We really favor the Omron software as it allows us to work with PLCs that were devolved over such a large timeframe as a few years ago I had to work on a machine with CPU1
@realpars
2 жыл бұрын
Thanks for sharing that!
@orolowob.ifeoluwa2886
Жыл бұрын
You guys are always wonderful with your training I must say, please can you guys do a training on Omron CJ series 😉 thanks
@vinodkumarvinu5441
2 жыл бұрын
Please make a video about DCS every component
@IngDzib
2 жыл бұрын
Thank you sir!
@realpars
2 жыл бұрын
Our pleasure!
@user-el2pj1gr3r
Ай бұрын
Sir kindly make a video on NX701-1600 OMRON PLC AND PROGRAMING PLEASE PLEASE BIG FAN OF YOU SIR
@realpars
Ай бұрын
Thank you for your topic suggestion, I will happily go ahead and forward this to our course developers. Thank you for sharing!
@user-el2pj1gr3r
Ай бұрын
@@realpars please make it hurry and how can I configure my drive communication or ethercat coupler switch with plc please please sir big fan
@MrWaalkman
2 жыл бұрын
Up to 1000 I/O? The GE Series Six was doing either 32K I/O or 32K inputs and 32K outputs in the 80's. I can't remember which, it's been too long... :) The biggest one that I ever installed had about 3K of I/O attached to it. It never broke a sweat, clocking in at somewhere around 50ms for the scan time. For their day, these were simply amazing PLCs. I discovered that by soldering in a jumper at JP7 it would double the size of the smaller boards from 4K to 8K on its PLC program memory. GE actually made just the one board, and would clip JP7 out of the "smaller" boards and label it as a 12K board (4K of PLC memory and 8K of registers). Otherwise it was left in and labeled as a 16K board (and priced for about $4000 more). GE was not pleased with me... But the Omrons look like capable PLCs, and "Rockwell" is nowhere to be found in their name. I wholeheartedly approve. :)
@realpars
2 жыл бұрын
Hey MrWaalkman. Impressive indeed. Those older GE PLCs were solid and did a great job with 80's I/O.
@GautamKumarGoswami
2 жыл бұрын
I have no idea over Omron make PLCs. But I have worked with Delta, Siemens & Allen Bradley PLCs. Want to know how these PLCs perform in real-world & their durability matters. Durability is an important aspect. Can anybody give me an idea?
@sundayoyanda7386
2 жыл бұрын
Just as Allen Bradley, omron plcs are known to work perfectly well in extreme environmental conditions such as dusty areas and highly humid environments as well. If I were to rank it out of the 3, it will be (1)Allen Bradley, (2) omron then finally (3) Siemens. Humble Technician's perspective.
@iosif_ch
2 жыл бұрын
Omron PLCs are very popular in marine industry. They have been proofed very durable through the years. I have seen old Omron series running in really bad conditions for many many years! And of course I use them all the time.
@rafaelcolomboguidi3255
2 жыл бұрын
I work a lot with omron in the ceramic industry where dust is extreme, also at high temperature. I see plcs with 30 years of durability.
@TheNoobDota
2 жыл бұрын
Omron plcs are great and reliable. However, for larger applications, allen bradley is probably the best bet. For smaller machine application, omron plcs are awesome.
@DazC2
2 жыл бұрын
I use Omron PLCs on vehicles (special vehicle conversions. They are subject to vibration and motion a lot). I have taken out PLCs after 15 years of use and refitted them to other vehicles. I've seen 25 years of use on some parts. and have hardly ever had component failure across roughly 400 different sytems that I have commissioned over the last 26 years.
@yenerkorkmaz4272
2 жыл бұрын
You can actually go beyond 1000 I/O with NX102 via adding couplers. We have done this in one of our projects.
@TheNoobDota
2 жыл бұрын
You mean adding ethercat couplers distributed? Lots of people still prefer using ethernet IP for whatever reason.
@yenerkorkmaz4272
2 жыл бұрын
Yes, NX-E.. couplers can help here.
@okami3
2 жыл бұрын
@@TheNoobDota NX-ECC for EtherCAT, NX-EIC for EtherNet/IP. Both can be used with NX102.
@iwasicutica
2 жыл бұрын
I started to study sysmac studio recently. It's so difficult for me;( If someone knows any recommend site or book of sysmac studio programming, plz teach me. Thanks.
@shearzy3152
2 жыл бұрын
Sysmac studio is far better in a lot of ways than cx programmer, However Sysmac still has some weird bugs that are really annoying. For example, ctrl+C and ctrl+V don't always work, especially for pasting tags, Sysmac doesn't always recognize that the pasted tag already exists and instead tries to create a new tag. I really look forward to a fully flushed out version of Sysmac studio.
@DazC2
2 жыл бұрын
As someone starting their first project with Sysmac Studio and having spent about 16 years using CX Programmer, I miss a few features of CX. I liked the smart interface of CX that allowed me to type the instruction quick reference and use the CTRL plus arrow keys to join up the bus whereas I can't see that facility in Sysmac. I have to sort of drag an interconnect and pick a contact/function/instruction. And the other thing I miss is the ability to pick whether a new tag is either a local or global tag as you create it. There are others but I don't want to start a rant!
@user-el2pj1gr3r
Ай бұрын
I had lost my NX701-1600 OMRON PLC PASWARD HOW CAN I RECOVER IT KINDLY HELP ME
@realpars
Ай бұрын
Have you tried reaching out to Omron support directly, or the manufacturer where you purchased the software?
@user-el2pj1gr3r
Ай бұрын
@@realpars yes but didn't get any useful support sir kindly you help me to get that
@mohsinjamal8411
2 жыл бұрын
In monthly subscription will i can access all of your videos of any course ?
@realpars
2 жыл бұрын
Hi Mohsin, Yes, with either of our subscription services, you will have access to our complete course library (500+ video courses). Additionally, you will have access to our Technical Team - consisting of high ranking engineers with a lifetime of experience - who are here to help you out with any questions you might have along the way! Hope this helps! If we can be of any further assistance, please feel free to email support@realpars.com
@mohsinjamal8411
2 жыл бұрын
@@realpars Is there any download option so that later I can watch downloaded videos while offline ?
@enggardityokawuryan6778
Жыл бұрын
Morning sir, I have problem with my cpu nj101-9000, it's error f3 IP 41, can you explain about the solution?
@realpars
Жыл бұрын
This can mean one of two things. Either: (1) the IP node address on the rotary switches is different to the IP address set in the CX-P programmer, OR, (2) You may need to go to the FINS/UDP tab of the Ethernet setup and change the conversion method to "IP Address table". I have heard that if the conversion method is set to any of the automatic modes, the F3 error may occur.
@enggardityokawuryan6778
Жыл бұрын
@@realpars thanks , the IP node address on the rotary switches not the same with IP address in the cx
Пікірлер: 35