Make this MCU for DAWs and you would sell a ton of these! Especially if you could map plugins across the pan pots and use the tap tempo button (appears to have arrows around it) to be a zoom control.
@eliaszerano3510
3 жыл бұрын
It would be even more useful if they would create drivers for each DAW instead of that retard MCU protocol
@galgogergo
3 жыл бұрын
@@eliaszerano3510 +1 for custon drivers! Although now it features MCU and HUI mode after the newest firmware update
@mikemcbride8625
4 жыл бұрын
That beard is super on point rn plus this controller looks pretty great too! 🔥
@chrisw42980
3 жыл бұрын
Can two of these be used simultaneously with LV1 to allow for additional faders/control?
@omgMBP
4 жыл бұрын
So throwing in the towel in on all glass mixing? (It was never a good idea)
@treztracks
4 жыл бұрын
Can i use this with my DAW🥶
@thegreenguy8837
3 жыл бұрын
The fit system according to the website now does HUI/Macki controll, allowing for usage with PRO TOOLS, LOGIC, ABLETON & CUBASE .
@hlink3456
4 жыл бұрын
If this interests you, perhaps you should check out the PreSonus S series mixers... built in effects, touch screen with the ability to use tablets as additional screens, more faders with even better LCD scribble strips, works well with DAW's but especially StudioOne and the price is much less. Just sayin'. They aren't exactly the same "animal" so to speak but it may work better for some of your applications than this.
@GotBettaBeats
3 жыл бұрын
I saw online that the waves fit control now supports Mackie control/HUI. Are there any videos showing how well that works?
@MusicSasho
2 жыл бұрын
I can not see the small screens from the pan knob! Can you put the pan knob above the small channel screens?
@rahulmurthy1763
4 жыл бұрын
Great simple looking controller. Is it possible to use Protools & Logic in it.
@WhostolemyToastXX
4 жыл бұрын
which rack case that is? also is that the dell 24 touch screen?
@nathanfuerte4253
2 жыл бұрын
HI, Just like to know what digital snake i are you using?
@kamilslaby_
3 жыл бұрын
I am worried about how this screen shakes when he touches it. I wonder how careful you need to be during live show. Which could potentially slow you down.
@julienverardo6432
3 жыл бұрын
I have a question regarding this controller : Would Waves Fit be compatible as a control surface only with Logic Pro X? I am not using LV1, but I would love to have the FIT as my DAW controller ... would that be possible? Thanks a lot !
@thegreenguy8837
3 жыл бұрын
Can you chain multiple of these into the same system, so you can have a expanded faderarray? Just for the people among us that have a need for more than 16 Faders?
@waves
3 жыл бұрын
Hi @TheGreenGuy, not at the moment. It may be coming in a future update, but we have no ETA to provide as of now.
@harisjavoric1950
4 жыл бұрын
The intro is a White stripes tribute? :D
@mikrosound
4 жыл бұрын
Me: Price? Waves: Yes
@slowgold20
4 жыл бұрын
I mean 10k for a 40ch mixer isn't unheard of... but still. Idk about this one lol
@cerulean-crystal
4 жыл бұрын
This would be awesome if it werent for that price....
@TwstedTV
3 жыл бұрын
@@cerulean-crystal If waves made this at $799.00 this would sell by the 100's of millions... Waves would be rich over night. specially these days were millions of people have home studios. This mixer is the perfect design people have been looking for. Its compact and looks professional. Im wondering if this mixer has banks.... so people can extend its mixer. for example Banks A, B, C, D. which would be 16x4.
@SolidRockStudio
3 жыл бұрын
@@TwstedTV Yes, you have 8 banks and 8 custom layers in LV1. Pretty sure the bank spill follows blocks of 16 channels in protools or your DAW too
@TwstedTV
3 жыл бұрын
@@SolidRockStudio It doesn't matter anymore. I decided to purchase (2) of the Solid State Logic UF8, immediately after Waves posted that it was not meant for DAWs in the comments.
@alejandrobracho5408
Жыл бұрын
Hola buenas noches tengo una duda, hoy estaba utilizando mi midi fit en la bodega y de la nada el display del canal 12 dejo de funcionar, el resto estaba encendido y ese puntualmente se apago. Sabrán algo sobre eso ? Saludos !
@waves
Жыл бұрын
Hi there, our tech support department is open 7 days a week and will be more than glad to assist. Please contact us directly: www.waves.com/contact-us
@neonvoid
Жыл бұрын
Is it possible to use it with Ableton in Mackie mode now?
@waves
Жыл бұрын
The FIT controller is HUI/Mackie-compatible for Pro Tools, Logic, Ableton, Cubase.
@neonvoid
Жыл бұрын
@@waves Awesome Thank You!
@donbmf7408
Жыл бұрын
@@waves Doesn't work well with Cubase
@yuvinshetty
4 жыл бұрын
Cool ✨✨✨
@gobrad
3 жыл бұрын
Hi, hopefully you can help me out.. I have a two piece live vocal setup using backing tracks some of which are karaoke tracks! I was using a studiomaster console which had amazing vocal presence and effects that came from the old carlsbro consoles… unfortunately it packed in a couple of years ago and i replaced it with the behringer XR18 hooked up to my laptop… As i have lots of waves plugins, i’m thinking of the LV1 System but haven’t a clue as to what exactly i need baring in mind it’s only for a two piece vocal setup using tracks , but i’m looking for that vocal punch/presence dynamics for my live gigs… So going with the LV1 what would i need exactly? I have a 32GB macbook pro so i guess that’s a start…. i’d very much appreciate your help 🙏🙂
@waves
3 жыл бұрын
Hi there, thank you for reaching out. We suggest to reach out to our support team who are most qualified to help you out with your set-up: Please contact us directly: www.waves.com/contact-us
@happytravel4961
4 жыл бұрын
Is there any information about how to use tracks live software with mixer X-Air XR 12 ?
@waves
4 жыл бұрын
Hi Happy Travel, please note that the development of Tracks Live has been long discontinued and it is currently only officially supported while using the Waves SoundGrid ASIO/Core Audio driver.
@kinglevelsz
4 жыл бұрын
Is this compatible with a daw and the price is too high for this
@hairobarrera6111
4 жыл бұрын
😍
@donbmf7408
Жыл бұрын
I bought one last week with the intention of using it with Cubase 12 and it doesn't work very well. Only one bank of 8 faders is recognized and the pan Pots send crazy erractic info to the software. One of the Solo buttons doesn't work. The manual is extremely vague and wrong on how to set this up. The link to the firmware update on the waves website is broken. Be aware of buying this, other than using it exclusively for the LV1
@waves
Жыл бұрын
Hi there, our tech support department is open 7 days a week and will be more than glad to assist. Please contact us directly: www.waves.com/contact-us
@TwstedTV
3 жыл бұрын
I would love to use this controller to control my DAW mixer in Studio ONE..... Is this possible ???
@waves
3 жыл бұрын
Hi TwstedTV, please note that the FIT Tactile Control is only officially supported with the Waves eMotion LV1 Mixer.
@TwstedTV
3 жыл бұрын
@@waves YOU GUYS seriously need to take a hint...... So many people are asking for this mixer to use with their DAW and control their DAW Mixer. I know you are just a media staff that works for waves social media communications department for waves. You need to tell your boss what people are asking for this mixer to use with their DAWs to control their DAW mixer. A 16, 24 and 32 fader version with 4 fader banks buttons. THIS is exactly what people want. Its simple and compact. added feature that would be awesome as well is - meter lights next to each fader the length of the fader. You guys must not like money...... because there is a lot of money to be had here if this was made available for people to control their DAW mixer.
@eliaszerano3510
3 жыл бұрын
rather get a Faderport which supports studio one NATIVE. The Native Protocol lets you customize the plugin parameter mapping. with MCU/HUI you can't !
@thegreenguy8837
3 жыл бұрын
The fit system according to the website now does HUI/Macki controll, allowing for usage with PRO TOOLS, LOGIC, ABLETON & CUBASE .
@buscandolaverdad8686
3 жыл бұрын
Can I use with mpc one on stand alone mode?
@waves
3 жыл бұрын
Hi Buscando, please note that the FIT control unit is only officially supported with eMotion LV1 systems.
@djthornton98
3 жыл бұрын
@@waves take it to people higher up and let us use it on DAW’s so many more people would buy this
@Astrovic1
4 жыл бұрын
Does it work with fl studio
@waves
4 жыл бұрын
Hi Astrovic, the FIT control unit is only officially supported for controlling the eMotion LV1 Mixer.
@galgogergo
3 жыл бұрын
@@waves ... and now? I've heard there's MCU/HUI mode now available...
@galgogergo
3 жыл бұрын
@@waves also, can you tell if the faders are 10bit or just 7bit in MCU or HUI mode?
@thegreenguy8837
3 жыл бұрын
@@galgogergo You d have to try it. Their website only lists PRO TOOLS, LOGIC, ABLETON & CUBASE . Sry for the caps. Just copying of the website.
@russellrush5107
4 жыл бұрын
Do it work with PreSonus Studio One 2 and 3
@aces3261
4 жыл бұрын
Really dude?
@eliaszerano3510
3 жыл бұрын
rather get a Faderport which supports studio one NATIVE. The Native Protocol lets you customize the plugin parameter mapping. with MCU/HUI you can't !
@thegreenguy8837
3 жыл бұрын
The fit system according to the website now does HUI/Macki controll, allowing for usage with PRO TOOLS, LOGIC, ABLETON & CUBASE .
@derekrushe
4 жыл бұрын
Makes digital touchscreen mixer......... realises most engineers don't like using touchscreen...... makes, basically a deal for it...... should have made a desk initially...
@ovum15
4 жыл бұрын
Soo expensive guys!
@liushuo9766
3 жыл бұрын
MIDI plus is a Chinese company that manufactures cheap midi keyboards. And the quality of their products is terrible.
@64hapz
3 жыл бұрын
$1,200 ? You can get the Icon qcon pro x for $1,000 & it will allow you to control your DAW. Works with like 8 different DAWs, has motorized faders level gauges, etc. & it lets you do it all in your preferred DAW (has like 8 different DAW presets + user setting). Having to relearn a new DAW is a pain in the rear, sorry but that’s a no for me dawg.
@thegreenguy8837
3 жыл бұрын
The fit system according to the website now does HUI/Macki controll, allowing for usage with protools logic, abelton and cuebase.
@weareparkerful
4 жыл бұрын
Im gonna buy me a car instead
@eliaszerano3510
3 жыл бұрын
please get away from this ancient lame HUI/MCU protocol and start something new. Native Logic, Live, Cubase etc... Implementation would make more sense. Heck with MCU/HUI the user cant even create custom plugin parameter mappings. Presonus shows how to do it with StudioOne and their FaderPorts !
Пікірлер: 66