I.had one didnt like bottom metal mine made lots of noise so i sold it got a savage 110 ultra light in.6.5.prc like it alot better
@ReviewThisThing
8 ай бұрын
I’ve heard good things about the 110 Ultralight - so many options, so little time 😊
@James-ou5co
2 ай бұрын
Why you are always reviewing Foreign made rifles? Turkish made Mossberg, Spanish made Bergara! Despite knowing the fact that it copied Remington 700. Why don't you review an original USA made Remarms Remington. They are making great rifles now. Please get a new Remington 700 and review it. This B14 is a Piece of crap period. Many of my friends had terrible experience with it. It's just pure hype and fake paid reviews. Proud Remington 700 owner.
@ericbrooks250
10 ай бұрын
my crest in 6.5 creedmoor would not group better than 2 inches, match load did 3 inches, removed action from stock and screws were not evenly or accurately torqued, removed very rough paint build up at action contact points. properly and evenly retorqued action screws and now getting 0.5 tp 0.8 inch groups with 4 different factory loads. my b14 hmr shoots just as good.
@ReviewThisThing
10 ай бұрын
Thank you for that information! That’s very helpful.
@brianperiso674
7 ай бұрын
Just picked up my Bergara crest in 7prc with carbon barrel. Fit and feel are fantastic! Now for a scope.
@ReviewThisThing
7 ай бұрын
😍 I need that.
@edstettin6799
5 ай бұрын
Mine just arrived. I have not picked it up yet. What is the minimum pull weight on your Trigger? It’s not advertised anywhere and I’m very curious. Thank you.
@foonus406
5 ай бұрын
Can't wait for them to put out a barreled action in 7PRC for the premiere line. Would throw it into a XRS chassis that is proven to take the recoil. Went with the HMR Premiere in 300PRC and found the stock needed a lot of modification to work with the recoil of that chambering - it may work fine for a lesser recoil cartridge but not so much with the magnums. Mine was binding up on the rear action screw due to a crooked drilled back pillar and there was slop in the recoil lug (pocket was oversized) that you could see marring the side of it. Shoots great (1 inch groups at 300 yards) now after the pillars were redrilled, whole action was bedded, and front of the stock was reinforced with carbon fiber. In hindsight I would get the Barreled action and an MDT Chassis. It will end up being lighter and more adjustable in the end without needing to do all of the custom work. Bergara is known for their barrels.. Stick with the barrel and go with a someone that is known for their chassis. That's my experience with the platform.
@smurfaka
3 сағат бұрын
@@edstettin6799 mine is 1.1kg but thats not the carbon barreled one
@eggbert191
10 ай бұрын
Mdt makes 3 round aics magazines that will give you a more flush fit.
@ReviewThisThing
10 ай бұрын
For 6.5 PRC?
@ashlynphillips
10 ай бұрын
I love my 308 crest. I get the best groups with the 150gr Remington core lokt psp. The size, weight, and trigger pull are a killer combo for me. Great gun.
@@ashlynphillips When you press the charging handle down when loading a bullet, is it smooth all the way or is there like a two step press downwards? Or is it only my rifle
@foonus406
5 ай бұрын
Can't wait for them to put out a barreled action in 7PRC for the premiere line. Would throw it into a XRS chassis that is proven to take the recoil. Went with the HMR Premiere in 300PRC and found the stock needed a lot of modification to work with the recoil of that chambering - it may work fine for a lesser recoil cartridge but not so much with the magnums. Mine was binding up on the rear action screw due to a crooked drilled back pillar and there was slop in the recoil lug (pocket was oversized) that you could see marring the side of it. Shoots great (1 inch groups at 300 yards) now after the pillars were redrilled, whole action was bedded, and front of the stock was reinforced with carbon fiber. In hindsight I would get the Barreled action and an MDT Chassis. It will end up being lighter and more adjustable in the end without needing to do all of the custom work. Bergara is known for their barrels.. Stick with the barrel and go with a someone that is known for their chassis. Not a fan of the noisy Accurate Mag magazines in any platform I run. Unfortunately its not interchangeable with a standard AICS pattern magazine so I'm stuck with it. Had to shim the sides of it with electric tape to keep it from rattling around when being carried on a hunt since modifying magazines is Illegal in Canada.
@ReviewThisThing
5 ай бұрын
That’s fantastic information! Thank you.
@SolarStoic
2 ай бұрын
If only that annoying popping sound during the video could be removed… anyway Bergara is a sub-par tool. My experience with it is abysmal.
@ReviewThisThing
2 ай бұрын
Which sound?
@zoranpuhalo7941
2 ай бұрын
Greeting Do you happen to know the length of the magazine (action) 6.5prc bergare crest
@ReviewThisThing
2 ай бұрын
My sources tell me it’s a short action.
@gerardcorreale7760
24 күн бұрын
since the b14 ridge is more the common mans bergara how about a video of b14 ridge 300 prc
@ReviewThisThing
24 күн бұрын
Hmmmm. I have a Ridge in 6.5 CM 😁
@pikeman0357
10 ай бұрын
Thanks for the review but I already purchased the b14 wilderness ridge 308!!! Dang it!!! Lol love the channel...
@ReviewThisThing
10 ай бұрын
Haha. You will NOT be disappointed! Thank you so much for your support!
@stevenwalker9013
10 ай бұрын
I was looking at the wilderness but a lot of people were complaining about the weight. The crest is supposed to be almost 3lbs lighter but with a 2 inch shorter barrel. I’m not sure which I’m going to get in 7mm prc. I like a 24” for long range target shooting, but I have seen videos of the crest banging steel at 1200 yards. So that 22” inch barrel may be fine
@ReviewThisThing
10 ай бұрын
@@stevenwalker9013 the HMR is definitely close to 3 lbs heavier than the Crest. I haven't shot a 7PRC Crest, but the 6.5 PRC is pretty ridiculous! Let us know what you decide on and what you think.
@ajsomp
8 ай бұрын
The new crest carbon fixed what I griped about on the crest. It loses a lb with the carbon barrel, a m5 bottom metal so you can either have the DBM or hinged floor plate - something I appreciate for a true hunting rig. My only hold up with Bergara recently is the QC between models. They seem to either shoot lasers or not group at all. Hoping they fix that moving forwert
@ReviewThisThing
8 ай бұрын
That would be interesting to see as well.
@davier05
8 күн бұрын
I bought the new Bergara elevate with carbon barrel in 6,5 PRC. My first shoots are hole in hole at 100m. I hope is the same 300 and more…🙏🏼
@ReviewThisThing
8 күн бұрын
SWEET! What country are you in?
@davier05
8 күн бұрын
@@ReviewThisThing I’m from France. South Alpes mountains
@ReviewThisThing
8 күн бұрын
@davier05 very nice! I knew the Elevate was a European offering. Thanks for watching!
@smurfaka
16 сағат бұрын
When you press the charging handle down when loading a bullet, is it smooth all the way or is there like a two step press downwards? Or is it only my rifle
@ReviewThisThing
13 сағат бұрын
Hmmm…I don’t remember. We had to send that one back to them, so we don’t still have it.
@smurfaka
3 сағат бұрын
@@ReviewThisThing what was the issue?
@ReviewThisThing
20 минут бұрын
@smurfaka no issue. We were just borrowing it.
@phild9813
10 ай бұрын
Thank you for including how the safety works in relation to the action and trigger. I prefer a bolt that locks while on safety so that it doesn’t come open in the brush or crawling on a stalk, or just packed on my side. The bolt lift’s accidentally fairly regularly with my Ruger American, though I like the rifle otherwise. Three position safeties are best, but i tolerate the 2 position with locking bolt on the Tikka because I like the rifle so much otherwise.
@ReviewThisThing
10 ай бұрын
I’m glad it was helpful! Thank you for watching!
@stephenhiott5630
2 ай бұрын
which Leupold cross slot base did you use?
@ReviewThisThing
2 ай бұрын
It was this one. cabelas.rockporch.com/prdlink/cGTeiTgzJw
@paulmerritt5318
5 ай бұрын
I would like to see your review of the new savage impulse. What are your thoughts?
@ReviewThisThing
5 ай бұрын
May have to see if we can get ahold of one.
@paulmerritt5318
5 ай бұрын
@@ReviewThisThing I am looking to purchase a new target/ hunting rifle. I am not a competitive shooter, I just enjoy getting out with friends, my thoughts are on 6.5 prc, 7mm prc, 300 prc, I like heavy barrels, I was intrigued with the impulse, Bergara HMR pro, Tika T3
@ReviewThisThing
5 ай бұрын
@paulmerritt5318 we did a video on the HMR (not pro). It’s worth a look if you don’t mind a heavy gun. kzitem.info/news/bejne/saSu04GMsZyEipwsi=0mVy1R4e6K--tW9-
@jsol4477
10 ай бұрын
If you want flush fit MDT has them! I use them on my Crest 308. The stock fits me just great and fully loaded with ammo and scope is under 8lbs.
@ReviewThisThing
10 ай бұрын
Okay! I’ll have to check them out. Thank you! What scope are you using?
@ReviewThisThing
10 ай бұрын
Doesn’t look like there’s a flush fit for 6.5 PRC.
@jsol4477
10 ай бұрын
@@ReviewThisThing swapping between Leupold VXR 3-9 and VX6Hd 3-18x44, On my good days I can shoot 3/4 moa with factory match ammo.
@ReviewThisThing
10 ай бұрын
@jsol4477 very nice!
@jsol4477
10 ай бұрын
@@ReviewThisThing oops forgot that you were reviewing the 6.5, sorry.
@Hatch61
10 ай бұрын
Looks like a really nice gun, and will surely get the job done. Thanks for the review, I hope you all had a nice Thanksgiving, be well and God bless.
@ReviewThisThing
10 ай бұрын
We did. I hope yours was great, too! Going any adventures?
@davidwarren3433
8 ай бұрын
Depending on the caliber your crest is, MDT makes AICS magazines and with the right caliber, they are flush 3 rounders. My Crest 6.5CM is flush mag with MTD's 3-rd mag.
@ReviewThisThing
8 ай бұрын
That’s great to know! We’ll have to try that.
@liverpool6380
10 ай бұрын
Can you review Browning XBolt SPR 20inch barrel 7PRC 🇺🇸🥃
@ReviewThisThing
10 ай бұрын
Oooh. I would love to!
@TOMMACMILLAN-fw6oh
9 ай бұрын
I'm about 95% sure all Bergara's take AICS mags, MDT makes 3 round AICS mags that should fit flush or almost flush Dear !!
@ReviewThisThing
9 ай бұрын
Thank you!
@mr.mr.3301
10 ай бұрын
If you are a 308 fanboy you will see Bergaras and CVAs be so so when it comes to accuracy. I’ve watched many reviews and wonder why that is.
@ReviewThisThing
10 ай бұрын
Interesting question.
@The_Draque
10 ай бұрын
Probably ammo. There's a ton of cheap crappy 308/7.62 ammo out there. Also alot of cheap ammo is 7.62x51 ammo NOT .308 I have found that .308 ammo shoots way better than 7.62 ammo and I will nowadays sort out 7.62 brass and only reload/shoot .308 stamped brass in my bolt actions
@ReviewThisThing
10 ай бұрын
@The_Draque very true
@frankcesaro6778
9 ай бұрын
Just bought my first CVA Cascade short barrel (18") in .308. With the first box of ammo I purchased. It shot a .70 3 shot group. I'd say this gun is not a so so shooter. These CVA's are supposed to be entry level compared to the Bergara B14. But they all have the great Bergara barrels. I'm now sold on anything Bergara produces.
@ReviewThisThing
9 ай бұрын
VERY nice! Congrats on getting a great gun. I’m glad you love it!
@phild9813
10 ай бұрын
Great video and review! One thing you could add to your rifle reviews is degrees of bolt lift. I’m a fan of rifles like X-bolts, Americans, and Tikkas that have 60-75 degrees of lift, whereas rifles like vanguards and 700s have 90 degree lifts. I think the Bergaras are 90? 90s are usually easier to lift, but your hands end up into the scope, and the lower lifts are opposite.
@ReviewThisThing
10 ай бұрын
Ah. That’s a great point. I’m pretty sure it’s a 90, but if not, I’ll update here.
@RamonCajal-hm7ur
Ай бұрын
I bought this in 6.5 Creedmoor. It’s really fantastic and great on the range and hunting. The trigger is adjustable and I found the lightest setting works great at range (~2lbs), but a bit heavier is better in the woods when gloves and adrenaline are added.
@ReviewThisThing
Ай бұрын
Sweet! Thanks for the info.
@paultrower
4 ай бұрын
Hi there can you tell me the speeds you were getting from the precision hunter eldx 143 grains , I have the same gun but with the 20” barrel feel I have lost a bit
@ReviewThisThing
4 ай бұрын
This one is 20” as well. I said it wrong. I think we talk a lot more about speeds in this video - kzitem.info/news/bejne/lYKdqJx8Zp-Ll3Ysi=48H1tCpWdFKgVl35
@randallwhite9015
10 ай бұрын
I bought the 2020 redline,in 308. Absolutely amazing,20" barrel and trigger -tec trigger. Shoots so well. You or anyone would love this rifle. Good job.
@ReviewThisThing
10 ай бұрын
Ooh. Good to know!
@RivinaR
6 ай бұрын
I have the Bergara B14 HMR in 6.5 Creedmoor, love it.
@ReviewThisThing
6 ай бұрын
YES!
@DadHominem
Ай бұрын
Great review! Thank you.
@ReviewThisThing
Ай бұрын
I appreciate it! Thank you for watching!
@charlesmullins3238
10 ай бұрын
Love to let y’all fire this older fn special police heavy barrel .308…Macmillan stock..bedded mod70 action and base from factory…got my 2nd gen 3x15 viper in lowest rings possible and made a foam cheek riser with black 100mph tape to match the all black and give it that marine corps look just in black..it and my prc waypoint I can’t get enough of as they both shoot well under 1” with my loads but fn will with factory 168gmm…happy holidays to y’all.. Matt
@ReviewThisThing
10 ай бұрын
Holy smokes! That sounds awesome. Same to you, Sir!
@edstettin6799
5 ай бұрын
What is the minimum pull weight on that trigger?
@ReviewThisThing
5 ай бұрын
From what I gather, it can go as low as 1.5 pounds.
@thomas35718
10 ай бұрын
What velocities are you getting with the factory loads?
@ReviewThisThing
10 ай бұрын
I had to go back and watch a couple of the other videos we made to see for sure. It shoots pretty consistently 125-175fps slower than the box's listed speed. With that 20" barrel, at least 100fps is to be expected. And then, of course, manufacturer's testing is done is perfect environments. Here is the main video I'm referencing. kzitem.info/news/bejne/lYKdqJx8Zp-Ll3Ysi=E0j1HW6xz7FVV6e-
@1valg
5 ай бұрын
I will never own a Bergara. Their quality is just not good enough. They have many issues due to poor QC and manufacturing. After all they are just a hyped up Remington clone. No thanks.
@ReviewThisThing
5 ай бұрын
Which ones have you had trouble with?
@1valg
5 ай бұрын
@@ReviewThisThing The B14R and the B14HMR. Never again.
@ReviewThisThing
5 ай бұрын
@1valg 👍🏻👍🏻
@jmadar51
10 ай бұрын
Very informative never heard of the gun. But you explained everything about it good looking gun
@ReviewThisThing
10 ай бұрын
Thank you! It’s pretty sweet.
@Dani-hl3xu
9 ай бұрын
My 308 crest had a hard time shooting sub moa at first. I was kinda disappointed until after about 100 rounds the groups tightened down more and more. Now it shoots half inch groups with nosler e tip and about 3/4 moa with any load i ever shot. It seems to like 150grain bullets. Cheap norma tactical 147 gets me 3/4 inch groups on a bad day and half inch on a good day. Can’t complain!
@ReviewThisThing
9 ай бұрын
Ahhh. That’s good to know. Thank you!
@smurfaka
3 сағат бұрын
@@Dani-hl3xu When you press the charging handle down when loading a bullet, is it smooth all the way or is there like a two step press downwards? Or is it only my rifle
@ReviewThisThing
19 минут бұрын
I’m interested to know this
@CCRider5312
10 ай бұрын
Bergara makes the best barrels hands down 👍🏼
@ReviewThisThing
10 ай бұрын
Love them!
@MonkeLmao2025
10 ай бұрын
Can you review the Sellier and Bellot 165 grain 308 lead free?
@ReviewThisThing
10 ай бұрын
Hmmm…I don’t have any of that, but maybe if I can find some.
@MonkeLmao2025
10 ай бұрын
Alright, thanks@@ReviewThisThing
@ReviewThisThing
10 ай бұрын
@UkrainianPig2025-Dee 👍🏻👍🏻
@charlesmullins3238
10 ай бұрын
Damn if I don’t want that black stallion
@ReviewThisThing
10 ай бұрын
It’s super nice.
@charlesmullins3238
10 ай бұрын
And be damn if you don’t have the lht I’m wantin on it..! That’s what’s goin on my waypoint..$100 Walmart simmons 4.5x14x40 from 99 shot 1 hole groups and hit a 20oz lid@254yrds with my 95gr 6.5prc v max goin 3625fps….it deletes jugs
@ReviewThisThing
10 ай бұрын
@charlesmullins3238 😂 DANG. That’s awesome!
@micalthomas
10 ай бұрын
I just ordered one in 7mm PRC a week ago, getting very excited. Do you know which screws the scope rail takes? 6-48 or 8-40? I am trying to go ahead and get all my accessories lined up for when it finally gets here.
@ReviewThisThing
10 ай бұрын
I’m pretty sure this is the rail we used. amzn.to/40UcOfi
@micalthomas
10 ай бұрын
@@ReviewThisThing thank you!!
@ReviewThisThing
10 ай бұрын
@micalthomas let us know what you think!
@ReviewThisThing
10 ай бұрын
Ours is a 6.5 PRC, so it’s a short action - not sure about the 7PRC.
@nebraskaman8247
10 ай бұрын
The b14 uses 6-48. If you’re using a pic rail get one with a recoil lug. If you’ll also epoxy bed it, which is easy, you can kiss goodbye any/all scope issues you’ve ever had. Considering you mount the scope in the rings properly.
@jacklewis3444
9 ай бұрын
Lol pretty sure they just discontinued it
@ReviewThisThing
9 ай бұрын
Really?!?
@ReviewThisThing
9 ай бұрын
My sources tell me otherwise.
@jacklewis3444
9 ай бұрын
@@ReviewThisThing I didn’t see it on their website yesterday when I looked
@ReviewThisThing
9 ай бұрын
@jacklewis3444 ah. I just looked. It’s still there. Under B-14 Series
@donwilson350
10 ай бұрын
Right off the bat. I don't care what model or make of the gun. If the magazine doesn't set flush. I don't like it
@ReviewThisThing
10 ай бұрын
I feel that.
@scottsquires6186
10 ай бұрын
34 dollars for a 3 round mag it’s not a big deal
@ReviewThisThing
10 ай бұрын
Where did you find that?
@mr.mr.3301
10 ай бұрын
Still not for me. I prefer a Teika and for the price I can get a Teika and add a carbon stock, and the only thing missing is a threaded barrel and those are very lightweight. About a pound less. You should get a regular teal light in 308 and review that.
@ReviewThisThing
10 ай бұрын
It could be coming next year. Ya never know. Stay tuned.
@mr.mr.3301
10 ай бұрын
@@ReviewThisThing you should do a build project. Start with a basic tikka compact. Then have it cut and threaded for a suppressor. Try groups before and after. You could get several videos out of that project.
@ReviewThisThing
10 ай бұрын
@mr.mr.3301 that’s a great idea. I think there’s a Tikka that’s already threaded 🤔
@mr.mr.3301
10 ай бұрын
@@ReviewThisThing there is. They are more expensive. Have a thicker barrel profile and are “22 inches.
Пікірлер: 144