Finally, someone showing the fan noise. Thank you.
@kyleranney
28 күн бұрын
No one else covers the fact that it doesn't work out of the box.
@ODHunte
25 күн бұрын
I measured and talked about this before this video on my channel 👌🏿👍🏿..
@ODHunte
25 күн бұрын
@@kyleranney well not really, I spoke about this in my video on the transmitter 👍🏿
@9php
26 күн бұрын
im returning mine because it gets uncomfortably hot, and the fan noise can be very loud even on low mode. Furthermore the battery life isnt great if you're not using massive npf batteries. If you want to power it by usb c, you need to make sure your power supply can output 9.2v!
@enriquesubias
29 күн бұрын
Finally someone mentioning camera and gimbal control, thanks!
@RawmanFilm
29 күн бұрын
We have it on Set rn. PRICE is amazing. Video is good, latency is workable. Broadcast mode is nice.
@kwangtran4129
29 күн бұрын
i love cvp keep up the good work
@johnclay7644
29 күн бұрын
informative video thanks CVP
@Redm0ndFilms
29 күн бұрын
Would love to see you guys do a video like this for the new Accsoon Cineview 2 SDI. Looks like very solid competitor to this
@Codywpreston
29 күн бұрын
I'm so surprised they didn't add a 2 Pin Lemo for power instead of USB-C in case you don't want to use a NPF..
@kyleranney
28 күн бұрын
There's a compnay in the UK that makes a NPF dummy that has 2 pin in and through. Cine Parts
@TheTechnoPilot
29 күн бұрын
A fabulously comprehesive review! Thank you for properly addressing latency unlike how many don't!
29 күн бұрын
i think the Achilles' heel of many transmission systems are npf batteries. You will see that especially when you tried the DJI highbright monitor with npf and their own batteries. Especially cheap npf, take forever to charge and have bad performace. On the High Bright monitor together with the dji handles this can even lead to glitches when the npfs charge is under 40% I really hope DJI would make npf compatible batteries but with the fast charging and awesome weight and power ratio of their own wb37
@anilanfilmproductions
29 күн бұрын
Just be cautious with your fingers! My one got uncomfortably hot to the touch after a short while. It wasn’t even transmitting. Just powered on and in the process of setting it up indoors. Fan set to default. Using a touchscreen pen incase I want to change settings on the device itself, rather than on a phone.
@MaximoJoshua
29 күн бұрын
would love a compare and contrast with hollyland pyro...they both seem to be in the same price bracket, with some similar features, and I am curious which would be the recommendation, or under what circumstances you might choose one over the other.
@Nujola
29 күн бұрын
Add the cineview to the fight
@thenerdshow
29 күн бұрын
I will never use Hollyland again after our cosmo 600 disasters.
@DarkTrapStudio
29 күн бұрын
Hey CVP just want to share kind feedback : You need to get your audio game right, the audio is harsh.
@nguyeninhucthang662
27 күн бұрын
I think he need sth like pop filter to cut air noise
@DarkTrapStudio
24 күн бұрын
@@nguyeninhucthang662 Maybe for the sibbilance but it wouldn't change a lot
@tonyboz9218
12 күн бұрын
No UVC output on receiver? Hopefully on next firmware update. Hollyland pyro s/h have this feature and it's great for a quick and dirty output to a laptop at 1080/30 MJPEG for Zoom, Teams , Vmix, OBS, etc .....
@TDCIYB77
29 күн бұрын
For someone who had never used a TX system: Is this latency good enough for focus pulling?
@stuartswindellcampoy8483
24 күн бұрын
Was making a review about them still havent edited it but i did mention the fan, i cant believe nobody mentioned the fan noise the moment i heard mune i was like how has nobody mentuoned this its so loud. Im not surprised though mostnof the people who got it prerelease just said good things, which tbh um happy with mine i dont think the fan noise does affect me yet we'll see if it does at some point
@Nujola
29 күн бұрын
Who is going to be the first to put the dji against the pyro and the cineview
@deviland05
12 күн бұрын
DJI should develop overlay picture function to matching the shot before I will buy it. Not now.
@CeenMedia
14 күн бұрын
Is this good for a simple live sports broadcasting setup to capture wireless cameras?
@VickersDoorter
12 күн бұрын
1:12 I hate that in the UK we're bound by CE, so the transmission range appears 33% lower vs FCC. I hope a hack appears for this.
@letamendi
29 күн бұрын
So the DJI SDR transmitter doesn’t work/communicate with the DJI Focus pro at all? Or it just doesn’t power the unit? Curious because I was planning on getting the Focus pro and using the SDR combo to wirelessly connect to pull focus and use batteries to power the DJI combo.
@justusriechers2900
29 күн бұрын
Great video! Do you know which metadata are transmitted? Just the record flag start / stop or informations like iso, wb, ires etc.?
@stucooke3983
29 күн бұрын
If you used an HDMI split to go to the monitor and tx from camera, would that help with latency?
@FocalpointproductionsNet
27 күн бұрын
Great video!!
@NTC_CABLE_VISION
20 күн бұрын
Hi can it transmit audio video or video only?
@mikaelwalker3327
27 күн бұрын
There are absolutely no competitors in terms of metadata-transmit-capable solutions at this price range, good job DJI.
@ShortStoryInspiration
29 күн бұрын
Can you recommend a iPad cage power setup with the dji sdr? Ideally to hand to clients with handles or table stand, almost like a director monitor, thanks
@NigelBurton-NZ
27 күн бұрын
Accsoon cages
@nickxc
29 күн бұрын
I'm curious to see if teradek is going to properly respond to all these newer transmission systems. They could ignore hollyland but not dji. My teradeks almost never get used now as 9 times out of 10 im grabbing the dji transmission system.
@cokebottles6919
29 күн бұрын
yeah, I've switched to DJI 90% of the time. I can't remember the last time I used a Teradek and didn't have some sort of signal issue. DJI isn't flawless, but other than the occasional restart to get signal back, they've been much more reliable.
@nickxc
29 күн бұрын
@@cokebottles6919 yeah I'm incredibly close to selling all of my bolt 500s to potentially get another DJI. It's hard to pull the trigger though because they're such an industry standard.
@UncommonManFromEarth
29 күн бұрын
The biggest question I have as a DIT is : what metadatas the DJI transmitters are supporting and for which cameras? (TC, Clipname, Rec Flag...) Do you have any experience with that particular aspect ?
@cokebottles6919
29 күн бұрын
@@UncommonManFromEarth I can only speak for the higher end DJI video transmission, not this new SD version. TC for sure, clipname and record flag are usually fed into the the SDI output via the camera when I've used it... I'm no DIT, but first AC's and the 2-man audio teams I've worked with haven't brought up any issues.
@nickxc
29 күн бұрын
@@UncommonManFromEarth I haven't tested it on the highbright monitor, but the standard receiver supports all standard metadata including lens data, timecode, and clip name. The standalone receiver came out later so I wouldn't be surprised if DJI didnt include metadata in the monitor.
@staples7762
29 күн бұрын
Hey Jake, maybe i missed it but can it do sdi loop out?
@anilanfilmproductions
29 күн бұрын
Nope, HDMI and SDI in on the transmitter and HDMI and SDI out the receiver. No loops sadly.
@staples7762
28 күн бұрын
@@anilanfilmproductions bummer,, but thanks for the answer!
@johnnyweissmuller5838
28 күн бұрын
I couldnt care less if the range is 200 meters, if i can get a steady signal within 3-5 meters im ok, this isnt the case with cheaper wifi aystems
@frannyfranman
27 күн бұрын
No active track is so annoying
@hannamdong
24 күн бұрын
Stupid plastic without ACTIVE TRACKING function
@joshpark868
29 күн бұрын
Also using the low latency mode is achieved by lowering the data rate of the video feed. So low latency mode results in severe artifacts so its not good for focus pulling at all.
@JerryCook919
28 күн бұрын
Low Latency mode of DJI SDR Transmission is basically a way to add extra frames to a video without messing with the original frame rate or cutting down on quality. So, if your video is coming in at less than 60 frames per second, like 24, 25, or 50, turning on Low Latency will bump it up to 60 frames to cut down on delay. But if your video is already at 60 frames per second or higher, flipping this feature on or off won't make a difference.
Пікірлер: 52