Thanks for stopping by and checking out the video! A cool new tool added to the shop to work on bases for my model kits. What tool or tools are you looking to add to your shop?
@krzysztofmathews738
7 ай бұрын
A good and thorough review. Not a bad tool, but it sounds like there are a lot of things that could honestly be improved. Thank you!
@HobbyLinkInternational
7 ай бұрын
Definitely can use some redesign to make it a better tool :) thanks for stopping by and checking out the video.
@bobkilmer697
Ай бұрын
The sanding disc turns counterclockwise. I sand against the left side of the disc where the work piece is pushed down against the table rather than up and the dust is drawn down into where the vacuum is drawing air from the bottom left of the disk. Also, i tend to use the miter guage the other way. As for squaring up the table, use a square or other angle setting device. It's not a precision tool, but it removes material and it's very handy within it's range of applicability.
@MetalMania3DTV-TAS-AUS
7 ай бұрын
Being wanting 1 of these, not only for my hobby but also for jobs around the house, ok back to watching 👀Cheers 🍻🍻🇦🇺🤝🇺🇲👍
@HobbyLinkInternational
7 ай бұрын
If you are going to get one for serious work I would look at something better than Ryobi :)
It will definitely serve my hobby purposes. But still on the lookout for a simular Rigid tool.
@travisweeks7819
7 ай бұрын
Wow that looks amazing
@HobbyLinkInternational
7 ай бұрын
Thanks :)
@Jferriera5894
5 ай бұрын
Thankyou! I wanted to put a slightly higher grit belt on it and could not figure it out using the instructions!
@HobbyLinkInternational
5 ай бұрын
I am glad the video was helpful. Thank you for stopping by and checking out the video.
@DarksouIjah
7 ай бұрын
Ryobi is my preferred tool company. Great review. Do more of these if you can. Also it’s pronounced Ree-Obi not Rye Obi.
@HobbyLinkInternational
7 ай бұрын
Rigid is definitely mine because they last forever. If I get more new tools I will do more. By the way here is an official RYEobi commercial ;) lol kzitem.info/news/bejne/wp2frXWhj2qGh5gsi=YXTEyjN1bgONyVdV
@DarksouIjah
7 ай бұрын
@@HobbyLinkInternational lol.. This is the official Ryobi channel. kzitem.info/news/bejne/x2mltnaAjXednag
@HobbyLinkInternational
7 ай бұрын
@DarksouIjah lol guess it can be said either way. Like many other words. They can't even make up their mind on their official channel and their commercials.
@DarksouIjah
7 ай бұрын
@@HobbyLinkInternational lol Fair point. We can consider this a draw.
@HobbyLinkInternational
7 ай бұрын
@@DarksouIjah next up Tamiya vs Tamiya haha
@kulugo-04
4 ай бұрын
Great review! This is what I needed, thanks for your time making this video.
@HobbyLinkInternational
4 ай бұрын
Thank you very much 😊
@BrailleScale
6 ай бұрын
I'm a big Ridgid fan as well, I know some of their zero options are less than perfect, but some of these designs could definitely be improved. And the instructions booklet sounds like an afterthought, wow! Hope it at least gets the job done for you Kenny 👍🏻
@HobbyLinkInternational
6 ай бұрын
Thanks brother! So far so good for hobby needs. As an everyday workhorse I wouldn't use it
@wadesmith9483
4 ай бұрын
Actually you can get a perfect zero setting up the disc sanding table. Check with mini speed square against sanding disc… that way 45 degrees will automatically be accurate too
@HobbyLinkInternational
4 ай бұрын
thank you!
@CP-mb7ly
7 ай бұрын
Good video, but I wouldn't buy it from Ryobi. These are basically all made in the same factory in China and rebranded. Get the cheapest one and it won't be any different.
@HobbyLinkInternational
7 ай бұрын
Thanks for stopping by. Ryobi definitely isn't my first or second choice. The unit I bought is really only good for the small hobby related items I will be doing. Any serious woodworking would need a much better machine than this one.
@wadesmith9483
4 ай бұрын
The zero mark on the disc table is zero degrees in relation to the sanding disc not a level indicator. So again, use square to touch table and disc simultaneously to achieve perfect zero. I only beat this dead horse because you keep commenting about how inaccurate it is and how displeased you are. Happy sanding
@HobbyLinkInternational
4 ай бұрын
Thanks for the info as you see I am a noob at it and not using it for anything professional just sanding down small things for model bases.
@nemoatlantis7148
7 ай бұрын
look generic, oem to me.
@HobbyLinkInternational
7 ай бұрын
Very generic and not powerful at all. Barely push on the belt and it slows down :( But good enough for my hobby use. Thank you for stopping by and commenting really appreciate it.
Пікірлер: 33