I hope you show using this frame straightener in future videos. You know back in the 90's I had a good friend that had a body shop. I was there quite a bit. He would go to Dallas and buy rebuildable cars and bring them into the shop and fix them. He did not have a frame machine, but he did have a guy that he would call that would go to a lot of different body shops in around a 100 mile radius of his home. He was called " Fred the Frame Man". He had a big long portable machine like yours but longer and heavier looking. He was probably in his 50's in age and his father had done the same work as him for years before him. Fred took over after his father retired. I was always amazed how he could take a few measurements with a tape measure and pull everything back in place with relative ease! I remember one ford pickup that was hit in the front corner and was knocked into a ditch. That poor truck was terribly twisted and the frame looked like a parallelogram! I said, " I gotta see this"! Fred got there looked at it and shook his head a couple of times. Drug out his machine and went to work. He would put a heavy piece of wood timber here or there and fire up his machine and pull. Dang, after about 45 minutes you could see all the body panels lining up. That is where years of experience told him just where and how much to pull. I will always remember that. Keep up the good work. Tom
@LakesideAutobody
4 жыл бұрын
I'll upload the full repair using the frame machine next week - nice to hear from you :)
@ericcarr1648
3 жыл бұрын
I would just like to thank you for all your knowledge you share in your videos. I've loved auto body work my entire life, but just started in the field about 4 years ago. The rock star thing didn't work out. LoL, but your videos have helped me out more then you can imagine. So once again, thank you so very much for all the videos. They've help me out a ton in this trade that I love so much.
@LakesideAutobody
3 жыл бұрын
I'm so glad to hear that Eric - that makes my day. Body work is a nice relaxing occupation and something you can really be proud of - I'm glad I can help you out. Feel free to ask ?s any time. Have a good week my friend :)
@ericcarr1648
3 жыл бұрын
@@LakesideAutobody thank you very much, sir.
@chriskeck3689
3 жыл бұрын
I'm about to have my 2015 Dodge Challenger's frame straightened after an accident it was just in. Wanted to get an idea of what's about to happen. This video was solid. Thanks!
@LakesideAutobody
3 жыл бұрын
You're welcome - thanks for the support :)
@deeremeyer1749
Жыл бұрын
What's about to happen? You're going to learn how much "frame repair" any quality local body shop with do on a POS "unibody" so-called "muscle car" that's 7 model years old,.uninsured, totalled by the last insurance company that wrote a policy on it, has ZERO "book value" as a totalled wreck "muscle car" with a "bent frame" that WHOLESALE isn't "worth" a year of "full coverage" insurance premiums AND is being "built" by a complete tool that will probably want to "finance" the "frame repair".
@67fairlane12
4 жыл бұрын
loved the guitar intro and the camera work. Explanations are great! Looking forward to the repair
@LakesideAutobody
4 жыл бұрын
Thanks - I'll have the full repair uploaded next week. Glad you liked the video - have a great weekend.
@UndergroundPaintKing
4 жыл бұрын
Definitely will be watching!
@LakesideAutobody
4 жыл бұрын
Thanks, have a great week end UPK
@UndergroundPaintKing
4 жыл бұрын
Lakeside Autobody thanks Jerry...have a great weekend
@husky1232
4 жыл бұрын
Look forward to part 2 thank you Jerry
@LakesideAutobody
4 жыл бұрын
You're welcome - I'll have the full repair uploaded soon.
@martymurphy9627
4 жыл бұрын
Thanks for sharing this. I have seen very little on the frame straighteners.
@LakesideAutobody
4 жыл бұрын
You're welcome
@SWTWHITEGSR
3 жыл бұрын
Best video on being thorough . Good video.
@LakesideAutobody
3 жыл бұрын
I'm glad you appreciate the content - thanks for the support :)
@davidblaze1652
4 жыл бұрын
Keep up the good work. Thanks for your videos 👍
@LakesideAutobody
4 жыл бұрын
You're welcome - have a good week end.
@hunkydude322
4 жыл бұрын
hope you show us the start to finsh or close to the finish product very interesting and informative, and for you rookies out there don't try this at home until you get some experience in this feel and feel comfortable doin this task, its dangerous for you rookied, always safety first, awesome videos. I learned this trade in vocational school, and plan getting back to it, just been doin other businesses etc.. anyways great videos as always.
@LakesideAutobody
4 жыл бұрын
Thank you and I'm glad you enjoy the videos. I should have the video - start to finish - uploaded middle of next week. Have a great weekend :)
@jayinmi3706
4 жыл бұрын
Never seen a frame machine that wasn't a huge metal table. That's cool.
@LakesideAutobody
4 жыл бұрын
Here's another very common one that is not a rack type, but you have to have pull pots or anchor pots in the floor - (spots to anchor chains to) www.brewcocollision.com/frame-straightening-power-post.asp They are nice because they are easy to use and very versatile (pull from any location).
@evo6swap
Жыл бұрын
Thank you very much awesome work
@LakesideAutobody
Жыл бұрын
No problem 👍 Have a great weekend :)
@balloney2175
2 жыл бұрын
This is what I wanted for my Honda Civic with 279,000 miles in it.
@cfldentrepair
5 ай бұрын
New subscriber! Love the videos.
@LakesideAutobody
5 ай бұрын
Thanks for subbing - thanks for watching :)
@bobcrouch6062
4 жыл бұрын
Love this resource. So helpful & informative. Thanks so much. Also love the eagle photo.
@LakesideAutobody
4 жыл бұрын
You're welcome. Funny story about that eagle shot. I told my wife, "any time you see those white and black ducks let me know - I'll get the camera - I want a shot of them for my channel" Every time she would alert me, I'd run for the camera, go outside and they would dive under the water and be gone. After about the 10th time (I was about to give up) I ran outside, missed the ducks again, but heard this loud screech - Woosh! Big eagle lands right in the pines above my head - crazy. Have a good weekend :)
@bjr2379
4 жыл бұрын
@@LakesideAutobody 🇺🇲🦅👍
@TheTyisawesome
3 жыл бұрын
Only one guy in my town that has a frame puller and after a front and collision I am in need of my driver's side frame to be pulled straight again. Was curious what was going to be done.
@GuzJ39
3 жыл бұрын
love the video. what brand of stands are those for the pinch weld clamps? is that an assembly that came with the puller? or did you fabricate?
@moparnut6286
4 жыл бұрын
Great video....... now I have another tool on my wish list LOL!
@LakesideAutobody
4 жыл бұрын
I have a lot on my list - should have been asking for this stuff for Christmas when I was little.
@hunkydude322
4 жыл бұрын
don't think that tool is cheap but if you plan on using it enough times it will pay for itself.
@chadiahhaywood481
3 жыл бұрын
Do you believe body shops would allow you to ask to only have the frame pulled? I have all the parts and pieces needed to rebuild my car but I’m unsure if they’ll only stop at pulling the frame and patching it up to then let me take my car back so I can finish the job.
@LakesideAutobody
3 жыл бұрын
Each shop is different. You may have better luck at the smaller shops. If it's an easy pull I think you could find a shop to do it. Stop in and just ask if that's something they do. It can't hurt to ask. Jerry
@bjr2379
4 жыл бұрын
Enjoyed the video and looking forward to more! 🇺🇲🍺
@LakesideAutobody
4 жыл бұрын
Thanks - I uploaded the actual repair
@elsdp-4560
4 жыл бұрын
THANK YOU...for sharing. Nice machine.
@LakesideAutobody
4 жыл бұрын
You're welcome - have a nice weekend my friend.
@atx-cvpi_99
4 жыл бұрын
Crown Victorias are full frame.
@billgroel4463
3 жыл бұрын
Great video thank you for sharing
@LakesideAutobody
3 жыл бұрын
Thanks for watching - you're welcome :)
@user-kd6dm1rd8p
Жыл бұрын
Jerry i have always been subscribed to you. But today i was unsubscribed somehow. Excellent video
@LakesideAutobody
Жыл бұрын
Thanks Geoffrey - I appreciate you subscribing - have a good weekend :)
@deeremeyer1749
Жыл бұрын
Wow. It looks like you do TONS of "frame work" since that "frame straightener" looks like it left the "tool truck" years after that "could be a good car" Rustang had it's last "drag race" behind a tow truck.
@LakesideAutobody
Жыл бұрын
kzitem.info/news/bejne/ropo15Wof6GQoYI or kzitem.info/news/bejne/mIOtyZmKbmeLnag or kzitem.info/door/PLOP9eoG14-I9INn6UXNhOwUiXBHoSivQ4 Not sure exactly what you were asking so I gave you a bunch of them. Happy Holidays to you and your family 🎄❄🎄🏈😊
@urassisdragon
Жыл бұрын
I am looking online and the champs dozer frame stick and is $3600 with the overhead boom and the air pumps. The jackco one is like $2500 with a comparable setup. Was wondering if they are pretty comparable? I had a homemade “L” That I used for years but was included in the sale of my shop (the equipment ended up being a deal breaker for the shop). So now have to replace it all…
@LakesideAutobody
Жыл бұрын
I imagine they are very similar 👍🛠😊
@hidros1461
3 жыл бұрын
Thanks for the intel, subbed
@LakesideAutobody
3 жыл бұрын
Thanks for the sub! Have a good weekend.
@dougkuechenmeister8733
4 жыл бұрын
Very cool! Thanks
@LakesideAutobody
4 жыл бұрын
You're welcome - have a good weekend.
@sail235aeh
4 жыл бұрын
Great video !
@LakesideAutobody
4 жыл бұрын
Thanks - have a great weekend.
@gmjimmi
4 жыл бұрын
Great videos, new subscriber, love the music
@LakesideAutobody
4 жыл бұрын
Thanks and thanks for the sub - glad you enjoyed the music - each video gets an original riff :)
@keeponkeepkeepingon8376
3 жыл бұрын
* LAKESIDE AUTOBODY I have a question: For example when a vehicle/car has been rear ended by a tractor trailer truck (hitting one side of the rear bumper) cracking the bumper / ripping off one of the tail lights aka brake lights and smashing the rear quarter panel...... QUESTION ONE (1) What are other possible issues that are likely to have occurred to the vehicle that the naked eye and non mechanics/non body shop specialists would not be aware of* *could yah list the guestimate price for each repair including the obvious repair/replacement of the bumper, tail light and rear quarter panel*
@LakesideAutobody
3 жыл бұрын
Well.... There's a lot actually. 1) suspension damage - I did a rear end job on an '87 Nova and it broke the welds that held the control arm to the unibody. 2) Wiring could be damaged and you'd have to replace that 3) Obviously the unibody parts will be wrinkled and damaged 4) Muffler system pushed up into the car 5) Deck lid hinges and support might be messed up Those are the ones off the top of my head but it would be hard for me to give an estimate for the prices of each because you really to look up all the time and costs of each. I can't really even estimate as I never wrote the estimates - just did the work. I know it would be over a few thousand dollars though.
@not-socustoms5615
4 жыл бұрын
Have you ever considered teaching at your local tech? You remind me of one of my instructors from back in the day
@LakesideAutobody
4 жыл бұрын
No I haven't but that's nice that you think I could teach vocational auto body. Have a great weekend :)
@not-socustoms5615
4 жыл бұрын
Lakeside Autobody it’s a struggle for some up and comers in this industry, a lot of good technicians can do amazing work but can’t explain how or why to someone with basic vocational school experience. I had one instructor who was really good with explaining like you and it helped me get a head start as a rookie employee at a dealership. Honestly after I put in my years I hope to transition to teaching the trade.
@pepeescobedo5396
4 жыл бұрын
@@not-socustoms5615 ,
@not-socustoms5615
4 жыл бұрын
Pepe Escobedo what’s up
@chuckstewart9375
9 ай бұрын
Question....whats the name of ur frame puller.. and where u order it...iam interested getting one
@LakesideAutobody
9 ай бұрын
This one is no longer made. Try - Jackco 852B 10ton Body Straightener. Here's instruction for all types of dozer pullers - s3.amazonaws.com/cdn.autobodytoolmart.com/downloads/tech-sheets/BodyStraightener.pdf
@ntdnr1JeanClaud
2 жыл бұрын
What if you have no sill clamps?
@LakesideAutobody
2 жыл бұрын
You can still use it - just have to get creative. You can even use a tree and a winch or come along :)
@terrybaptist795
8 ай бұрын
You dont have frame chassis table to clamp the car down to?
@LakesideAutobody
8 ай бұрын
No - you're actually supposed to use this dozer type puller with nothing - just by itself. Check out how here - s3.amazonaws.com/cdn.autobodytoolmart.com/downloads/tech-sheets/BodyStraightener.pdf
@nedunonnyp704
3 жыл бұрын
Please How Can I Secure that Pinch Weld Setup You have at 03:22? Is It Sold Anywhere? It Doesn't Seem to come with any of the Frame Straighteners that I've Seen Online, even the One from the Link to the Website you provided Doesn't come with it...
@LakesideAutobody
3 жыл бұрын
It comes with this frame puller - I think you can buy it separately though to from the same web site - www.autobodytoolmart.com/product/champ-10-ton-body-straightener-kits/auto-body-frame-straightening-equipment?gclid=
@nedunonnyp704
3 жыл бұрын
@@LakesideAutobody Well I haven't seen it anywhere on their website. But, do you know if they sell the swivel types/model Frame Straightener? I Know Jacko Sells them.
@LakesideAutobody
3 жыл бұрын
@@nedunonnyp704 You're right they don't sell it separately - I can't find much of anything in the way of "rocker pinch weld clamps" on the internet. I'll keep looking though if I find ones like I have or the swivel type, I'll reply back again - Jerry
@nedunonnyp704
3 жыл бұрын
@@LakesideAutobody I called and spoke to them today and they said none of their frame racks come with that pinch-weld clamp. Then I thought you might've had the Frame rack for some years and the design/parts it came with might've changed over the years to explain why the Pinch-Weld clamps looked different. But the guy I spoke with said He's been with the Company for 9Years and their have been modifications but that pinch-weld clamps in the picture have remained the same. I even sent them a screenshot of the one in your vid. But they said they don't and have never carried that clamp style..
@LakesideAutobody
3 жыл бұрын
@@nedunonnyp704 The pinch weld clamps that you see in the video came with the puller. If you order this: www.autobodytoolmart.com/product/champ-10-ton-body-straightener-kits/auto-body-frame-straightening-equipment - you will get pinch weld clamps like mine. You have to because that's what the company says. It includes: Includes: (1) puller Hydraulics (2) 6 ft. chains with grab hooks (2) sheet metal clamps with pull rings (1) underbody beam with pinchweld clamps and floor stands Overhead boom (4084 Models Only) I think the guy on the phone wasn't sure what you were talking about. Is there another clamp I was using in the video that you might be talking about? We'll figure this out my friend :) Jerry
@bosinious
3 жыл бұрын
Great video and easy to follow instruction. How do you do side pulls with this frame straightener?
@LakesideAutobody
3 жыл бұрын
Here's the instructions. s3.amazonaws.com/cdn.autobodytoolmart.com/downloads/tech-sheets/BodyStraightener.pdf Here's a video that a side pull was done but just on the body: kzitem.info/news/bejne/2pituGuMnJWdm3Y
@bosinious
3 жыл бұрын
Lakeside Autobody Thank you for sharing
@IM-nh8hn
Жыл бұрын
How would you tie down a pickup truck with this setup?
@LakesideAutobody
Жыл бұрын
It's actually even easier because you don't have to use the clamps, bar, etc. Just chains, hooks and anything your imagination can come up with. Obviously this is a bottom feeder frame machine but with a bit of creativity it can work for almost any pull. Here's the instructions for basic hookups body on frame and/or uni body - s3.amazonaws.com/cdn.autobodytoolmart.com/downloads/tech-sheets/BodyStraightener.pdf
@MiturBinEsderty
Жыл бұрын
Yeah a v6 rear clip
@user-fc6re6ib2r
Жыл бұрын
Hello, what Kinde of porto power you recomend?
@LakesideAutobody
Жыл бұрын
I'm using a Harbor Freight and it works well. I'm sure a brand name would be nicer but that's always going to cost more. You can't beat Blackhawk if you have the $.
@nedunonnyp704
3 жыл бұрын
Hey, How Would You Set Up To do A Side Pull With that Frame Straightener? 🤔🤔
@LakesideAutobody
3 жыл бұрын
Here's the instructions for the kit: s3.amazonaws.com/cdn.autobodytoolmart.com/downloads/tech-sheets/BodyStraightener.pdf Here's how I use it for side pulls - kzitem.info/news/bejne/s4ml1q5skYmfloY - hope that helps :)
@boxchevydame
4 жыл бұрын
Love your work bro are you close to the grand rapids area by chance
@LakesideAutobody
4 жыл бұрын
I'm up by Grayling, MI.
@brucepigeon3671
3 жыл бұрын
Not trying to be overly critical, But. That Champ setup is based upon 75 year old "Dozer technology" and was never designed to do unibody, until someone added the cross bar with the clamps. At best the Champ system is a sheet metal puller. There are much better systems out there.
@LakesideAutobody
3 жыл бұрын
Absolutely - but not too much room in my garage :)
@williammullenix4298
4 жыл бұрын
Where did you get your pulling clamps, very good video.
Great video. What’s the name of this portable machine?
@LakesideAutobody
4 жыл бұрын
www.autobodytoolmart.com/product/champ-10-ton-body-straightener-kits/auto-body-frame-straightening-equipment?gclid=Cj0KCQjwzZj2BRDVARIsABs3l9JW8GKD97qoTb3P9s1s3toEbu6wTcdTbtJ9sxDaWKkXvBi0OIYawrkaAt-hEALw_wcB This video puts it to work - kzitem.info/news/bejne/2ZiwrYxqoYlqpKQ - Have a great weekend - Jerry
@tahsina.alkhuwaiter9990
4 жыл бұрын
Awesome
@boistoys5451
3 жыл бұрын
How would you attach it to a body on frame vehicle like the toyota 4runner to pull the front end?
@LakesideAutobody
3 жыл бұрын
Here's the instructions to that frame straightener - it shows how to do mostly body on frame: s3.amazonaws.com/cdn.autobodytoolmart.com/downloads/tech-sheets/BodyStraightener.pdf
@boistoys5451
3 жыл бұрын
@@LakesideAutobody Thanks
@edwinespinoza6569
3 жыл бұрын
About how much does a framework like this cost?
@LakesideAutobody
3 жыл бұрын
In the thousands for sure. This car would not have been repaired as it would have been a total loss. I figured it would be good to see and the car was only $800 - clean, everything worked, loaded, plus the Mach 460 Ford factory audio system - I think the loudest factory stereo ever made - and I've heard a lot of them.
@rogergarcia4490
3 жыл бұрын
How Much Is The Price Of This Type Of Jobs?
@LakesideAutobody
3 жыл бұрын
This car would have been totaled. Even if it was newer it probably would have been a total loss. Really the trunk floor, quarter, rear panel, and deck lid should have been replaced - along with bumper assembly, tail lights etc. - that would add up fast along with labor - well into the thousands for cost.
@rogergarcia4490
3 жыл бұрын
@@LakesideAutobody Wao! I Ask Because My Car Got Hit Badly Recently On The Left Corner Rear,I Known 100% Sure Is Considered Total, Even Tho It Can Be Fixed But I Was Wondering What’s The Estimated Priced Of That Labor
@LakesideAutobody
3 жыл бұрын
OK got it. unfortunately damage like this is $. Labor prices for frame repair is more than just regular body work/painting. Say regular shop time is 90/hour then frame time can be nearly double that 150/hr or more. There would be some good time on that job too. I didn't write the estimates but I know that job would easily break 2000 dollars. Is it possible to fix it enough to just drive it? Jerry
@rogergarcia4490
3 жыл бұрын
@@LakesideAutobody Wao,Yeah Actually It Can Be Fixed To Drive,Suspensión Are Intact,I Wish I Can Post Picture Here So You Can See,And Give Me A Opinión
@deeremeyer1749
Жыл бұрын
Lets see the rear sub-frame in that "could be a good car". And when does the "structural repair" 4-minute "educational" video come out since "frame straightening" is not "structural repair".
@LakesideAutobody
Жыл бұрын
kzitem.info/news/bejne/2ZiwrYxqoYlqpKQ
@pauldow1648
4 жыл бұрын
Ok. Let's get crack'en...
@LakesideAutobody
4 жыл бұрын
I'll git 'er done by next week and upload the full repair :)
Пікірлер: 118