jONSBO geting some recognition on this channel! What a nice case. I always loved their unibody design for a lot of their cases. Great video, guys!
@Roybaer679
2 жыл бұрын
Really beautiful IKEA paper bin clone :D if I wouldn't already have the Meshlicious, I would go for the Jonsbo. I'm not sure though if it would fit in my backpack like the Mesh does
@ashfaqadib8085
2 жыл бұрын
Just what I thought xD I if you put it on the floor people would definitely thrown things in it
@lance153
Жыл бұрын
may I know what backpack you use? I'am thinking of getting the Meshilicious too and I was wondering if it will fit inside my oakley bag.
@masterdftw4983
2 жыл бұрын
The fact that this takes an ATX PSU and there is still room for cables is a huge win for this case. Im getting it!
@joeldiramon8538
2 жыл бұрын
when can you order it?
@Redhawk_CS
2 жыл бұрын
@@joeldiramon8538 Newegg?
@CThunder2000
2 жыл бұрын
The Jonsbo VR3 is a beautiful case. Like you said, it is a bit bigger than some of the other cases, but that extra size gives the builder some extra flexibility. Plus it's not that massively big. I also like that you don't have to sacrifice storage options when using large videocards. Cheers from NYC.
@chiromedic1127
Жыл бұрын
As someone looking to do a new build I was dead set on the meshilicous but started looking at other idea and I’m leaning more towards this case as I have big hands and struggle with smaller cases and I’m lazy with cable management
@hipperooni383
2 жыл бұрын
Can't help but think this case looks like a desk bin
@shaunvalencia2644
2 жыл бұрын
In the bin!
@FaridRudiansyah
2 жыл бұрын
A very expensive trash, inside.
@E82N55
2 жыл бұрын
Great for the trash components that’ll get thrown in there
@telostia
Жыл бұрын
Nah. More like a white speaker!
@packgoat4580
8 ай бұрын
Very nice bin. RGB bin!
@ESNN20
2 жыл бұрын
For those curious and I didn't see it mentioned in the video, the case is 19.3 liters compared to the meshlicious at 14.6 liters. The price is around 300usd roughly for me in the US either off Newegg 3rd party seller in China or Aliexpress, both of which is only for the 3.0 riser cable so it cost even more with the 4.0 riser. I may be a bit bias since my current case is the meshlicious but I don't think this case is better personally. For the extra storage, if you have an SFX PSU and move it to the top most slot, you can fit 2-3 2.5" drives under it. The slate case AQ which is currently on it's first run and preorders still open looks more compelling tbh.
@dandyND
6 ай бұрын
I know this is really old but that price is ridiculously expensive, I guess there is no official partner to distribute the case in US. The case only cost about 110usd in my place
@NathanRM101
2 жыл бұрын
Looks awesome, it does solve some of the issues I am having with my meshy at the moment - sometimes the slight size compromise is worth it! Keep it the awesome vids man!
@michaelthompson9798
2 жыл бұрын
Sweet looking pc case 🥰🤩🤯👍! I use a Jonsbo itx case (about 50% the size of the VR3) and it’s an awesome lil build 🥰❤😍! Jonsbo make some truely amazing, well built and budget friendly pc cases for the itx market and are deserving of more coverage. Great review Nick 🥰👍. I would love to see more Jonsbo cases reviewed here 😇🧐😍
@dopemojo327
11 ай бұрын
I just bought a custom gaming PC from a local shop that was built in this case... after getting it home and learning more about it I'm glad I decided on this and not a commercial machine.
@StopperJJ
2 жыл бұрын
I was looking for a well ventilated case for a possible media/HTPC and this might be the winner for me. Thanks for the great review. Love your videos.
@Icebr34ker
2 жыл бұрын
Thanks for the video! Pretty nice case and build. Would love to see something about the Jonsbo d30/d40 as well. Great work! Very informative
@Deviantsoundz
2 жыл бұрын
Jonsbo has been making some really nice cases.
@andrewc20
2 жыл бұрын
beautiful case ! i really like it ! it is kinda hard to get jonsbo cases in my region too ! the sliding mechanism and feet under the frame are nicely done ! keep up the excellent work !! love the purple color scheme to go with this white build !
@chokes26
2 жыл бұрын
Mesh cases for the win. Top notch B-Roll today, has that little extra spice. Love it
@sh00kac
4 ай бұрын
Very very beatiful review and light\video work, i bought their VR4 bigger model half blindly but i am happy to read that its good build quality as well, i am sure its same for VR4!
@dylanguerrero8053
2 жыл бұрын
How did i miss that gundam GPU in your other vids. That thing's GORGEOUS. Also the VR3 solves my biggest problem with the Mesh, the display cables.
@BVG71RU
2 жыл бұрын
Только вчера увидел и захотел этот корпус себе, а сегодня ты уже его собрал. Спасибо брат, люблю тебя!
@evolve8085
2 жыл бұрын
Nice video, after seeing those 3 cases side by side I am glad I picked the Mesh.
@joeymcjoeysalot6596
2 жыл бұрын
Really dig it. I'd consider it for sure if I wasn't already rocking the meshilicious. Love cases that have removable frames/shells. Definitely on the larger itx size, but the desk footprint is still pretty small.
@10ee
2 жыл бұрын
Great review. Very similar to the Meshlicious, but has the extra features and size to make it more build-friendly. I agree on your conclusion that if Jonsbo cases were more widely available, they would give a certain other vendor a run for their money. I've often wanted to get one, but in North America it's a P.I.T.A. to get one.
@kell7689
2 жыл бұрын
that rounded corner looks real nice
@jwaye89
2 жыл бұрын
The Jonsbo case looks awesome, fantastic video fams
@fredmeyer369
Жыл бұрын
Thank you for doing this video - I never even consider this case until I saw this video and breakdown. After weighing a few options, I ended up buying it because of the price being cheaper than the SSUPD and a lot of the review points you gave!
@GoosemanSG
2 жыл бұрын
Another awesome review! Thank you Nick!
@josephmurphy1994
2 жыл бұрын
Intro music was so on point :) Good job !
@Housestationlive
2 жыл бұрын
i'm so admirative of jonsbo. i wasn't aware of the existence of that brand one year ago and it's already my second build using their cases. too bad it's not aliminium for that price.
@_Murky_
2 жыл бұрын
music, cinematics, editing 😍 Killing it as always. Do these mesh cases draw in more dust relative to cases that may have 3 or 4 sides open?
@makiwa
2 жыл бұрын
I like it, I would happily have one! Thanks.
@hervenoel8956
2 жыл бұрын
So waiting for the air cooled one. I'm looking for the D30
@yojig_
2 жыл бұрын
great case! ordered this one today
@maxabillon
2 жыл бұрын
Love it, Thanks, Love the front I/0 made simple, & with a PCIE 4.0 Riser saving £80 odd but the Type C is going to be limited on Speed due to the joint connection to the 20 pin USB 3.0 connection So I may have to Mod a native type C cable to the frame. Got this Case delivered today, I Can just fit an Arctic freezer II AIO 240mm 38cm thick Rad with the 25cm fans mounted in the front. Build Finished, Arctic freezer II AIO 240mm Rad hoses/barbs can only go down bottom due to the case layout/frame, 8pin CPU & 24PIN Cable are under the motherboard & PCI-E Cable going into the hole below the motherboard tray .
@badhusband1902
2 жыл бұрын
also worth checking out is jonsbo d30 & d40, they are big nr200s with matx + atx psu support
@ztryfe
2 жыл бұрын
Are you seeing abnormal temperatures on that card when mounting it IO side up? I've read it's a potential problem for cases like this or the xtia xproto, where heatpipes won't perform well when the cards are facing up, leading to overheating issues. A simple way to test would be to flip the case on its side (perhaps with some makeshift feet to allow for airflow). Fantastic videos !
@EvernooBE
2 жыл бұрын
There is very little information online about this topic, probably because hardly any cases use this orientation. I really hope to get to the bottom of this myself because I REALLY like the esthetics of this case.
@Zombie101
Жыл бұрын
fairly sure heatpipes dont care what orientation they are in
@ztryfe
Жыл бұрын
@@Zombie101 they do! I have the same Strix card model on this video kzitem.info/news/bejne/w4uHzn5tfXZqlqw. Can confirm the card overheats when the IO shield is facing up, I run an xproto L and the flip module is needed to have the IO downside.
@Zombie101
Жыл бұрын
@@ztryfe ohh 😮 so the 30series only. Won't affect me then! But good spot
@r00k917
2 жыл бұрын
Awesome build! might actually consider this on my ITX Build. Will check the local SRP once available on my country.
@Arashmickey
2 жыл бұрын
Jonsbo, alright! Sweet build. Glad you used a 280mm AIO to check if it actually supports one comfortably. Love the pre-folded riser cable. Quite often Jonsbo has the interesting ideas but less-than-perfect execution, glad to see they flipped the script for once. The VR2 looked good and I liked the concept at the time, but was merely okay. Double glass, but also tinted pretty dark, weird use of space... not great. The VR3 is pretty awesome by comparison. Now I wonder if they'll make a combination of the VR2 and VR3, like a Jonsbo version of H1V1 but with less fire (or zombie virus?). I'd also love to see more of the D30 matx. We do get their cases here in Europe in various stores, and Caseking is their official EU outlet I believe. Their color variations don't always make it here though, and it takes a while for their stuff to show up.
@TheLoneWolf449
Жыл бұрын
I love everything about the cases design, but there is one flaw that causes me to turn to meshilicious. It only supports up to a 325mm card. The new 4090s are going to exceed that on air cooled cards. Meshilicious will fit a 336mm card, so the suprim 4090 will fit snuggly.
@simplybananas
2 жыл бұрын
I like the fact you can use an atx psu.
@constantinosschinas4503
Жыл бұрын
Great production quality and content. Would be nice to see it with an ATX PSU!
@glennkamers
2 жыл бұрын
Nice review however it would help to have a little darker set background to see the case better. Keep up the good work.
@Mark3rz101
2 жыл бұрын
I currently have the Mesh. I'm considering this case due to the slightly bigger size. It has been a pain dealing with the GPU cables at the bottom and the size of high end gpu's had made it hard to easily swap TUF/Gigabyte/3 slot gpus in. Plus it's a better value, at the moment at least!
@paulmichaelsabapathy9672
2 жыл бұрын
Wonder if anyone could make this type of case where the gpu position is swapped with the aio. That way when its on your desk,you can see your mobo,rbg ram and side profile of gpu on one side. Hehe. Wanna see hard earned parts together instead of gpu hiding behind. Btw thanks GearSeekers for the great content. Love em white builds❤
@GearSeekers
2 жыл бұрын
There is an Antec case called the Striker that you can front mount a GPU ;)
@Kizzster
2 жыл бұрын
Meshlicious has better tempratures somehow, 10 lower degrees on GPU and 6 degrees lower on the CPU. I'm guessing the holes in Jonsbo outer casing are the reason as they look very small?
@Trgn
Жыл бұрын
This case sucks. There 2 fatal flaws. One is the aio pump is higher than the radiator's top point, trapping bubble in pump. 2nd is thermal performance. There is no place to mount normal 120cm exhaust fan at top or back, except for the tiny 5cm gap at the back. Even with 240cm aio blowing air out at front, Gpu at load heats up the case ambient real fast that the USB port to wireless mouse and keyboard got so hot they lost connection. The whole metal case and metal top lid heated up, it's not viable for gaming without removing the top lid. Probly also why they made it so. This is probly even worse for gpu cards that blow heat directly out the back into the metal top lid.
@Kizzster
Жыл бұрын
@@Trgn I bought an Xproto-L with a flip mount
@VoiDukkha
2 жыл бұрын
top quality video as always!
@scatterforce
2 жыл бұрын
Word of caution: not all GPUs can be pointed upwards. Many cards will run hotter when they are pointed up.
@dimitriid
2 жыл бұрын
Interesting case: I actually wouldn't mind a bit of a different use case hear me out: this already has 2 slots for 2.5" hard drives and the rare part is that it also has 2 slots for 3.5" hdds but you can adapt those to take 4x 2.5" drives so that makes it up to 6 drives AND standard ATX board support. It's not the smallest of cases but it does look sleek so I actually could see using this for a home server: you can likely fit a 5950x with a 240 AIO on the front, up to 64gb of ram, a smaller GPU mostly for the video decoding or better still a 10-25gb pci-e ethernet card, 6 2.5" drives which is not a lot but that's still 20 tb (1 drive can fail with ZFS) or better yet you can probably put about 12gb of 2.5" ssd space for super nice performance. This might not be the most convenient but unlike 1u solutions that can be configured similarly, this actually does look like it belongs in your office, living room, etc. And is probably very quiet.
@pethrowed1324
2 жыл бұрын
Great stuff. Love the Asus Gundam/Zeon stuff
@Weezedog
2 жыл бұрын
Meshlicious wins because of GPU orientation. With the GPU oriented in this case so that the GPU cables come out the top, the heatpipes don’t work properly so the GPU runs way hotter. Flip the case upside down so the GPU points downward and the GPU temps will drop 15-20C in just a few seconds.
@Reflectivityy
11 ай бұрын
Will this affect a 3080 founders?
@kiko1764
Жыл бұрын
I would like to use an arctic 280mm aio in this case but dont know if i could fit it because of the thickness dimension of the radiator, im using an itx board btw if that makes any difference.
@TheRealFenwick
6 ай бұрын
Probably going to grab this. Wanted the meshroom s v2 but trying to find it or get it to Australia is a nightmare
@encaged314
Жыл бұрын
I've been considering changing the chassis my itx rig is in to something new to change things up a bit. I was hard set on the SSUPD until watching this. This is $50 USD cheaper through Newegg and comes with a Gen4 riser
@dareka9425
2 жыл бұрын
I like how the mesh looks. In a way you're two cases in one. Pull out the frame and you have an open air case.
@EvernooBE
2 жыл бұрын
Would a thicker AIO like the Arctic Liquid Freezer II (280) Fit? I really like the minimalistic design and it would look awesome on my desk. Glad the full mesh designs are getting more available in ITX format. Larger cases still seem to swear by a TG side panel which I don't like. Will the mesh block dust as well as a filter on the intake?
@janechu23
2 жыл бұрын
having the gpu port pointing up will make gpu temperature higher compare to a bottom port. but this case much better in terms of looks but in cooling meshlicious is much better.
@27Zangle
Жыл бұрын
I am thinking about this case and then do a wood wrap on the top and bottom lid.
@Sumpula
2 жыл бұрын
Looks like the mesh will be an issue for the cpu thermals and possibly also gpu thermals when stressing the components for a longer time. Again comaring to the SSUPD the ssupd is almost perfectly see through while you can barely see through the mesh of the jonsbo. Also the top of the SSUPD is mesh so heat can escape that way too.
@gregoryhouse7613
2 жыл бұрын
Nice (and unexpected) review of Chinese case. Cudos.
@faiflowright01
2 жыл бұрын
Great vid. Could do with a smaller case. Have you tried the ZS A4? I heard it's local there in Australia. I was lucky to get one here in my country for cheap. It's also a sliding case. Sub 8L.
@goatee01
2 жыл бұрын
The irony with the sibilance in the MSI ad...
@Seiryns
Жыл бұрын
I feel there's too many things wrong with this build in the cooling area. There are better aios than the nzxt cooler since the fins are painted white and some other small things. I also think having the only fans in the case as a pull configuration where the air looks choked being so close to your cables. I also think some custom water cooling with a thinner radiator and lower spec hardware would benefit also. All in all cheers to the white asthetics and thanks for showcasing this new case.
@Phalaxis83
2 жыл бұрын
That's the opposite of a gronk PC. Noice!
@GlassPup
12 күн бұрын
I still like ATX Mobo with SFX PSU in Meshroom.
@RafitoOoO
2 жыл бұрын
Jonsbo has some great cases, a shame that it's harder to buy and on aliexpress the shipping is more expensive than the case lol
@cwfromlnj
2 жыл бұрын
$115 fir the case... $130 for the s/h... oof.
@jemerbautista
2 жыл бұрын
Awesome video as always. Where can I get ahold of this case ? 🤔
@FriENTlyFire
2 жыл бұрын
I have to say that I do like the wraparound mesh solution more than my meshlicious's fragile feeling snap-on panels, but I think that's where this thing's appeal ends for me in a head to head comparison. My meshi was still dead simple to build in and cable managed rather nicely (except for the bottom mounted SSD), I like the bottom IO for my displays more than top IO on this one, and I think it's a little bigger than necessary.
@CollectiveMindz
Жыл бұрын
You installed the radiator upside down, that won't last in the long run as air bubbles will collect in the cpu block long term reducing thermal capacity dramatically.
@pcfreak6
2 жыл бұрын
perfectooo... i love it
@mrbend
2 жыл бұрын
Do the Jonsbo V10. Mean Watercooling possibilities. And it looks amazing.
@rsg7221
Жыл бұрын
I love it!
@earthwormjim3
2 ай бұрын
Checking this on 2024. Question, were you able to check what's the cpu cooler limit?
@s-line7896
Жыл бұрын
What's better ? Phanteks Evolv Shift XT or Jonsbo VR3?
@michaelbernes2707
2 жыл бұрын
I really wish it's availabile locally
@pikipogo5253
6 ай бұрын
Checkout the Jonsbo C6! I havent seen a matx board build in a while
@coyotex850
2 жыл бұрын
with the added size i feel like they could've have made this adapt to an matx board.......missed oppurtunity imo
@speybondon
2 жыл бұрын
Thx for the video, but could you consider changing your background for a slightly darker tint when shooting a completely white case like this? My eyes are kind burned out by now und its really hard to make out any details of the case. thx again from germany :-)
@nameresu
6 ай бұрын
Hi. I did a quick search and you never revisited this case. Maybe another build in this? With ATX PSU, and more importantly, 4080 Super that fits. 12vhpwr connector bend is really bother me in this case. Is it possible to safely bend an adapter, or it is necessary to order a custom cable with angled connector?
@microtasker
2 жыл бұрын
Looks like it needs a sticker on it that says "Rheem" and put it in the backyard to heat the house.
@PaduszGaming
2 жыл бұрын
Hi nick! Could You please make a build in Be Quiet black 802 airflow case with NZXT RGB fans if possible? It looks great in my mind, im about to make some upgrades, and i would love to see how could it look before im gonna start messing around with it, Cheers!
@ni5ga
2 жыл бұрын
It’s actually a lot smaller than meshlicious because it supports a 325mm gpu but meshlicious supports up to 336mm in length and also it can support up to four slots and this just how much rtx 4090 would need and don’t forget the atx psu and use a silverstone psu 2050w so your ready for the future
@znoozi
2 жыл бұрын
oof that RAM bending from the AIO tubes...
@hauducnguyenvn
Жыл бұрын
Just a noob question, when you install the aio. What way of airflow you put it on. Intake or just suck out the hot air to the front?
@Housestationlive
2 жыл бұрын
i just purchased it on amazon.
@Dionyzos
2 жыл бұрын
Could you technically slide in the cage flipped so the GPU IO is facing down? Or just turn the case around? The temps should be WAY better in that orientation and that would be a dealbreaker for me if you couldn't.
@MCMonsterbuilder
10 ай бұрын
I have bought a meshilicious on ebay a few days ago but the seller hasn't posted it yet. If that seller is a scam I might be getting one of those as another option.
@michaelosmolski
Жыл бұрын
1 year on and I bought this case for a 5900x itx build. What a mistake. Build quality is ace BUT the SOLID lid on the case is a real heat trap not to mention the mesh holes are so small it's difficult for any hot air to escape the case. I do love the look of the case and it's overall design but the lid and the tiny mesh holes are a real deal breaker.
@lylegc01
2 жыл бұрын
I always LOL at that "spinning rust" comment. Where would you be without that Google "spinning rust" storage for your vids. ? 😉😂
@trevorbarney1796
Жыл бұрын
I think the Meshlicious is the better case for 2 reasons: the modular mobo tray and the vented top panel. Also from a personal opinion, since i was looking at the Meshlicious to do a custom loop, i dislike the placement of the top I/O here.
@icemage21k
2 жыл бұрын
the bends on the riser... my eyes!
@EpineCA
6 ай бұрын
What's wrong with using the 2 front fans as intake and creating positive air pressure?
@jGRite
2 жыл бұрын
They had me until it didn't have its own motherboard type C plug.
@luluismo
2 жыл бұрын
interesting, but compare to Meshlicious, in load avg it seems 5-10C degree more? I just check back your Meshlicious review. or the extra heat similar due to the choose of GPU and CPU?
@ajmatt
2 жыл бұрын
Seriously what is up with these ITX cases to offer excatly 32.5cm GPU clearence? I was expecting this one to offer at least 34 or 35cm considering the size. The next gen cards are defnitely going to be huge, hot and power hungry so this might rule out most of the 70ti and above class nvidia cards. I think I might have to go back to a mid tower for a GPU upgrade next gen. DIsappointed.
@Jenan_Tahnik
2 жыл бұрын
Why didn't you put the fans on the other side of the Rad? If you had RGD Fans, is that an option? Wondering if it was a choice or a limitation of the case.
@danielgallo299
2 жыл бұрын
Is this case going to be available in the U.S. market?
@pcnubi998
2 жыл бұрын
Just to build my first itx..but im start with lian li tu150
@vladdraculLV
Жыл бұрын
Where are the Displayport and HDMI video cables for the video card?
@qalih
2 жыл бұрын
Strange that the width is quite a bit more than the meshlicious but only fits 70mm height block.
@thepatrizioshow3246
2 жыл бұрын
7:26 the topmost part of the radiator is only slightly higher than the pump. Wouldn't it deteriorate the AIO in the long run?
@andriibezkrovnyi7215
Жыл бұрын
Hey guys, tell me please, do MSI RTX 4080 SUPRIM X (33.7cm length) fit in there?
@constantinosschinas4503
5 ай бұрын
Could this case be used with Corsair's ATX Shift PSU? (PSU cable at bottom, fan facing inside, ports up)
@KerminSR
2 жыл бұрын
Why the F is the algorithm pushing me down the small form factor rabbit hole? I was checking out Intel 12th gen upgrades 2 weeks ago, and now I'm looking at min/maxing my RTX 3090 in a 10 liter case with a custom loop.
Пікірлер: 221