Sir can you please tell how to connect each and every thing step by step
@chintanmeher7838
2 жыл бұрын
We are not able to see information on a lcd display. Please suggest us what to do
@aresyt5817
Жыл бұрын
Data not uploading on thingspeak
@sambhavraj.44
5 күн бұрын
What about battery or power supply?
@vinayabhat6174
3 жыл бұрын
Amazing video , good explanation , thank you !
@theindianinnovator4179
3 жыл бұрын
Yes bro
@victoryacquiredinthesis7797
2 жыл бұрын
Sir, is Oximeter sensor MAX30100 will work at ThingSpeak? Hope you would notice this, thanks!
@jericobolado5107
5 жыл бұрын
Good Project I have a few question how to fix problem about void esp8266
@velichetimaidhile5102
Жыл бұрын
Hi sir Iam unable to do this one We are not getting data on lcd and even in thinkspeak
@user-yi6dp2qn8f
8 ай бұрын
my data is not displaying in think speak plz help me
@deepikayadav166
3 жыл бұрын
This code is done in which language?
@mrpankhan7171
2 жыл бұрын
Data can not send to thingspeak cloud. What can i do? Please reply.
@StepSolar1
3 жыл бұрын
Hy, The Arduino code is working well, readings are shown on LCD also on Serial Monitor but the data is not shown on the Thingspeak channel. Please Guide me what the problem.
@thanushan3072
3 жыл бұрын
did u find a solution?
@bestteletronics6251
3 жыл бұрын
Change user name and password on code line no 74 To be same as your hotspots user name and password
@sanyamsingla7597
3 жыл бұрын
hy share the code
@nalediphogole85
2 жыл бұрын
@@sanyamsingla7597 dID YOU END FINDING THE CODE
@AnkitKumar-sl6fm
5 ай бұрын
@bestteletronics6251 what should i kept?
@khairinnadhirah1779
2 жыл бұрын
Hye sir, can the thingspeak save the data for the particular day/patient that we can look again as history?
@eliendayambaje5744
3 ай бұрын
Congulation!! that your project is very good
@patriciazambrano4025
3 ай бұрын
Why does ours still say "Field Value Unavailable"?
@georgephilip3832
2 жыл бұрын
Hi sir, I have done the project according to your instructions and everything works offline. I am also getting "GET /update?api_key" message on my serial monitor, but no information seems to be passed on to the thingspeak page that I have created. Please help me if possible sir.
@HowtoElectronics
2 жыл бұрын
Add some delay of almost 100-500ms between all the AT commands, it will work
@gangadharv8166
2 жыл бұрын
@@HowtoElectronics how sir can u send a updated full code thats bettter for understand
@shreyamanjucha4621
2 жыл бұрын
Did it work?
@selmar2177
2 жыл бұрын
@@shreyamanjucha4621 I have the same problem the data not display in thinkSpeak
@mehulkumarpjain2704
5 жыл бұрын
Hi sir I have got data on serial monitor but it is not displaying in thingspeak.
@selmar2177
2 жыл бұрын
Moi aussi j'ai le même problème
@Coco123-rl6ll
2 ай бұрын
Data is not updating in ThingSpeak , will you please help 🙏
@Coco123-rl6ll
Ай бұрын
Can we use dht sensor instead of lm35 temperature sensor
@abinetendale2455
5 ай бұрын
Its good but the prototype is not clearly visible
@sushantrimal3080
4 жыл бұрын
Hey guys, I modified the code a little bit and it worked for me. I am able to view the result in thingspeak now. You can try this if you want: drive.google.com/file/d/1tmWPUbg_RAzrquJCmfDkwJSrkmMN97ck/view?usp=sharing Also for people having problem with lcd: everything is fine in the circuit diagram except for the pin 12,13 and 14 of the lcd. It should be connected like this with the arduino: 11 - 5 of arduino 12 - 4 of arduino 13 - 3 of arduino 14 - 2 of arduino
@selmar2177
2 жыл бұрын
I tested it , but not working , any help?
@gajendarmurmu3842
2 жыл бұрын
bro.....help
@selmar2177
2 жыл бұрын
@@gajendarmurmu3842 if you get the data in the platform think speak please tell me I really need it for my project
@harish9864
Жыл бұрын
thanks bro we just got the output....really thanks ....ur help was like just finding a oasis in desert
@MehediNoorKhan
Жыл бұрын
Bro, i have not been able to do it yet. Would you please tell me where have you changed the code?
@dewalax2989
3 жыл бұрын
Amazing project
@electronic7979
5 жыл бұрын
Excellent project
@uppulavandana6122
Жыл бұрын
The data is not displayed in lcd and thingspeak what may be the problem? Could you please tell.
@sw_a_ppy
3 жыл бұрын
Give simulation on proteus of this project
@selmar2177
2 жыл бұрын
Did you get it?
@user-np6ll1rt7u
4 ай бұрын
Is it possible to do this project without the use of arduino?😢
@kshitigaddigoudar7894
9 ай бұрын
Sir can we use a ECG sensor instead of pulse rate sensor? Your reply would be greatly appreciated
@snehankobose1065
2 жыл бұрын
can some one send the code file as i am getting na derror message - F:\Arduino\IOT_health\IOT_health.ino: In function 'void esp_8266()': F:\Arduino\IOT_health\IOT_health.ino:282:16: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings] if(ser.find("E"))
@Coco123-rl6ll
2 ай бұрын
Where to include wifi details in code ?? Please anyone help 🙏🙏🙏
@shivkushwaha5356
5 жыл бұрын
Nice project friend
@lonewolf234
3 жыл бұрын
can we get a copy of this circuit or tinkercad link
@pallabkumarnandi8325
2 жыл бұрын
very nice project
@SaurabhYadav-yb6mz
3 жыл бұрын
Sir your code is working...but I am not getting any graph on Thingspeak Sir please help
@selmar2177
2 жыл бұрын
Met too did you find the soultion?
@johnsonokoli4040
3 жыл бұрын
Please I'm getting this error from the oximeter and I soldered it properly with the right pin connections. "Initialization pulse oximeter... FAILED" Please any solution?
@user-rz5xq7wr9q
9 ай бұрын
Code not working even after redoing it 3 times if you have any tip pls share:)
@host4dmusic
2 ай бұрын
install some important libraries in your software
@shubhtech1260
3 жыл бұрын
why my display is not working with this code
@mrpankhan7171
2 жыл бұрын
Same problem
@hmtboy1605
3 жыл бұрын
Thanks you! so amzing
@ferencakosjambor1144
5 жыл бұрын
Have to add an ecg module(ad8232) please help and arduino is requed for connect to pc
@JEFFERJJEYSON
2 жыл бұрын
Get api key is not showing in serial monitor what should i do now
@deveshvinodsharma
4 жыл бұрын
what are the dependncies of this device
@wali7862
2 жыл бұрын
Amazing project sir, what if you want to also add the heart rate sensor to this project, how will I go about it. Your reply will be greatly appreciated
@FajarMR
4 жыл бұрын
Can u help me, i have a IoT project for Water Quality Control in Aquaculture and i want to check the water quality in Thinkspeak, so how to connect the sensor arduino to thinkspeak? Please help me. This is project for my homework in school.
@justinjosejose2273
3 жыл бұрын
Sir can I know were to add ssid and password in the code???
@digitalmogulnidhi
2 жыл бұрын
what i can do if lcd displaying garbage value????
@bhavanajotwani6626
Жыл бұрын
Code isn't running properly
@abdulkhadar1249
2 жыл бұрын
Showing error on program Sir please can you fix for me... If(ser.find("Error"))
@s.v.r3948
2 жыл бұрын
have you cleared that error
@selmar2177
2 жыл бұрын
Good project
@amrapalibhagat9886
4 жыл бұрын
1)Can I use 0.96 OLED display. If I use it can I include the library of OLED? 2)In this video are you used any library or you program from only source code?
@HowtoElectronics
4 жыл бұрын
Yes u can use 0.96" OLED Display if you are capable enough to modify the code.
@swaritmahalsekar5521
Жыл бұрын
What is BPM bro? Blood Pressure Measurement?
@diwakarsati8167
2 жыл бұрын
I want to buy this project
@mominkhan1993
5 жыл бұрын
TCCR2A was not declare in this scope . i can not run
@dishantchoudhury9810
3 жыл бұрын
How to run the model without WiFi module
@punamsatao7470
5 ай бұрын
I have some problem in that, Data does not send on iot server so how to upload data on thingspeak
@AnkitKumar-sl6fm
5 ай бұрын
Have you got anything
@anushasarla5052
3 жыл бұрын
I am getting error in the code after pasting the API key
@sumengeorge417
4 жыл бұрын
when i add the library file the programme shows the uploading error
@amalmandal8361
4 жыл бұрын
Sir i got error when program is compile ..i.e in the line ISR(TIMER2_COMPA_vect) Error shown is exit status 1 expected constructer,destructer,or type conversion '(' token found
@luvdabade1057
3 жыл бұрын
Hey, did you fix that error?
@thirumalainayagam4387
2 жыл бұрын
hi did u fix the error and if so pls help me out here
@sambhav9093
9 күн бұрын
sir can you provide me the components
@nehauk9314
Жыл бұрын
lcd is not showing results
@beetb238harshalsanap4
3 жыл бұрын
sir , i want to do this project with the help of ATMEGA8 not arduino , can you help with that
@vsj2k
4 жыл бұрын
What is the approximate cost? Is it cheaper than infrared thermometer which costs about 4900 rupees?
@HowtoElectronics
4 жыл бұрын
It will cost you lesser than 1000.
@nalediphogole85
2 жыл бұрын
brother have you finished this project?
@8_Bit_Cloud
3 жыл бұрын
where to enter password and wifi SSID
@AmishaSharma_1
2 жыл бұрын
hello sir, first of all thank you for explaining this project... i am making the same project but i am not getting any data on thingspeak.. I am getting the data on both lcd and serial monitor but not on thingspeak..what is the problem.. Can u pls help me..
@selmar2177
2 жыл бұрын
Moi aussi , j'ai le même problème
@AmishaSharma_1
2 жыл бұрын
@@selmar2177 i am not able to understand what are you saying..
@selmar2177
2 жыл бұрын
@@AmishaSharma_1 I have the same problem in this project
@selmar2177
2 жыл бұрын
@@AmishaSharma_1 did you get it soultion of this problem?!
@dnyaneshwarpatil1230
2 жыл бұрын
I also facing this problem but I didn't get data on lcd also
@regeneong1373
4 жыл бұрын
Hi i really need this for my sch proj can do a step by step circuit connection
@selmar2177
2 жыл бұрын
Yes please
@selmar2177
2 жыл бұрын
Did you get the cruit connection
@kokilaraju5294
5 ай бұрын
I'm not getting result in thing speak can plz anyone help
@nageshsgadwal3782
Жыл бұрын
Where we should write the code and hiw we should upload it please tell sir
@chathurafernando1299
4 жыл бұрын
Can you tell me how to add a buzzer ? When heart beat get increases.
@muhammadshan1151
3 жыл бұрын
simply, use if the condition for it and pin status HIGH. Use buzzer at that pin.
@anuragmohanty3142
4 жыл бұрын
I want to have a conversation with u about this project....can u tell me how we can talk about it?
@hiralmistry4824
3 жыл бұрын
could u plzz help me out ....i m having an error in line 282....plzz let me whats that error
@ehsandidari768
5 жыл бұрын
Sir, I have tried everything but there is display problem on lcd and even thingspeak is not showing the plot. Only serial monitor is showing the data. Can you please help me out with it
@HowtoElectronics
5 жыл бұрын
Use 10k pot at pin 3 of LCD to control the contrast. And also check the Pins assignment from LCD and Arduino w.r.t code mapping.
@Amitkumar-pb7ge
2 жыл бұрын
my esp not connecting to wifi
@pachhman5486
2 жыл бұрын
how to chnage the wifi ssid
@jillellaraghunath
Жыл бұрын
Sir here you used Arduino uno or Arduino_nano board
@HowtoElectronics
Жыл бұрын
Any board will work
@himakarganesh7259
5 жыл бұрын
Can we add GSM module to send a immediate message alert
@HowtoElectronics
5 жыл бұрын
Yes u can. Need a code modification
@shubhtech1260
3 жыл бұрын
@@HowtoElectronics for code pls help me
@dawitdabero8598
3 жыл бұрын
@@shubhtech1260 this is also question of mine
@ehsandidari768
5 жыл бұрын
hello sir.i solve my problem with lcd.but thingspeak is not showing the plot yet.help me plaese
@sushantrimal3080
4 жыл бұрын
How did you solve the lcd problem?
@nalediphogole85
2 жыл бұрын
@@sushantrimal3080 HOW DID YOU FINISH THIS PROJECT.
@snehaghosh749
Жыл бұрын
In AT command which will be the 'ssid' and 'password'? And I am not getting the data to thingspeak does ssid and password will solve the problem? And do we need to use a external powe supply for ESP8266-01?
@AnkitKumar-sl6fm
5 ай бұрын
Same problem. I am not getting the data.... Have you got?
@dawitdabero8598
3 жыл бұрын
cam i get GSM based Arduino code?
@shambhavipoddar397
4 жыл бұрын
Can you tell me which all libraries I should install for esp,LCD,thinkspeak
@HowtoElectronics
4 жыл бұрын
You don't need any extra libraries.
@shambhavipoddar397
4 жыл бұрын
@@HowtoElectronics then I'm not getting output on LCD and thingspeak
@yashisrivastava4788
3 жыл бұрын
@@shambhavipoddar397 were you able to rectify the code?
@sarun9614
Жыл бұрын
@@shambhavipoddar397 same problem to me what you can do after you have not receive a output please if you know reply to me
@infinite-solutions-with-ai
3 жыл бұрын
i am using esp8266-01 wifi module is it nesserry usb converter for esp8266 -01 for your project ?
@AnkitKumar-sl6fm
5 ай бұрын
So what you get
@sanusharma2891
Жыл бұрын
Please mention the components used
@user-nv8fr3vt9j
Жыл бұрын
bro where we get the power supply?tel me brp plzzz
@luqman2871
4 жыл бұрын
I need help regarding esp8266 I'm not able to display anything on thingspeak even after configuring the esp8266.
@sushantrimal3080
4 жыл бұрын
drive.google.com/file/d/1tmWPUbg_RAzrquJCmfDkwJSrkmMN97ck/view?usp=sharing try this. It worked for me
@@vaishnaviingale8623 hey, i am making the same project but i am not getting any data on thingspeak.. Can u pls help me..
@md.sojonbegsojon1498
3 жыл бұрын
I'm trying to compiling but it showing some error "ISR (TIMER2_COMPA_vect) //triggered when Timer2 counts to 124" in my Arduino IDE asking exit status 1 expected constructor, destructor, or type conversion before '(' token
@s__Ranjan
2 жыл бұрын
Bhai tumhara ye problem solve hua
@s__Ranjan
2 жыл бұрын
Sir same problem coming with me please solve my problem sir.
@truptirajashekar8104
Жыл бұрын
Can I get a PPT for this @everyone???
@vlogmusic-nocopyrightmusic8997
Жыл бұрын
Someone please tell me where i put my wifi data like wifi name and password thanks in advance
@mugilasekar3889
2 жыл бұрын
Sir these whole components u gave buyed from which online store
@HowtoElectronics
2 жыл бұрын
Amazon you can
@ramyateju8303
2 жыл бұрын
Total project price ??
@AbdisaWakisaKeneaBML
2 жыл бұрын
Can we make it to send an email by updating the code?
@joyceyik4706
5 жыл бұрын
Good project , I like it . Thanks for sharing :)
@HowtoElectronics
5 жыл бұрын
Pleas3 subscribe my channel for more such projects
@joyceyik4706
5 жыл бұрын
How To Electronics yup, subscribe done :)
@shayanarshad5025
4 жыл бұрын
@@joyceyik4706 have u done this project?
@hemangichauhan1235
3 жыл бұрын
@@HowtoElectronics does this code work perfectly after following the shown steps? Bcoz I tried several similar codes but it isn't working
@pardeshiom6551
2 жыл бұрын
@@hemangichauhan1235 yes its not working
@shilpa____2024
3 жыл бұрын
Plzz i need step by step Circuit Connection
@vinayagamoorthy9507
4 жыл бұрын
Where is the link for source Code
@sw_a_ppy
3 жыл бұрын
Website is not responding
@HowtoElectronics
3 жыл бұрын
Its working
@saarapaudel5679
3 жыл бұрын
Cloud u please help me out? Its showin' error as " in function 'void esp_8266()': ".
@milanhirani5120
3 жыл бұрын
You can solve this error?
@munjarlinkon2961
5 жыл бұрын
i am getting data in serial monitor but i am unable to get the data in thingspeak what am i missing can you help me?
@HowtoElectronics
5 жыл бұрын
Make sure your nodemcu gets connected to wifi.
@kunaltattu47
5 жыл бұрын
@@HowtoElectronics how to check it
@amirahnasuhasamsuri1734
4 жыл бұрын
@@HowtoElectronics how to check it sir :(
@vrushikashah6862
3 жыл бұрын
Problem solved ??
@iesuji
9 ай бұрын
If anyone doing this please note RS,EN pin is need to exchange, also LCD connect like this D7=2 ,D6=3,D5=4,D4=5. If needed please use trimmer for contrast setting. TQ
@AnkitKumar-sl6fm
5 ай бұрын
Can you clarify what to do with enable pin
@iesuji
5 ай бұрын
@@AnkitKumar-sl6fm Means enable pin( EN) and RS connect vice versa,
@AnkitKumar-sl6fm
5 ай бұрын
I think rst pin is not connecting anywhere, right?
@iesuji
5 ай бұрын
@@AnkitKumar-sl6fm Do ckt dgm as it is but exchange rs, en pins thats it
@AnkitKumar-sl6fm
5 ай бұрын
Thanku... And what about wifi connection. Is it correct
@sheetaltewary5006
5 жыл бұрын
I followed every step given in the video, on my serial monitor the "Get/Update api is also being shown" but on thingspeak there is no data record. I have updated ssid, password and api too. what else should i do?
@samirmahir3375
5 жыл бұрын
Same here
@maishebl4141
4 жыл бұрын
Me too
@sushantrimal3080
4 жыл бұрын
Hey, did you fix the problem?
@sushantrimal3080
4 жыл бұрын
Did you fix the problem?
@gangadharv8166
2 жыл бұрын
@@sushantrimal3080 how explain
@user-rm5pn1cj9m
8 ай бұрын
Sir i need a Arduino code
@vrushikashah6862
3 жыл бұрын
Sir I'm unable 2 display data on ThinkSpeak can u plz help me out ?
@AnkitKumar-sl6fm
5 ай бұрын
Have you got anything
@shazlinamohdsazuki3656
11 ай бұрын
Can we use arduino nano?
@MotiveMorsels14
4 ай бұрын
yes
@ronitpathak7848
2 жыл бұрын
Sir I want report of this project
@poojitashripathi3146
2 жыл бұрын
While uploading the code I m getting error something like this fatalerror failed to connect ESP8266 timed out, how to solve this problem? Waiting for the reply
@selmar2177
2 жыл бұрын
Same problem
@sunilkumar-qu5bd
Жыл бұрын
Hey are u solved ur problem iam also getting same problem can you please explain if u solved
Пікірлер: 404