Unknown Part After Screen Replacement on iPhone is not a problem after watching this video 😍😘
@1802198511
10 ай бұрын
Good video. This is actually not so difficult to do. My problem is, where do I get the tag on flex?!
@rewatechnology2008
10 ай бұрын
Hello, the REPART screen we sell comes with flex! pls check shop.rewa.tech/detail/repart-iphone-14-incell-screen-replacement.html?
@Serh7980
9 ай бұрын
Jewelry work!
@iset8871
10 ай бұрын
Smooth operator .... Lovely ...
@samppletronix3911
9 ай бұрын
Thank you for watching❤
@usman44593
9 ай бұрын
Thanks sir ❤❤
@purevnaymbayarjargal1987
8 ай бұрын
can i just take the ic from my old screen and put it in my new screen?
@KimoKimochii
10 ай бұрын
if you are transferring the IC why do you need to program truetone???? it’s already in the IC
@rewatechnology2008
10 ай бұрын
Aftermarket screens have its own IC to store True Tone data and this IC does not read True Tone data from the original touch IC. That's why you need to program True Tone before transplating the touch IC.
@KimoKimochii
10 ай бұрын
@@rewatechnology2008 Ahh i get it, that’s why there’s so little traces on the transplant flex it’s just enough to get rid of the messages
@razenevillarosa5183
6 ай бұрын
Question I still have Unknown parts on my iphone however if i try to update iOS 17.4 would there be an effect? (iphone 13Promax)
@pcwaves
7 ай бұрын
does this method till work on an iPhone 14 (Plus) with IOS 17? I just made such a repair and I get the unknown part, but true tone is available. the light dimming also doesn't work after display replacement
@jantestowy7884
10 ай бұрын
incell is great but for iphone 11 is max for use, newer models like 11pro/12/13/14 have got OLED screens so we need OLED screens with changeble IC field (balls made on field for faster chip switch) not IPS versions
@rewatechnology2008
10 ай бұрын
We have an OLED screens with changeable IC field.
@pravin4827
10 ай бұрын
Nice information thx 🎉
@sakilshaikh3602
10 ай бұрын
NAIS JOB SAR 👌👌👌👌
@muhammadsyamsularifin8295
2 ай бұрын
Hi Sir, How do I move the LCD IC to the original LCD from the iPhone Lock iCloud
@ProTechMobilePhone
Ай бұрын
check my shop on google or google maps protech mobile
@xRestore
9 ай бұрын
*good video*
@mobiledoctorz88
8 ай бұрын
Love U bro❤
@FlickEzraArtsTV
Ай бұрын
face id working?
@jonnybruh2799
9 ай бұрын
I have iphone 13 yesterday i replaced display on that before giving mobile to shopkeeper i said them i want both true tone n unkown part error they said yes !! But after repairing mobile they have given me my ic back saying we tried your ic with 2-3 display folder but it couldn’t read n error is still there can you help mee Dose ic gets corroupted or what?? 😢😢
@user-pn6pd5tp5n
9 ай бұрын
thi is will work on oem used screen mean the orjinal used one is it programable?
@ramonsoler6334
9 ай бұрын
why the i.c doenst go direct on the screen like the older phones?
@radinaw
7 ай бұрын
Hi @REWA Technology , can you tell where I can find the flex tag .thks
@ShaggyCZ
10 ай бұрын
Why does this display look like an LCD (shadows and thicker bezels) to me?
@brianredmond4919
6 ай бұрын
Think I’ll just stick to my day job as a brain surgeon.
@RahulKhatri-nk6xh
5 ай бұрын
do you have a supplier in india for purchasing the screen only
@zaheermobile4203
10 ай бұрын
Great job
@BMoreGoHard
2 ай бұрын
Great video, but know most people are not going to go through all of these steps.
@MrSpike5683
8 ай бұрын
You dont show where to buy the tag on flex
@uniquecrazy6581
10 ай бұрын
But face id not working after change Market screen
@henri2994
7 ай бұрын
Are there aftermarket screens that does not support programming? I bought new 12 pro display to replace the cracked one and i only want truetone back, i dont care about the genuine message, but when i start to program it then writing/burning fails every time.
@user-cb2wg1dm4y
5 ай бұрын
it will affect the battery performance if you don't have the true genuine message
@SamiullahLalZai
7 ай бұрын
Hey hi sir how to find tag in flax
@jonthecont
9 ай бұрын
can same be done for iphone 11 and xr? i hate doing transfer on there due to risk to damage new screen! this method reduces risk to screen damage
@rewatechnology2008
9 ай бұрын
Hi, there is no need to transfer original IC for iPhone XR. And for the iPhone 11, pls check our early video kzitem.info/news/bejne/y4psy3yvcJ6jZHY.
@remont_sotovih
10 ай бұрын
where can I buy these flex cables?
@rewatechnology2008
10 ай бұрын
May I know what kind of phone model you need to match the flex cable to? We can buy them from REWA shop, shop.rewa.tech/
@muhammadawaismushtaq145
10 ай бұрын
Sir I have a Question ..? The tag on flex is compulsory. If u don’t have tag on flex then how to remove important message
@rewatechnology2008
10 ай бұрын
Hi, sir, Not all models require flex to remove “Unknown Part” message, but the iPhone 14 requires it.
@kuntalraj26
3 ай бұрын
❤❤
@fiix-a-phone.official
10 ай бұрын
all after market Display not available pinout for tag on flex past ??
@rewatechnology2008
10 ай бұрын
Not all aftermarket screens for iPhones require a flex cable to remove the message, but the iPhone 14 does!
@alimobileexpert6692
10 ай бұрын
Hi sir After change Og ic from old lcd to new lcd true tone restore possible ?
@rewatechnology2008
9 ай бұрын
Hi, for aftermakert screen, true tone need to be restored by programmer.
@muhammadtonny214
9 ай бұрын
I have questions regarding screen replacement on iphone 14 and 14 plus. As we know, before we fixed anything we disconnect the battery on any iphone’s model. is it safe to do screen replacement without disconnecting the battery on 14/14 plus model? As we know we have to disassemble the back glass to reach the battery. Because i’ve fixed iphone 7 without disconnecting the battery like 5 years ago and it went completely dead. So i’m a bit scared. Please answer🙏🏻
@btlei
6 ай бұрын
No
@prebaned
12 күн бұрын
Yes
@bonbon_123
9 ай бұрын
do you offer calibration tools for m series macbook screen replacement too?
@rewatechnology2008
9 ай бұрын
No, we dont provide tools for MB calibration
@ronlevin2339
10 ай бұрын
Since when Apple started to put underfill under this IC ? I could re-ball it directly in iPhone 12
@rewatechnology2008
10 ай бұрын
The aftermarket screen shown in the video is pre-tinned and can be soldered directly. However, REWA technology recommends removing the tin first, and then re-planting the tin with mid-temperature tin to improve the success rate of soldering.
@victorbunac-px1ot
5 ай бұрын
were loc
@ifixpro.2851
10 ай бұрын
I like it 👍
@youngwonkim4998
10 ай бұрын
I think I'm going to be a scammer when I trade secondhand
@howardleones4856
Ай бұрын
Only if you say its brandnew 😂
@user-cb2wg1dm4y
5 ай бұрын
I am desperate, can someone tells me if there are still any other ways to fix it, when I no longer have the chip from the original display. I really want to get rid of the message because it makes my battery last much shorter.
@Codeth1986
Ай бұрын
this is simply incorrect information
@apk759
9 ай бұрын
We need that lines name
@yoitsgiook
10 ай бұрын
I got this message on my phone without ever replacing anything or opening it. The phone was directly from the apple store. Starting after a year. iPhone 12 Pro Max.
@ronlevin2339
10 ай бұрын
probably IC pads disconnected from a fall of the phone or water damage
@yoitsgiook
10 ай бұрын
@@ronlevin2339 it’s the camera. Says it’s camera is an unknown part. Guess that makes sense.
@ronlevin2339
10 ай бұрын
@@yoitsgiook maybe only connector got loose. Opening phone is needed of course
@rewatechnology2008
10 ай бұрын
Hi, it is recommended that you seek after-sales service at the store where you purchased the phone.
@yoitsgiook
10 ай бұрын
@@rewatechnology2008 it was at apple. I did, but at the time I couldn’t turn the phone in, needed to do a more recent backup. I was just more pointing out that this happens without changing parts.
@usamaansari7087
10 ай бұрын
Market have 13 Pro lcd ?
@rewatechnology2008
10 ай бұрын
It's coming out soon. We're looking at late November, early December.
That looks great! One question: would it be possible to connect the cleaned IC directly to the tin on the tag on flex without reballing it (only tin removal and cleaning) or is that discouraged because fresh works better or what might be the reason?
@rewatechnology2008
9 ай бұрын
After removing the tin, adding mid-temperature solder will increase the chances of success.
@nikitazaycev8636
7 ай бұрын
For a small 3x3 ball chip this sometimes works. But this ic is just too big, you dont want that margin of error (if the balls are different size then there is a risk the ic wont sit properly). The stencils are really cheap, so make sure you buy them in bulk and never ever try to skip this step. Worst case scenario the balls may bridge and cause a short, possibly damaging the motherboard. You really dont want this to happen on a 1tb 15 pro max while the client is waiting nearby haha
@angelandoh-brew3536
10 ай бұрын
Please reply to emails and comments. Thank you
@mohit.kunjir
10 ай бұрын
I bet the apple execs are cursing rewa right now😅
@Fixitmobiles
10 ай бұрын
First like and comment❤
@brandoncole795
10 ай бұрын
Same for the X series ?
@rewatechnology2008
10 ай бұрын
The X series don't have "Unknown part" message problem.
@brandoncole795
10 ай бұрын
Thank you for a reply on this. @@rewatechnology2008
@kowen7734
7 ай бұрын
太菜了这个水平,实际上我们都是直接把ic移过去,不用外挂排线,写个原彩就好了,而且做完很漂亮。
@user-cb2wg1dm4y
5 ай бұрын
請問沒有原本螢幕的ic是不是就沒救了
@kowen7734
5 ай бұрын
@@user-cb2wg1dm4y 售后可以付费换屏,价格和市场的拆机屏差不多其实。
@billtsit9347
10 ай бұрын
Very clean and scientic work,butt tell me something,if we don't change the chip, beyond the message, will we have any other screen functionality problems???
@mclp993
10 ай бұрын
You wont
@rewatechnology2008
10 ай бұрын
Hi, It's just the message problem, it doesn't affect the use.
@AdamsCraftingTable
9 ай бұрын
@@rewatechnology2008doesn't it ruins the auto brightness and true tone functionality?
@user-cb2wg1dm4y
5 ай бұрын
@@rewatechnology2008 my battery actually become much weaker. go to sleep with 50% power and wake up without doing anything in between and the next day it has only 25% left.
Пікірлер: 94