Sounds great, looks like lower height vs the old TKO. Will this fit in a 67-70 mustang without having clearance issues like the TKO did?
@DAN007thefoxx1
3 жыл бұрын
It can apparently fit in a 66 without any floor cutting. Which is impressive to say the least.
@michaelmason8620
3 жыл бұрын
Well I pulled the trigger and bought a tkx 5 speed for my mustang ! Hopefully it is everything they say it is
@JohnnyRebKy
2 жыл бұрын
How much did it cost ?
@johnbehneman1546
11 ай бұрын
SUGGESTION: HOT ROD MAGAZINE!!!
@Thegaragefiles
3 жыл бұрын
I wish I would of waited one more month I didn’t know a new one was coming out, I just installed my tko and waiting for the driveline. Oh well
@mattinclemson
3 жыл бұрын
Yeah same here. Bought mine in July and ended up having to cut my entire tunnel out because the TKO-600 was too big.
@Thegaragefiles
3 жыл бұрын
@@mattinclemson what are you putting it in?
@AmericanPowertrain
3 жыл бұрын
Tremec had to keep it under wraps. Nobody could talk about it.. Sorry!
@mattinclemson
3 жыл бұрын
@@Thegaragefiles @Thegaragefiles It was just a base '70 Chevelle. (I mean 100% completely stock) Auto on the column. Sales rep said it would fit fine, but to get it high enough to get the drive line angle right with even just a stock rear-end meant the tunnel had to come out. The big bummer is it's an all original sheet metal car and the last thing I wanted to do was cut it up...then find out there's one a couple months later that may have saved me from doing that is what's the most frustrating. Oh well.
@monstergreen6728
3 жыл бұрын
Let me know if you installed the TKO and what the shifting is like? I put one in my 67 mustang and I feel the shifting is notchy? Now I only have about 400 miles on it and have not yet changed the oil so maybe that has something to do with it but was wondering about your thoughts on this and if you have the same issue? It shifts but just notchy??
@DAN007thefoxx1
3 жыл бұрын
May consider this in the future. Wonder how compatible it would be with import engines such as the B58, RB26, 2JZ, etc.
@kenbrown8186
3 жыл бұрын
Does it require a new bell? I hate my tko600 but I am squared away with a nice hydraulic clutch setup that mounts to the tko bosses
@AmericanPowertrain
3 жыл бұрын
It’s bolts up just like a TKO crossmember too
@ianberry5879
3 жыл бұрын
I am very interested in ordering one of these after the C3 Corvette version with the offset shifter after it's released. Can you tell me what I will need for any rear crossmember modifications or bracket adapters? My 80 4 speed C3 does not have the bolt in crossmember, it's solid all way across.
@jasonwhitfield4876
3 жыл бұрын
Will this be a direct fit to a 460 bbf?
@VinnyMartello
3 жыл бұрын
I was really close to buying a Tremec. But they told me it couldnt handle pulling a trailer.
@biff1212
3 жыл бұрын
Will this fit a 2nd gen firebird without modifying the tunnel? I'm interested in swapping my ST-10 for this behind my Pontiac 400
@josephhaddakin8510
Жыл бұрын
does tremec make transmissions for Toyota pickups
@chrisheyer1
2 жыл бұрын
Could i squeeze one of those in a 65 fairlane500?
@robroderick2193
3 жыл бұрын
I was very interested until I saw the lack of a torque arm mount . I have a C4 corvette . Was going to move up from a 3550
@AmericanPowertrain
3 жыл бұрын
@Ragingbull340 nope. TKX is now front load design. TKO is top load. A totally new transmission end to end
@AmericanPowertrain
3 жыл бұрын
There will crossmembers coming out that have the torque arm mount. Don’t worry
@Mcleod0000
3 жыл бұрын
@@AmericanPowertrain Awesome
@JohnnyRebKy
2 жыл бұрын
How much do they cost ? Nobody ever says 🤷♂️. I got a Chevy K10 4x4 I want a 5 speed in
@AmericanPowertrain
2 жыл бұрын
It's all on our website. $2795 and this trans is only designed for 2wd applications.
@spicymiataguy9115
3 жыл бұрын
I need something that holds power and uses the 1.6 Miata bolt pattern without using an adapter plate
@AmericanPowertrain
3 жыл бұрын
Good luck
@jacobnicoletti1235
3 жыл бұрын
Do these transmissions work for light towing? I’d be switching over from a 350 SBC/SM465 4 speed combo. My next motor will either be a built 355/383.
@AmericanPowertrain
3 жыл бұрын
Not really designed for that
@jacobnicoletti1235
3 жыл бұрын
But can it handle it? I imagine if it can handle horsepower and torque that it could handle a little towing here or there. I don’t tow all the time but if I were to tow a little trailer or a load of scrap to the junkyard I’d like to have the peace of mind that the trans wouldn’t fail.
@carpartrelapse5057
2 жыл бұрын
Ummmm so when is it going to be available?
@AmericanPowertrain
2 жыл бұрын
They have been off and on since Jan. We have stock from time to time but they sell out quick. Just call us at 931-646-4836
@dookiehowser1162
8 ай бұрын
anyone know if this can be put in a 1975 FORD Hi-boy pickup, 460, 4x4? I thin it has a T-18/19, not sure, in there now. Want something that I can be able to drive it on the highway and lower the RPM's. Any advice appreciated. TY
@ThanasisGR
3 жыл бұрын
Ηi,this gearbox is it good for quick gear changes at high revs about 7500-8000? thx
@DeathByLego
3 жыл бұрын
It says yes, I just saw another channel and they said they’ve successfully tested to 5500 with no problems.
@ThanasisGR
3 жыл бұрын
@@DeathByLego The point is about 7500-8000!
@DeathByLego
3 жыл бұрын
@@ThanasisGR I was just telling you what they’ve already tested too dude
@ThanasisGR
3 жыл бұрын
@@DeathByLego I have seen that reply, thanks
@davidhebert6678
3 жыл бұрын
I wish I’d have waited 3 months to buy my TKO600, I could have had the new model. Its still sitting in the box...
@davidhebert6678
2 жыл бұрын
@Dennis Teixeira TKO600
@grizzlygamingGG
4 ай бұрын
Cant want to install mine in my 67 c10
@rudyyarbrough5122
3 жыл бұрын
Will it fit a 64 Corvette without floor or chassis mods?
@jaivette
3 жыл бұрын
I have a tko600 installed in a 64 coupe behind a Ls. No fit problems with floor. I do however have a removable crossmember. Since tkx is smaller better fit👍
@shitbox7413
3 жыл бұрын
Is 5th an overdrive or 1:1?
@shitbox7413
3 жыл бұрын
@Ragingbull340, Awesome! 👍🏻
@bigalexfalls
3 жыл бұрын
What's it going to cost for just the trans
@AmericanPowertrain
3 жыл бұрын
$2795
@PeterHatch-mx7zc
11 ай бұрын
What is the cost
@AmericanPowertrain
11 ай бұрын
$2895
@jesco6830
3 жыл бұрын
How is the shifting compared to the tko600. Smoother?
@AmericanPowertrain
3 жыл бұрын
Yes
@jesco6830
3 жыл бұрын
@Ragingbull340 hopefully this is the case. We’d be saving ourselves money by going this route and not having to by a hydraulic clutch system. If it shifts smooth like a t56 I’m all in. Set me up for a 72 Mach 1
@jesco6830
3 жыл бұрын
@Ragingbull340 does the hydraulic clutch feel better? Better engagement? Someone told me they were coming out with this one 4 months ago..so I waited! Glad I did too man
@DeathByLego
3 жыл бұрын
@@jesco6830 hydraulic is way better! Smoother, lighter, better for cold winters.
@jesco6830
3 жыл бұрын
@@DeathByLego at this point I think ima go with a t56 magnum for the 6th gear OD
@wht240sxka
2 жыл бұрын
Sounds wonderful, but I have a feeling it’s worth more than my car is. So as much as I want it, it’s not looking very practical...
@twowheeldisco
3 жыл бұрын
Looks bigger and heavier
@AmericanPowertrain
3 жыл бұрын
Its not
@DeathByLego
3 жыл бұрын
It’s smaller and lighter. It weighs 96 pounds I think dry.
@russellvinson1386
11 ай бұрын
Are the dimensions the same as a stock T56? As in tailshaft length etc
Пікірлер: 74