Today we will be fixing the charging port on my iPhone 7 Plus. In this case the port did charge, but it would not vibrate. After replacing the port, it would vibrate.
Required tools-
Tri-point - Y000
Phillips - PH000 (or JIS - J000)
Pentalobe - P2
iPhone Standoff Bit (not required, makes the job easier)
Flat blade of some sort
Heat
Patience.
Check out the RWR Discord! - / discord
Support the channel via Patreon! - / realworldreview
Toolkit that works for this repair (affiliate link) - amzn.to/2TY9fBD
Toolkit that I recommend and reviewed (affiliate link) - amzn.to/2EqCvvv
Toolkit that is closest to the one I use for all my repairs (affiliate link) - amzn.to/2H4duIr
The glue that I recommend using (I use the B6000 at 50ml, but B7000/E6000 work as well) (affiliate link) - amzn.to/2GY2cVL
Clamps I recommend with the glue (affiliate link) - amzn.to/2T8opHn
Double sided adhesive I recommend (affiliate link) - amzn.to/2U2eQqv
Dual Temperature Heating "Thing" (Heat “Gum”) (affiliate link) - amzn.to/3hzTUUs
The best type of razor blades (buy 100+ cause they’re low cost and fragile[don’t pry with these!!!]) (affiliate link) - amzn.to/2YE4W17
Playing Cards for easy adhesive cutting (affiliate link) - amzn.to/2JTBJf6
Part can be found here (affiliates)-
Black (For Jet/Matte Black) - amzn.to/3QmnGhq or amzn.to/3QHrWJI
White (For Gold, Silver, and Rose Gold) - amzn.to/3u2wcdR
What else should I replace? Want more iPhone 7 Plus videos? Let me know on here or on Twitter / mattofrwr .
Also happy birthday to me!
Негізгі бет Ғылым және технология iPhone 7 Plus Charging Port Replacement (Fix All Your Charging Issues!)
Пікірлер: 347