Absolute bad ass studs. Great steel mechanics and brave. Thank you for your profession.
@stevenewald9971
8 жыл бұрын
this is awesome man I have nothing but respect for you guys. I am Local 46 reinforcing ironworker in NYC.
@carpediem4290
3 жыл бұрын
Respect always for hard and dangerous work...Maybe we don't consider enough worthy.
@Mr.ResidentEvilXfiles
4 жыл бұрын
Man this is soo freaking badass, hopefully I become a successful ironworker one day.
@michaelbradford4444
2 ай бұрын
That's how connecting is supposed to look!
@tanataotengahere5978
2 жыл бұрын
Awesome vid...fond memories along with me mates..for we were A Team of iron workers (kiwi breed..rigger/boilie welder)'tuu-meke' 🦾.. though no harnesses bak-den.. safety though was a priority..as in All Mahi.. kaapai presente e hoa ✌️ Kia ora 🙏 thnx Jen's Ulven 👍
@hajiahmadgss2010
5 жыл бұрын
Hallo good morning my friends how are you today thank you very much for videos everyday from haji ahmad gss jeddah saudi arabia
@JerryKernn
2 жыл бұрын
That cantilever made me pucker up for sure
@KROYOWON
8 жыл бұрын
yo props for filming this and props for your skills as a ironworker, super cool youre posting this i wish more people would go pro their work, thanks.
@raybarbourjr.7456
8 жыл бұрын
Amazing Work! Keep it up!
@gramkrackermikeboss9593
6 жыл бұрын
Crane opp is a badass flying that steal, and my hats off to you guys men everyone of um💪🏋🏋🏋🏋I'm a concrete carpenter I work next to rod Buster's every day. I work on s tilt up crew we pick pannels some upwords of around 50'000 pounds with a crawler crane. Not near as bad ass as this😋🍻🍻👍💪
@ProjectArson
8 жыл бұрын
This is something else :D. Thanks for sharing this :)
@pcranebmw
6 жыл бұрын
you earn every dollar man. good job.
@waleswideman1
9 жыл бұрын
liked and shared
@manolitaespineira8930
Жыл бұрын
MY RESPECT FOR THIS WORKS ⭐⭐⭐⭐⭐💝💛💙💖🧡❤💝💛💙💖🧡❤💝💛💙💖🧡❤👍👍
@americopa1956
6 жыл бұрын
That's fucking amazing. I want to train for this! 👍
@getredytagetredy
6 жыл бұрын
Setting spandrel steel for the pour...Just another days work...
@jeffflanagan2814
5 жыл бұрын
Are you guys setting from the ground or a work floor?
@iaranda1985
3 жыл бұрын
Just pause it at 2:40. Dont look down...
@JensUlven
3 жыл бұрын
Is that what I said?
@mickmegarry4151
5 жыл бұрын
Why are the bolts only hand tight
@gaucho69gaucho71
5 жыл бұрын
E se um parafuso ou porca daquelas soltas em cima da viga escapa e cai no olho de um transeunte na rua lá de baixo?
@biglo9889
6 жыл бұрын
I have some questions, what happens after you hand screw those bolts in? Does someone tighten them up more securely? Also what are those long steel things for?
@simpleman7446
5 жыл бұрын
Two connecting bolts with a full nut is all you need when you make a connection, bolt up comes behind finishing the bolt out of the connection.those long steel things is a sleever bar used for leverage and helps with control of prying in steel 30 in. Otc or 36in klein bar for bigger iron anything bigger than that you need a come along
@Youbet3562
5 жыл бұрын
Really Nicetry two bolts or 50%. “Anything bigger and you need a come-a-long”? 😂 not if you know how to use your tools!
@flagkdsa180
7 жыл бұрын
what happens if they drop a hammer? it would be like a small bomb when it hits the sidewalk from that height
@brydongraham9472
3 жыл бұрын
Are you new? Why did it take you so long to make a bolt?
@JensUlven
3 жыл бұрын
Brand new. The hardest part of making bolts is filing the threads precisely so the nut will go on.
@getredytagetredy
6 жыл бұрын
Been looking for White Chief long gauntlet gloves for a awhile...Who has them?...Lucky the glove man?lol...
@Youbet3562
5 жыл бұрын
Like watching paint dry! Who put these snails in the air??? They should have a mandatory training in L.A. 433.
@MitzvosGolem1
5 жыл бұрын
Keith Ortiz west coast putz
@Youbet3562
5 жыл бұрын
😂😂😂
@JensUlven
5 жыл бұрын
You post one?
@In_Rem
6 жыл бұрын
though your go pro fish eye lens shows curvature there is none
@ethansmith2713
5 жыл бұрын
Nope don’t even start no just no
@dennisholliday886
5 жыл бұрын
Wow this is a safety violation not using the shackle on nylon use wire nylon cut easy where’s OSHA
@brentbarnhart5827
5 жыл бұрын
WHY do I watch these videos... holy living hell. Please quit walking around your making my stomach flip.
@Youbet3562
5 жыл бұрын
Not my thing. But you can educate yourself by checking out paulie433 to see some of how we do it.
@mattharper588
7 жыл бұрын
I cannot believe you are using those kevlar chockers to connect iron nylons are for women
@JensUlven
7 жыл бұрын
Hahaha! Should have been a 3/8 with a wrap with the bent plate on a piece that weighed under 100lbs! Way more gooder!
@simpleman7446
5 жыл бұрын
Nylons dont kink useful in rigging to a degree i prolly would have run a 6'half inch on a straight pull with a shackle through that center hole just to be safe.. Ive seen w4's w6's come out the 3/8 due to not enough weight causing not enough bite...nylons perform best up there with grey and black Real rigging..get you somee 50 ton shackles 20 ton chain falls pneumatic then u really doin something...pipe is another tricky bastard..good times chasin the hook.. Nothing like it
@Youbet3562
5 жыл бұрын
Nylons are for women? You clearly never done any big iron jobs! The biggest iron is always down with nylons. But to put it on bread with bent plate is ridiculous. 3/8”s with a wrap unless you’re hanging a cantilever over the street, then shackle in.
@drunkmike9943
5 жыл бұрын
@@Youbet3562 You never use nylons on structural steel because the sharp corners will cut them seen it happen many times maby not on this tiny iron these guys are hanging but its just good practice never to use. If you are doing heavy rigging on a paper machine or something were some cantilever beams weigh right under 100,000 you only use nylons because you don't want to risk any damage to the equipment that a wire would do. I have never come across a cantilever beam that you would have to choke or basket they always have pad eyes or eye bolts on top witch would obviously be rigged with a shackle and a nylon on the over head crane on separate hooks on a strait pull.
@drunkmike9943
5 жыл бұрын
@@Youbet3562 LOL You clearly can't read dumb ass. clearly said they are rigged from the top SMH
@VADERNATION
9 жыл бұрын
Why were you putting one bolt per connection.
@JensUlven
9 жыл бұрын
The bolt up gang follows us and stuffs bolts. Smaller iron gets one a side to speed things up. Thanks for watching
@89turbodave
8 жыл бұрын
+Jens Ulven I tip my hat to you sir, better you than me, im scared when I have to get on my garage!!!! damn
@DaBank
8 жыл бұрын
GOD FORBID YOU FEEL OFF THE BEAM. ARE YOU WEARING A HARNEST. WHAT KEEPS YOU FROM FALLING?
@abelabresm
7 жыл бұрын
Are replacing the bolts or they just add the rest......?
@drunkmike9943
5 жыл бұрын
bad connecting should be 2 bolts each side that's union trained iron workers for ya smh
@In_Rem
6 жыл бұрын
Earth is flat and motionless or the Ironworkers would not be walking on the top flange
@drunkmike9943
5 жыл бұрын
Why is it commercial construction or maybe its just union construction is so lax when it comes to proper training and safety??? Industrial construction every tool must have a lanyard so its impossible to drop, Always use wire chokers on iron never use endless nylon or polyester chokers on iron , Always use softeners, Always use shackles it only makes it easier on the connectors and choker never comes off the hook, The guy two floors below flagging the crane is a big no no one of the connectors should have a radio flagging the crane other wise there is a delay in the signal to the crane operator and a lot of shit can go wrong in that short amount of time. That's just a few things you guys are doing wrong and are some of the BASIC things you learn coming up as a NON union Iron Worker other wise you guys are doing a decent job on that little iron would like to see how you do on some heavy industrial iron were you will run in to girter beams weighing 60,000 lbs and you can walk in the web of the beams.
@drunkmike9943
5 жыл бұрын
@@Youbet3562 yep union trash never been to the big leagues.
@Youbet3562
5 жыл бұрын
drunk mike What a Joke!! Name one Job that was non-union that is reputable! You can’t, because they’re all union!
@drunkmike9943
5 жыл бұрын
@@Youbet3562 Dude you have no clue. Reputable LOL its easy when you have one crew of 10 guys doing the iron on the whole job and the combined workforce on the job is 100 guys maby a few more, maby to be "reputable". Lets see how "reputable" your union is when they get on a job where the iron depot alone has 150 crews with up to 12 guys on each and trying to work around 13,000 workers in other crafts SMH. That's what its like where I just came from the US Mega Project the biggest Industrial Project in the Western Hemisphere Non Union of course since there is no union with the man power or "SKILLED" workforce to man a job of that size. LOL you haven't even set foot in the real world yet LOL the biggest job a union is doing right now has 5'000 workers and are being supported and bailed out by a non union company CB&I/McDermott with all the pre fabed Iron, Pipe, Modular components eta.....and is $28 billion over budget and theres still about 3 more years of work SMH why don't you go get a taste of that and help your worthless union brothers out and turn that job around so it will be "reputable" for the union LMAO.
@bryanchannell7715
5 жыл бұрын
Bro we cant force companys to buy every single rigging tool and lanyards or nobody would ever afford ironwork, I come from the south and it's so cheap here on nonunion workers die, so as little no the best rigging isn't going to kill anyone
@bryanchannell7715
5 жыл бұрын
@@drunkmike9943 well buddy that's ur decision to do the work of 2 or 10 guys I used to and for shit pay, we do all the best jobs and all the decent money, union is amazing bro I've worked falcon stadium,Google, st Pete one, mines and chemical plants, airports, stadiums omg I hate nonunion jobs they suck ass
@manolitaespineira8930
Жыл бұрын
VERY,VERY NICE JOB AND PEOPLE. ⭐⭐⭐⭐⭐👍👍👍👍👍👍💖🧡❤💝💛💙💖🧡❤💝💛💙💖🧡❤💝💛💙💖🧡❤
Пікірлер: 71