Cool video! Learning alot on my TTR125. I was gifted one that didn't run, and have been using your videos to help get her running.
@CameronNiemela
6 жыл бұрын
Awesome! Glad the videos have been helpful
@AntonioPerez-kk8cj
4 жыл бұрын
I just picked a 2005 TTR125 that's has been sitting in my mother in law's garage for 14 years. I'm glad I came across your channel. Im wondering where you get your parts from?
@bikeflippaztv8556
6 жыл бұрын
Lol the float wasn’t parralel to the bowl at all😂😂
@jansanagala8617
3 жыл бұрын
Close enought xd
@LandonLewis2244
Жыл бұрын
THANK YOU! I am a new subscriber and these videos are sooooooo helpful! and thank you som much for including the tools in the description!
@ucelo5913
6 жыл бұрын
Please don't stop doing this videos
@zyzzshavershian5690
6 жыл бұрын
Love your channel, i love seeing you giving life to mx bikes, it's really awesome! I'm gonna do your way of disassembling and checking all the parts (cleaning too),that way I'm gonna assemble it correctly! You are the best channel when it comes to dirt bikes, i love it, keep up uploading these interesting videos! Best of luck.
@frontlinemedia4270
6 жыл бұрын
Cameron, I used that chain before. Worst chain quality i ever used, stretched every time we ran the bike. We used it on a kx80, so maybe not as bad on tt.
@gabewilliams5993
6 жыл бұрын
Kx80 has a lot of power and hit to it. Makes sense it would stretch a mediocre chain rapidly. Especially if it’s exposed to extreme mud and grime and it’s ridden really hard like on an MX track. Lack of maintenance will also ruin a chain.
@danklovell8104
6 жыл бұрын
loving the projects bro, keep it up!
@matthewrobinson2391
2 жыл бұрын
What does the t hose on top connect to going towards the tank? Does it not connect to anything?
@alejandroucelo6348
6 жыл бұрын
Russia approves this channel 👍
@creedg2165
6 жыл бұрын
Every vid is the best. Love this ttr build. Do more pit bike builds in the future
@joet6990
6 жыл бұрын
9:46 bugged me so much, that was the last thing i liked dealing with when cleaning my bike or the carburetor. it always took me forever to get it on correct.
@HOTSHOT-ls1bc
6 жыл бұрын
YOU NEED TO START POWDER COATING STUFF AGAIN!!!!! would make for some great looking parts
@enniofolini8755
6 жыл бұрын
4:20 the look on his face lol
@louis2743
6 жыл бұрын
I would love that fender!
@jchalmers28jc18
6 жыл бұрын
Great vid again mate . Really informed. Could watch your vids for hours 🏍👍🏼
@CameronNiemela
6 жыл бұрын
Thanks!
@eeroerkintalo9858
6 жыл бұрын
Nice to see that you get a lot of positive feeback. ATM you have 147 likes and 0 dislikes which is awesome.
@jesstexanderson
2 ай бұрын
I'm bummed that there was no audio during the 1st part of the carb rebuild. That's the primary reason why I watched. Good information though. I'm needing to rebuild my daughter's 125
@tylerski8419
6 жыл бұрын
That magic trick though
@tyhackathorn2878
6 жыл бұрын
Thanks again for these videos like I said before I’m learning so much from you haha I just bought a Yamaha ttr 230 I’m 50 years old and riding with my 15 yr old son he rides a gas gas 300
@CameronNiemela
6 жыл бұрын
I appreciate you watching!
@zJasu
6 жыл бұрын
Did you oil the airfilter?
@MrTSM53
6 жыл бұрын
I always oil my airfilter with a specific airfilter oil. I even do it on my pitbikes and stuff
@tylerski8419
6 жыл бұрын
No toil air filters come pre oiled
@CameronNiemela
6 жыл бұрын
Pre oiled dawg
@laserinkcustomengravingjus76
Жыл бұрын
Any tips on removing that old needle valve set? Mine definitely isn’t just popping right out.
@jaceking1988
6 жыл бұрын
Can’t wait till tomorrow🤗
@screamingoreo
6 жыл бұрын
i love your videos keep up the amazing work
@jonnymillis1098
6 жыл бұрын
don't really want to put water in my tank, can i just use something else or does it need to be a certain amount of pressure? Great vids!
@FS-yn9fy
4 жыл бұрын
What a fantastic video thank you I just put my carb together
@timothyyeager7248
5 ай бұрын
Very informative video. Can you tell me what type of camera you used to make it? We need to video some manufacturing processes at work and need that kind of clarity.
@CameronNiemela
5 ай бұрын
Thank you. I used a canon 80D for this video
@b_mb4948
6 жыл бұрын
You gotta love them Viton-tipped needle valves...
@piotrwinkowski9231
3 жыл бұрын
Can You tell me what kind of mikuni model is it?
@astulbran673
6 жыл бұрын
Great job..
@ii_rottweilas_iips4849
3 жыл бұрын
What is that black hose he places on at 9:30?
@knownbarkert6153
3 жыл бұрын
My question too, mine doesn't have them and it concerns me lol
@armchaircritic9520
6 жыл бұрын
Sad to see the old Ronnie Mac front fender go... just take to the new one with a hand saw and she will be good to go. I have a wr250f its pretty sick. What do you guys (other subs) have?
@td5568
3 жыл бұрын
Can you please put a link on where to get the new float needle valve
@fixit2747
10 ай бұрын
Hey I have a Honda 125 it bogs when I take off fast but doesn't when I take off slow I cleaned carb jets set float as close as I could get it new spark plug set fuel screw 2 turns out and have gone in and out with that as well but no change anything else it could be.
@benni1215
6 жыл бұрын
The ttr is looking fresh !!!!
@crf1507
6 жыл бұрын
This guy is amazing!!!
@AngelGarcia_420
6 жыл бұрын
That exhaust is on its way!
@CameronNiemela
6 жыл бұрын
Thanks so much man! I really appreciate it and I'll put it to good use.
@EmaRC
4 жыл бұрын
Cameron, que función cumple la manguera que tiene una T al lado del cebador?
@purplepanda7075
4 жыл бұрын
Where do the carb hoses go from the T? Are they just to vent?
@DonnaTheGorash
Жыл бұрын
Hey where did you get the plastic covered?
@diojenesortiz5052
5 жыл бұрын
Cameron my nephew has a ttr125 and its always on high idle, we checked to see if it has the air mixture screw but it seems like its plugged up and the gas regulator screw is screwed all the way in, should he just buy a new carb for the bike.?
@jaydunsmore050897
6 жыл бұрын
What would u recommended for a mini project 2 stoke to work over the winter ?
@vanalstyne9834
6 жыл бұрын
Please tell me you used a compressor to dry the carb before you installed it.
@HybridEdits
6 жыл бұрын
Could you do a yz250 woods build next? Like buy a cheap project and build it i to a woods weapon. And make it look modern like a 2015? Would be insane.
@nicklovestrains1
5 жыл бұрын
Quick question...I lost the screw that holds down the plate that retains the seat. What size is it?
@Musalini-oq7bu
3 жыл бұрын
Cameron I need help my ttr 125 keeps bogging I cleaned the jets and the float looks spot on I put a new spark plug and I’m running out of ideas my fuel/air screw is at 3 full turns please help
@jessegrimm9274
6 жыл бұрын
Breaking stuff is always a blast!
@Fergdog4Ever
6 жыл бұрын
Where did you get the plastics, tires, carb kit from? Any links? Thank you so much, Sir. I’m learning from you and pulled apart my first carbs last night... thank you!
@CameronNiemela
6 жыл бұрын
I get all my parts from Rocky Mountain
@gurmeetsidhu7302
4 жыл бұрын
My float bowl feels loos when i just took off my carb i shaked it and it sounded like somthing was loose os this normal, now that i have if out im holding the carb likenit was onnthe bike and the float is just bottemed out is that also normal or shouldnit be stiffer
@owl1873
3 жыл бұрын
Cameron my man I have a question. I'm resembling my TTR 125 carb and on the air intake side of the carb there are two little jets one with a larger hole than the other. Which one is for the choke. Larger or smaller of the two. Im stuck .
@ryansolomon5083
5 жыл бұрын
Were was it leaking from (I know from the carb) ,is it from the gasket? Im having an over flow problem and I can seem to find the sweet spot for my floats it's like no matter how I adjust them it still over flows gas when I shut the engine off ,if I forget to use the shut off valve I'll have a puddle of gas right under my engine.
@jasonholbrook9954
6 жыл бұрын
at 9:27 in your video. Where do the hoses that T off the carb go, and what are they for? Please help!!
@nathanharland3375
6 жыл бұрын
Are you just running the stock jets?
@Jim.Frantzisson
3 жыл бұрын
It has the same carburettor as an xt125 but it doesn't have the carburettor heater andd thermo sensor
@boogiekush9391
3 жыл бұрын
Thank you !
@jrsproductions3
6 жыл бұрын
do you know what air filter you used? I have this exact bike and it doesn't even have the housing for a filter.
@CameronNiemela
6 жыл бұрын
It was a No Toil
@zackmunro6354
4 жыл бұрын
Where do you get your parts from currently building a ttr 125
@Abcd-hr9ot
6 жыл бұрын
ireland approves this lad
@HOTSHOT-ls1bc
6 жыл бұрын
Next you should get a crf150f or 230f it was my favorite bike and I liked it more than my Crf250r! It is a absolutely amazing bike other than the restrictions and the stupid soft forks but you can swap them pretty easily! I’m planning on buying one again
@motaman2541
6 жыл бұрын
HOT SHOT 1500 had one as a farm bike, can get them leaned over real good and they are real reliable, they are also hill tractors.
@HOTSHOT-ls1bc
6 жыл бұрын
Mota Man yep that’s how I remember mine
@motorsportsgaming1086
3 жыл бұрын
I bought an all balls rebuild kit for my 02 ttr 125. Looking at diagrams of this carb. It says the fuel screw should have a spring washer and o ring. When I removed the original it had just a spring. No washer or o ring. Can anyone give me some help. Thanks
@pacheco464
5 жыл бұрын
Hi mr I got a question you know more than my !! I got 86 Yamaha 125 and I like know if you know the name of the carburetor am looking a carb I just buy this motorcycle but the carb doesn’t came complete need the bottom part it hold with 4bolts even looking for the bottom top lead ! In case you know please let my know please thanks
@peacemaker5251
3 жыл бұрын
THANKS!!!
@Tardonis
4 жыл бұрын
can you please link the parts you purchased for the carb? I would like to replace all of those as well
@Tardonis
4 жыл бұрын
i just subbed, great channel. pls respond
@jerry-md9pf
2 жыл бұрын
Hay i have a yamaha xt125 r with more or less the same engine and carb the bike was stood for around 7 years i have good spark (new plug) iv fitted a new jet checked all the other vents and all seem to flow ok but i still dont think im getting fule in to the engine what else could i check on the carb
@supercooldude824
2 жыл бұрын
Replace the carb
@ProMotoo
6 жыл бұрын
Cameron Can you do a video on What to change in the caburator When you've gotten aftermarket airfilter and bigger exhaust???
@NTRGFX
6 жыл бұрын
you want a larger main jet to accommodate for more airflow the pipe and filter are giving you.
@mrvolts9262
6 жыл бұрын
Whatever exhaust you have will tell you what jets to use, then you just buy those jets and install them into the carb
@ProMotoo
6 жыл бұрын
Noneya fuckinbizniz Thanks
@dylanheadrick3789
6 жыл бұрын
That Raptor Guy The main jet may not be the only change. If the airflow has increased radically, you may require a step up in pilot jet size if you have to open the mixture screws up too far to compensate. In terms of what main jet size to run, that can vary between engines with the exact same parts. If you can, get a few jets of close sizes to the one advertised to work. When you change your jet, do some full throttle pulls down a road for a few hundred feet. When you come to the end of the run, shut the atv off while keeping the throttle wide open; don't roll off until you come to a stop. Pull the spark plug and use the coloring to determine your main mixture. Too white is lean, too black is rich. Tan is good.
@jarrettrides9097
6 жыл бұрын
I want the old fender!
@bradgriffith6234
6 жыл бұрын
Hahaha. I like that magic trick!
@grantsnell6782
6 жыл бұрын
Putting threadlock on the sprocket nuts is redundant as there are locking tabs. It cant do any harm though I suppose.
@ianjohnston6487
6 жыл бұрын
I hate when the airflow screw is on the bottom of the carburetor! especially on the pitbikes, you have to remove the whole carb just to adjust them
@moises8836
6 жыл бұрын
Hi i have a question? Mi chok wire is broken but it won't com off can't get it out what sure i do
@davidwhite6243
6 жыл бұрын
Moises QUINTEROS new carb mine is the same way
@guygaric940
6 жыл бұрын
The random editing at 3:28 lol
@guygaric940
6 жыл бұрын
And then at 4:20
@_.southern_cali_rc_5966
6 жыл бұрын
👍🏻love you videos keep up the good work
@MotoMarvmtb
6 жыл бұрын
Great video!
@jacobfoster4573
6 жыл бұрын
Can you do a video of how you run tge business I'm looking at starting in the UK
@lukasradzimski1033
6 жыл бұрын
Jacob Foster You are second.
@mxrider2strokebraaap54
6 жыл бұрын
Great video!🤙👌
@samnice5314
6 жыл бұрын
Great vid
@jordanbates470
6 жыл бұрын
Good video really enjoyed it
@kirriksanders1222
6 жыл бұрын
Jordan Bates that's true
@paulmullins102
4 жыл бұрын
goods information dude
@177Iceman
6 жыл бұрын
you should build a cr250
@brianmcdonald9502
4 жыл бұрын
Bike looks like it has some well earned hard used miles on it.👍
@jacimclean
6 жыл бұрын
What does OEM stand for?
@CameronNiemela
6 жыл бұрын
Original equipment manufacturer
@509grind
2 жыл бұрын
Why would you ever put water in your gas tank?
@xxclaylingxx6097
6 жыл бұрын
I love ur vids there the best
@bradenweir8335
6 жыл бұрын
I have the same bike but my bike is not the l model
@scotsman9490
6 жыл бұрын
nice video bro
@TepcoCycleRepair
6 жыл бұрын
Don't forget the choke circuit in the bowl for easy cold starts. kzitem.info/news/bejne/k2yYnambqn6jaJw
Пікірлер: 144