Nice one Harvey, I appreciate your daydreaming skills. ✌ 🇦🇺
@carlmace5633
4 ай бұрын
I can’t wait to see the start of the build.
@paulbrodie
4 ай бұрын
Yes, we will start by building that Big Fat U-brake.. I'm excited too!
@zachb.6179
4 ай бұрын
So excited for this build :-) Thanks to Harvey for the story behind that wild seatpost
@paulbrodie
4 ай бұрын
Thanks Zack. We will keep you up to date with the build...
@jimnielsen8030
4 ай бұрын
AWESOME! a great story(stories) about the woznot and harvey's seat design(the 'sitnot'?). both are examples of cool innovations and experimentation going on in the vancouver area during the 'golden age' of mountain biking. i was extremely fortunate to acquire one of harvey's saddle-posts from the late, great pippin osbourne, years ago. i didn't even measure it to see if it could go on one of my brodies or if i have to get a fat chance to slide it in!? i look forward to watching this series!
@paulbrodie
4 ай бұрын
Thanks Jim. Enjoy your Comments!
@davidvalletta2755
4 ай бұрын
I like Harvey. Character. I assume you’ll still go 26”? It won’t be a 29er? Only the 1-1/8” head tube update? Stem still a quill?
@paulbrodie
4 ай бұрын
Harvey is a bit like a Mad Scientist, but in the very best way. Yes, 26", quill stem, basically only changing the head tube size. Thanks for watching!
@retromechanicalengineer
4 ай бұрын
That was great Paul. I'm not much of a bicycle guy but I love the innovation. Harvey is a very charismatic and interesting fellow, it was a pleasure to watch him explain his concepts. Best wishes, Dean.
@murdoc6501
4 ай бұрын
Great story and engineering! Looking forward to the build! Go Paul and Mitch, keep sharing and moving forward!
@paulbrodie
4 ай бұрын
Thank you very much! All the Best...
@-MacCat-
4 ай бұрын
Woohoo! A new project ..... 🍿😃
@paulbrodie
4 ай бұрын
Yes, nothing like A New Project!
@lesterverne3454
4 ай бұрын
Harvey is great and amusing storyteller! Woznot alive👍
@randyhale4181
4 ай бұрын
What a great story and what a great name for a bike.
@paulbrodie
4 ай бұрын
Thanks Randy :)
@Hertog_von_Berkshire
4 ай бұрын
Looking forward to seeing the Woznot II come together.
@danonanisland
4 ай бұрын
I’m an old shore boy and Harvey and I attended UBC together. I rode past Harvey’s place on my way to school everyday and some days he would join me for the ride in. At that time Harvey, and I believe you were experimenting with an S shaped carbon fibre suspension seat post. Did any of those bikes survive? Thanks for the content and the memories and please invite Harvey to reach out to me. Cheers
@paulbrodie
4 ай бұрын
Hi Dan, I think you are referring to the Allsop Soft-Ride carbon beam which had the seat mounted on top. They were very Hot for couple of years, and then everyone stopped using them... I did talk to Harvey and mentioned you, but that was many years ago, and his memory might be fading like mine is sometimes. Send me an email and I will pass along his contact info... Thanks for commenting..
@francissobotka8725
3 ай бұрын
The compost reminds me of the pivotal seat post system designed by Macneil bmx out of Canada .
@paulbrodie
3 ай бұрын
You might be right.. I was never into BMX...
@1mp0r7g4m3r
4 ай бұрын
Love those brakes! Please please do a video on your shaft-drive bike in the background, as well!
@TL243
4 ай бұрын
Awesome!!
@ccbproductsmulti-bendaustr3200
4 ай бұрын
Looks like another awesome project coming up 👏👌 Cheers Chris
@KevinSmith-vv8uw
4 ай бұрын
Harvey, I like your jacket.
@hansfrick1717
3 ай бұрын
What a beautiful bike if it wasn't for the de components or things like quill stem I would have never thought that this was a over 30 year old bike.ore
@paulbrodie
3 ай бұрын
Thank you Hans!
@bake162
4 ай бұрын
If the museum is not displaying the bike why would they need it back?
@paulbrodie
4 ай бұрын
Well, apparently the bike has been on display since 2016, coincidently the same year I just happened to "drop by..." One viewer said it is on display, but hanging up very high, and hard to see. I hope, when it is returned, it gets a much more prominent display position...
@korversniels3553
4 ай бұрын
Also because museums are not just about "displaying things" but also being "archives" of what exist. Most of the time, what you see in a museum is just the surface part of the iceberg. For exemple the Louvre museum has 36000 items on display, and a collection of 500 000+ items
@Dr650rob
4 ай бұрын
He was ahead of his time with the composite
@TheUncleRuckus
4 ай бұрын
Those seat posts are really cool looking, shame they didn't take off they look like they'd be super comfortable and have some compliance when going over bumpy terrain. Great video as always fella, really excited for this build. 👍👍
@robertpatrick3350
4 ай бұрын
I had a Brodie fork bridge on my rockshox Mag20’s with a matching booster and mavic cantilevers
@paulbrodie
4 ай бұрын
Robert, we called them Rock Roosters back in the day...
@keirfarnum6811
4 ай бұрын
Those original Rockshox fork bridges were FLIMSY! I changed mine out on the Mag21s and it seriously improved the fork.
@paulbrodie
4 ай бұрын
Early days and the manufacturers were learning. We sold a lot of our Rock Roosters...
@jankomaras
4 ай бұрын
Legends ❤
@paulbrodie
4 ай бұрын
I think that means we're old, right? ...
@jankomaras
4 ай бұрын
Not at all, I think you’re timeless!
@paulbrodie
4 ай бұрын
Great reply... Thank you!
@_xnk7257
4 ай бұрын
Do you have any videos on the channel documenting building aluminum frames?
@paulbrodie
4 ай бұрын
Not yet... we will be filming how the Woznot gets made though...
@freddyatlarge
4 ай бұрын
Is that a bcd buffalo composite design carbon post?
@kepamurray1845
4 ай бұрын
I reckon you should do a modern take on it with 29" wheels.
@felicetanka
4 ай бұрын
U brakes are the strongest as your brake bosses attest.
@michaelbonade4667
4 ай бұрын
Oh the details...God help a bike nut
@medievilassassin
4 ай бұрын
I thought the seat post was wood 😂
@paulbrodie
4 ай бұрын
Apparently not...
@splashpit
4 ай бұрын
I don’t know who you are you’re video just showed up on my feed , I’m Australian and like watching old bike stuff as I’m 56 and still ride 500k weekly to go to work , my takeaway from this is that you had a bike “ gates drive “ ready 30 years before its conception. I need to research your bikes now as that red maroon bike in the foreground looks very similar to the Malvern star bikes sold in my home city as a kid.
@paulbrodie
4 ай бұрын
Thanks for finding our channel. We do have a Lot of old motorcycle content, and bicycles too.. I have never had a Gates Drive on any two wheeled vehicle, so I'm not quite sure what you were inferring? Anyway, Greetings to Australia....
@splashpit
4 ай бұрын
@@paulbrodie gates drive is a belt drive opposed to a chain which has a link so you’re frame build here could easily accommodate, I have two gates drive bikes and they have a section of the rear stays that seperate for replacement anyway seems like you have moved on or stayed behind and take no interest in bike industry innovations and I’m jealous as all they seem to do now is find solutions for problems we never had.
@paulbrodie
4 ай бұрын
I know exactly what a Gates Drive is. I taught Framebuilding 101 for almost a decade and helped several students build frames that incorporated a Gates Drive System. To say that I take no interest in bike industry innovations is completely wrong.. Have a nice day...
@lancekincaid5610
4 ай бұрын
I enjoy your videos so much, I got done with the 1st six rounds of Chemo. I start the 2nd round in July good news though, I won't loose my hair (past my shoulders& beard to the middle of my chest) WOO HOO 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
@davidmarsden7103
4 ай бұрын
Amazing machine. If you’re making new brakes, why not do a run of 20 sets? I can easily see people paying a few hundred dollars for a set
@glen3509
4 ай бұрын
Paul, is The WOZNOT chromoly or Titanium?
@paulbrodie
4 ай бұрын
Glen, The WOZNOT is 6061 aluminum and 4130 steel...
@Billy-burner
4 ай бұрын
Grease nipples on brakes on a bicycle.. what is your reasoning for this?
@xpndblhero5170
4 ай бұрын
Those front brakes look like BMX brakes and I love it.... Thats probably my BMX background being biased but still, they look amazing. 😁👍❤️
@slimdog72
4 ай бұрын
Thanks gentlemen. Stoked to see we are getting more framing building content.
@paulbrodie
4 ай бұрын
Thank you. Yes, looking forward to creating Woznot Number Two...
@minnionator
4 ай бұрын
Compost...Woznot...man I love good punns. Keep up the good work Paul!
@paulbrodie
4 ай бұрын
Thanks Jeff. Yes, I love Good Names too!
@marlonterbio
4 ай бұрын
wow.. another quality video! nice work mitch!
@davorinrusevljan6440
3 ай бұрын
My kind regards to both of you gentleman! Pass them to Harvey please!
@paulbrodie
3 ай бұрын
Davorin, all three of us thank you very much!
@tomthompson7400
4 ай бұрын
Ah ,, a woz not lol some really great details on that fine cycle , it just looks so engineered. And Harvey seems like a really nice guy.
@paulbrodie
4 ай бұрын
Thanks Tom. Yes, that video all came together very nicely!
@BigTunaAK
4 ай бұрын
Harvey is awesome !
@johnnysaudade773
4 ай бұрын
I never remember Bontrager forks having rake in the blades. As a matter of fact I remember reading a whole dissertation written by Keith as to why putting the rake in the crown was superior. NVM I stand corrected. I had no idea he ever produced a switchblade with rake in the legs, judging by the photos they look early.
@paulbrodie
4 ай бұрын
I had a pair of Bontrager forks. There was no rake in the crown, just the fork blades...
@galenkehler
4 ай бұрын
Woznot to love about this bike?
@paulbrodie
4 ай бұрын
Hey, I like that comment!
@mortenrosentjorn1803
4 ай бұрын
Enjoy this so much! Thanks❤
@StereoDiscoShit
3 ай бұрын
Always love seeing the design journeys through rough prototypes to final iteration! Thanks for sharing the stories!
@paulbrodie
3 ай бұрын
Thank you very much!
@markzurowski3627
4 ай бұрын
This will be awesome to watch...
@MrMCTario
4 ай бұрын
Bro just handed you the keys to mtb history because youre brodie. Here are two seatposts no one can buy. Holy crap!
@markmclellon8516
4 ай бұрын
How about 3D printing the unique shape of the seat/post? Possibly carbon fiber nylon?
@paulbrodie
4 ай бұрын
Yes, someone could do that.. I do not have a 3D printer..
@sarkisbenliyan1180
4 ай бұрын
Hi Mr. Brodie, As an enthusiast of mountain bikes since the 80s, I have always been a fan of experimental and maybe odd bikes. You already mentioned the Cunningham Mantis, and there is the Yeti C26, the Specialized Epic Ultimate (although that is a later one), and the composite forks by both Bontrager, Pace, and yours (Brodie). I am so happy to learn of the existence of the Woznot and your plan to replicate it. Amazing. I am really looking forward to this build and found the introduction of your frame and the chat with your funny friend Harvey a premise to the start of a fun couple of episodes. (Compost 😂.... They are now). Best regards from Germany, Sarkis
@paulbrodie
4 ай бұрын
Thank you Sarkis, for watching and commenting. Greetings to Germany!
@sarkisbenliyan1180
4 ай бұрын
@@paulbrodie I don't know that red head emoticon, but maybe you can explain. Please send my regards to Mitch: nice work at the camera and fab editing. 👍🏽
@patreilly4293
4 ай бұрын
Interesting bike. Another great video. Thanks.
@paulbrodie
4 ай бұрын
Thanks 👍 Pat. Glad you enjoyed it..
@ellerybice3787
4 ай бұрын
🚴🏼🚴🏼🚴🏼🫡
@thomasstone1363
4 ай бұрын
Can't wait to see this come together!
@davidwalters4014
4 ай бұрын
As always, enjoy every episode! This build is very interesting! Have had ideas of this in my head, but an entangled frame crossing over itself! Maybe even changing the diameters (stepping up and down) of tubing throughout! Continued success!
@michaelbrinks8089
4 ай бұрын
6:48 The bolt in rear frame is a great idea 💡
@paulbrodie
4 ай бұрын
It is unique, thank you...
@MudmanDH
4 ай бұрын
Amazing bike, amazing brakes and seatpost. Pure gold of MTB history.
@paulbrodie
4 ай бұрын
Thank you very much...
@peglor
4 ай бұрын
The computer game Spacequest 6 also had ComPosts but they were used for communications on board the Deepship 86, which was definitely not a parody of Star Trek 🙂.
@Metal-Possum
4 ай бұрын
Why stop at 1 1/8" when you could use a 1 1/4" "Evolution" headset instead. :D
@paulbrodie
4 ай бұрын
Gary Fisher pushed very hard to get the Bicycle World to accept his Evolution Headsets.... But they never took off. For me 1 1/8" is just fine.
@Metal-Possum
4 ай бұрын
@@paulbrodie That he did, spare parts are tricky these days... The industry tried 1.5" over a decade later, only the bottom half of that caught on... My 1930's tandem is 1 1/8" threaded, with a "headclip" style headset and no expander/wedge on the stem. Spare parts are a nightmare to find.
@hansstoops
4 ай бұрын
On my way to the IMBA Europe Summit last week spied a Brodie parked outside the train station in Innsbruck...
@goodwaterhikes
4 ай бұрын
😎✌
@Surestick88
4 ай бұрын
That seatpost would probably do well with an aluminium insert to take compression loads and some FEA on the underseat section to refine the design.
@TorteTS
4 ай бұрын
Yes, but you will lost the lightweight, a little…
@JB-hv7ps
4 ай бұрын
The cantllever in the background looks interesting.
@paulbrodie
4 ай бұрын
Someone else talked about a cantilever frame in the background... I have no idea what that is...
@JB-hv7ps
3 ай бұрын
When I got into old cruisers that style of frame was/is called a canti/cantilever. I thought this bike was a work in progress,not seeing a drivetrain.Very cool what you did with the donor bike shaft drive. That being said,the woznot project is shaping up to be a great one.
@edgarpoe517
3 ай бұрын
I shouldn't watch porn like this in the morning.😀 So cool! Steel is real.
@paulbrodie
3 ай бұрын
Well that is quite a comment!! Thanks for watching...
@edgarpoe517
3 ай бұрын
@@paulbrodie Mr. Brodie, I am a huge fan.😀
@slicedbread9003
4 ай бұрын
Absolutely cool bike. Innovative. After the explanation, it is easy to see how you went from the Gator fork to the Waznot rear triangle. I really like the look. And the paint and decal color goes well with the bike. I'm looking forward to watching this build. In the background is a Paul Brodie cantilever frame. It may not have the innovation of the Waznot, what is the story on that?
@paulbrodie
4 ай бұрын
Thank you. I'm not sure what you mean by the "cantilever frame"? Are you talking about the burgundy and cream shaft drive bicycle?
@slicedbread9003
4 ай бұрын
@@paulbrodie Oh, I didn't catch that. Of course it would be special in some way. It looked great in the background.
@paulbrodie
4 ай бұрын
Thank you. There will be a little more detail on that bike next video....
@erronius1
4 ай бұрын
love this channel! subbed !
@paulbrodie
4 ай бұрын
Thank you!
@sebastian_schanz
4 ай бұрын
Great video. Harveys fibre composts are truely inspiring. I will attempt to repair 13 year old Zipp carbon cranks with epoxy and a vaccum chamber next week - would be handy to have a composite master like Harvey advising. Thanks for entertaining us with mountainbike history once again - looking very forward to the WILLBEE bike! Greetings from Berlin Sebastian
@joell439
4 ай бұрын
👍👍👍👍👍👍
@gravely1000
4 ай бұрын
I have limited interest in cycles and cycling but y'all are incredible fabricators. Can't put a limit on making things and making things happen! Keep up the GREAT work!!!
@amc_sounds
3 ай бұрын
This was my fav bike that I saw at the Marin bicycling museum back in 2017. It was kinda tucked at the back, near the top back left on the main wall, and Mr Breeze kindly gave me low-down. That was a pretty good day!
@bbarber6845
4 ай бұрын
Love this! Thanks for Harvey as well. Loved the spirit way back of trying things and working with good people to make out toys more fun
@michaelbrinks8089
4 ай бұрын
I wish someone made a strong, steel, reinforced, full suspension frame that could be used for motorized bicycles. With the shock mounted in the rear behind the seat instead of inside the frame, causing the engine not to fit in the frame. If someone made a full suspension motorized bike frame. Similar to those felt faker frames that have a gas tank in the top tube. They could probably sell a ton of them.
@robertpatrick3350
4 ай бұрын
Not quite what you’re asking for however…. The Cotic Rocket would tick most of those boxes…. If you look at their site they have an e-bike prototype
@pirminkogleck4056
4 ай бұрын
i had once a trek 800 singletrail, with Magura HS33 (neon Yellow ) and a full shimano top gear ) . allthough it was a 90s era bike, i liked it over all my other bikes. the smaller wheels and overall light weight , oh boy i loved it ! it was stolen by a drug dealers customer from next door. so sad !
@weedmanwestvancouverbc9266
4 ай бұрын
If you're adding you brakes to it for extra stopping power, I've got a set of vintage and in very good shape Scott Peterson self-energizing U brakes, so I took off my tandem when I got Chris DeKerf to put disc brake bosses on
@justfunk88
4 ай бұрын
Harvey have a bright mind and straight hands
@lirumlarum7797
4 ай бұрын
very interesting in tech, the personality of this creatiors is also impressive.......nice guys
@tomtruesdale6901
4 ай бұрын
Looks like Harvey put his heart and soul into making those seats only to see his dreams dashed on the rocks of the legal system. I wish him well in whatever he is doing now. I am sure you will honor him when you build the new bike. The Woznot part Deaux rides again.
@c3N3q
4 ай бұрын
I bet those guys won't be able to tell that the bike they'll be getting back is actually the replica😎 but serves them well, because obviously NOW they really want the bike!!! After they had it in the attick collecting dust 😖
@ThomasDiFrancesco-Schäfer
4 ай бұрын
Waitng for the WOZTWO....quill stem, gatorblade, handmade brakes....all that beautifull parts from the past.
@paulbrodie
4 ай бұрын
You and me both!
@bcr1973.
4 ай бұрын
Wow this will be great! Surely though you would send the replica to the museum!? Maybe change the stem but keep your history..
@martinjfabbro
4 ай бұрын
Love the bike ❤, but I think a Brodie engineered type seatpost would suit the bike much better. That one looks made out of wood.
@sidecarbod1441
4 ай бұрын
12:25 Was this recorded before the Titan 'toilet roll' imploded? (Not sure that it was in the best 'taste' mention that disaster of a sub waiting to happen)
@thinkpadBentnoseTheBlind
4 ай бұрын
I am a heterosexual man but just totally fell in love with you Paul. Thank you for this video.
@craigkeller
Ай бұрын
All that brilliance in one room. Thanks everyone !
@eos777
4 ай бұрын
Nice!
@1crazypj
4 ай бұрын
I though you were going to say, it was so much work to build, it woznot a good idea for production 😁
@oreocarlton3343
4 ай бұрын
Are there any advantages of a straight blade fork other than aesthetics (or ease of manufacturing)? Curved rigid forks feel way more compliant
@paulbrodie
4 ай бұрын
It all depends on the wall thickness of the straight tubing.. We had Tange make us custom fork legs: 1.1mm wall thickness on top tapering to 0.7mm at the bottom. Gatorblade was a great fork. I know I am biased :)
@oreocarlton3343
4 ай бұрын
@@paulbrodie if the wall thickness and tapering is equal , what would be the performance advantages of each design - curved VS straight?
@weedmanwestvancouverbc9266
4 ай бұрын
I had a Rocky Mountain Stratos in the day with came with a Tange Big Fork that I replaced with a second hand Synchros fork. I remember feeling a lot more confident about my ability to dice around on the trail with the straight fork. But my arms and wrists ended up hurting afterwards
@paulbrodie
4 ай бұрын
I think it's subjective vs. scientific. The tapered and curved blade is never going to have the same wall thickness as the straight un-tapered blade. Some riders will like the former, and some will prefer the latter. That's the best I can do to answer your question...
@miguelaguirre1253
4 ай бұрын
Great story! I love those brakes! Would love one of these
@weedmanwestvancouverbc9266
4 ай бұрын
Frames or parts breaking never stopped Brent Trimble.
@shovelresearch
4 ай бұрын
can't wait to see this bike in person!
@herosam1000
4 ай бұрын
That guy has to be one of the first people doing resin infusion?
@robertochiaratti1380
4 ай бұрын
👌👌👌
@keirfarnum6811
4 ай бұрын
If I hadn’t ridden a Fat Chance Yo Eddy (29.4 mm seat post BTW😁) back in the 90s, Brodie probably would have been my second choice. Great bikes.
@paulbrodie
4 ай бұрын
Thank you :)
@quesoner34
4 ай бұрын
That was so wholesome, loved to see that. ❤
@ChrisFreeman-e3i
4 ай бұрын
This will be fun!
@LightBranches
4 ай бұрын
This build is going to be epic! And that seatpost is a masterpiece...almost organic.
@paulbrodie
4 ай бұрын
Thank you. It was good to have Harvey as a guest, and he certainly did create a beautiful Seatpost..
@BeLoveHaveFun
4 ай бұрын
Production standards on this channel just keep improving.... Mitch is earning his small fortune. On ya Mitch! I was a Gatorblade fork owner in the late eighties, it was the first fork I didn't bend.
@keirfarnum6811
4 ай бұрын
Makes me wonder if these straight blade forks were the inspiration for the steel welded straight blade fork that originally came on my Fat Yo Eddy that Chris Chance came up with.
@BeLoveHaveFun
4 ай бұрын
@@keirfarnum6811 straight blade forks were all the rage in 89. I went from the gator blades to a custom ordered 1" tapered, straight, fillet brazed Tange prestige fork from Jim Moulden..... they were so skinny I thought I'd trash them in a week..... but after over 3 decades of abuse they are still holding strong. Steel is real.
@paulbrodie
4 ай бұрын
We never had a Gatorblade come back. Proud of that...
@BeLoveHaveFun
4 ай бұрын
@@paulbrodie Great product, terrible timing... I wish I held on to them.
@moritzanselm2803
4 ай бұрын
very nice
@paulbrodie
4 ай бұрын
Very nice
@pilbeam1uk
4 ай бұрын
That was great. It was good to get an explanation of how Harvey made the composts. I'm looking forward to the build. Good luck at the swap meet with finding the parts that you need.
@cest7343
4 ай бұрын
A Master, a Sportsman, humbling and a lot to look up to Master Broadie, as always a treat to drop by 👍
@ericpmoss
4 ай бұрын
I love the brake booster - my Moulton XTB has a light fork that is great for sensitive suspension, but twists like crazy with the V-brakes, and a booster would make it 100x better. Sadly I can only find quality boosters on eBay…
@Billy-burner
4 ай бұрын
build one bro. Use an old horse shoe or something lmao.
@weedmanwestvancouverbc9266
4 ай бұрын
A guy on Imgur posted some photos a few weeks ago of Moultan frames as he was the kids Godfather
@ericpmoss
Ай бұрын
@@Billy-burner I'd love to, but I am traveling, and I don't have a shop or shop tools. Plus, it's a lot nicer to have something actually designed and safety-tested and not heavy AF.
Пікірлер: 172