That tug of war was an excellent representation of the extruder force. Thanks
@navycadet1
Жыл бұрын
Dude that is the most creative and awesome test ever
@LucasBuildsStuff
Жыл бұрын
Thanks! 😀
@MyBrothersMario
Жыл бұрын
Reminded me of Proper Printing's tug of war showdown where the Micro Swiss demolished everything including a Bondtech QR along with his own experimental design using timing belts to grip onto a larger section of filament. kzitem.info/news/bejne/kaCivWifr4V1nqQ
@LucasBuildsStuff
Жыл бұрын
Sweet!
@zdog90210
Жыл бұрын
Awesome video creative test! Can't wait to see more videos!
@LucasBuildsStuff
Жыл бұрын
Thank you! I'm excited to create more content!
@EnriqSandoval
4 ай бұрын
OH MAN....The soundtrack to this vid is awesome! I felt like I was watching Gladiator during the tug of war. Great touch.
@LucasBuildsStuff
4 ай бұрын
Thanks!
@corywarner
Жыл бұрын
Awesome review!
@LucasBuildsStuff
Жыл бұрын
Thanks, glad you liked it! 😃
@PETRevolution3D
Жыл бұрын
love the content... but get a better mic when recording your audio... please. other than that. great stuff! keep it up!
@LucasBuildsStuff
Жыл бұрын
Thanks! Definitely the plan for the next video 🙂
@Gunner0352
Жыл бұрын
Gantry should not sag just because an extruder moved to the other side. That is a side effect of not having tight enough rollers or misaligned rollers
@LucasBuildsStuff
Жыл бұрын
That's what I originally thought too! Thanks for watching!
@istayhighi1540
Жыл бұрын
Man I just got the ng in the mail today. Sadly I gotta wait 10 hours for my print to finish but so far I’m impressed by the quality of it.
@LucasBuildsStuff
Жыл бұрын
Any updates?
@istayhighi1540
Жыл бұрын
Yup broken heater block because I was clumsy and dropped it but got a new one in the mail today so I’ll have an update ina few hours hopefully 🤞
@LucasBuildsStuff
Жыл бұрын
Haha that sucks, hope round 2 works better!
@oldgrumpybatman4130
10 ай бұрын
I have the NG but let me say it's nothing but clogging issues and it's a real pain to take apart and put back together every time... so frustrating...
@LucasBuildsStuff
10 ай бұрын
Clogging sucks! I haven't had a single clog with the NG yet, are you sure the nozzles you're using are meeting the heat break?
@omegadeepblue1407
11 ай бұрын
i love this video
@Pdunns3D
Жыл бұрын
Hows it a shorter filament path than say the sprite pro that goes directly in in a similar way
@LucasBuildsStuff
Жыл бұрын
I'm pretty sure it's the distance between the gear and the nozzle but I'm not 100% sure I just ordered the sprite pro and guess we'll find out!
@capthowdy126
7 ай бұрын
well u just decided with direct drive im putting on one of my creality machines, not sure which one yet but a ng will be added to a ender 3, 3max, 5 or a aquila not sure which im going to put it on yet, ender 5 has a microswiss hotend already so that makes me want to lean in the other direction but one question, is the heat block an throat the same from the ng to the original all metal hotend or are they different. would be nice if all the parts where interchangeable.
@LucasBuildsStuff
7 ай бұрын
The NG comes with its own block and throat but I'm pretty sure the block is generic and the throat is unique 🤔
@txwombat7826
Жыл бұрын
Any-update on the jamming when loading filament? - I'm having the same issue
@LucasBuildsStuff
Жыл бұрын
I've been busy designing my next project and haven't printed much recently. Will start printing again soon, I'll keep you updated if I do!
@JimmysDIY
4 ай бұрын
Helpful but your comment re: filament going out on 1st Gen is wrong. Capricorn tube going to the hot end cut too short which is the reason it goes out. It is cut at an angle to sit between gears.
@LucasBuildsStuff
3 ай бұрын
Maybe, makes sense 🤔 thanks!
@mrinductionakagolddenboy5645
Жыл бұрын
Love the video .but man please fix the audio is terrible
@LucasBuildsStuff
Жыл бұрын
😂
@zdog90210
Жыл бұрын
Here's another one for the algorithm
@LucasBuildsStuff
Жыл бұрын
Thanks! 😂
@robertbobbitt8448
Жыл бұрын
The end to end height check is pointless due to single z drive
@LucasBuildsStuff
Жыл бұрын
Hey! I found a huge difference in print quality with dual z rods 🤔
@Dkizzle16
Жыл бұрын
This is the video I've been looking for! I had an all metal hotend from microswiss so it was cheaper to buy the older style when switching to dd. Been curious of the difference and what I am missing. Would be interested to see print quality comparison, but mostly that test you did was awesome. Could the original extruder lift the spool on its own if it wasn't attached to the NG? How strong is the microswiss extruder is essentially my question. It is clear the ng is extremely powerful in comparison
@LucasBuildsStuff
Жыл бұрын
Thanks! 😀 The way the pulleys were set up, initially each extruder would be lifting 1/2 the spool weight (approx. 500-600g). In my opinion it's not that the Original is very weak, it's that the NG is so powerful that it makes it look weak.
@omegadeepblue1407
7 ай бұрын
@@LucasBuildsStuff truth, i watched another video of an "extruder tournament" where various extruders like the Orbiter, the Sprite, Bondtech DDX and obviously the Micro Swiss NG compited. The NG ate all of their rivals.
@blue_beephang-glider5417
Ай бұрын
NO! 12 successes followed by infinite fault finding and disassembly assembling, searches on KZitem and forums. All return to the device not working in the same way... Removed and binned.
Пікірлер: 40