Thanks for this. Had the 'cog' error light on, but everything else seemed to be normal. Did the reset, and just like in your video needed to give it two goes before it started the sequence. Out of interest, just before it started, it did a flash sequence which was one pause one pause 8 pause. Does that mean anything?
@donatas6677
2 ай бұрын
Thanks pal, you saved me from absolutely terrible time in central of London 😅
@rolandwaters107
2 жыл бұрын
I’ve got an FRR600 with AMT, if I brake heavy it will grind to change back to 2nd once I’ve stopped, have you had this fault before ??
@ahmad1b
3 жыл бұрын
Hello brother...I have got an Isuzu NLR85-4JJ1 - it’s has got AMT I changed the engine but now the transmission makes a sound when shifting to R or D. It makes a loud sound of engaging into R or D.
@TheH78
4 жыл бұрын
I'm working on a 56 plate NPR that the customer has changed the auto gearbox. Got no speedo/tacho operation. Is there a certain position the drive for the tacho needs to be fitted in to the gearbox to engage the bevel gear? Its a dustbin lorry with non standard tacho drive and when its bolted up, the drive can be turned by hand which is wrong. Any help would be greatly appreciated, thanks in advance.
@vassilisorokine1596
2 жыл бұрын
Great info, thanks heaps
@Ryandejager85
3 жыл бұрын
Is it Same procedure for a 2019 nps? Can't get it to work
@moshupyisporo5887
3 жыл бұрын
How do I no on which hole do I put the wire when doing the reset.
@christleydacosta4747
Жыл бұрын
Greetings Danny 🙏🏽Thanks for the video it really helps one problem u am having after I do transmission reset the transmission reset light still blinking is there a problem with the transmission? Because after you reset i see your lights went out ..please help me Danny all the way from Jamaica.thanks
@vinodhkumar1491
2 жыл бұрын
Hi i own a 2016 npr which gets stuck gears. But after running awhile there seems to be no problem please help
@mijellonbooth8797
2 ай бұрын
Put a brang new smoothbox in a NPR 400 today , this will help me greatly tomorrow. Thank you👍
@goobersteel2231
2 жыл бұрын
Do the stroke sensors on the AMT need programming if replaced with new ones?
@dannyandrew725
7 ай бұрын
No plug n play
@JoseCarrasco-l9x
19 күн бұрын
Hola buenas tardes tengo el mismo problema ya le cambié el aceite y me faltaba ese video espero me sirva consulta que parte lleva los filtros de caja
@nicksugden3396
2 жыл бұрын
Hi Danny, I have a 7.5tonne slide and tilt isuzu n75 190, the electrics (pto in) all work but the slide and tilt won't work? Any recommendations?
@dannyandrew725
2 жыл бұрын
Sorry without seeing it I haven't a clue
@jxanth
3 жыл бұрын
Hi Danny I have a 2019 NLR only selects Reverse and 1 gear. Auto trans light and check engine light on. Any suggestions?
@royaristotiles1872
3 жыл бұрын
engage in any gear with your left foot on the brake and accelerates,if the engine revs normaly the most possibilty,your automatic side major parts are worn out..like oil pump,clutch packed and maybe tourque converter..check also your tcm.
@kyriacospetrou299
3 жыл бұрын
Hello, We have an ISUZU NPR85 2014 automatic transmission and is not shifting on sixth gear. Even not on manual. Sometimes shifts but engine rpms goes high like you keep the clutch pressed.. any recommendations?
@stoneyvill
2 ай бұрын
I'm having the same issue, go up to 6th the drop down to 5th. Did you get it sorted out? Because I was thinking it's the shift solenoid or strainer is blocked 🤔
@kyriacospetrou299
2 ай бұрын
Yes if I remember was the shift solenoid. Need to clean them good with WD40.
@alkhag1988
Ай бұрын
Hey mate i have npr 400 smoother auto idle up adjuster not working and cant engage pto since it stoped working
@ptrduggan5
4 жыл бұрын
Very useful video, I have an npr at the moment that won't shift past 2nd gear, also won't engage pto. I had texa on and found no faults, all seems good. Had the three shift solenoids off and they check out also, any suggestions appreciated ta
@dannyandrew725
4 жыл бұрын
Check the wiring going to the fuse box behind the n/s/f wheel where it goes round the chassis sounds like a split wire
@ptrduggan5
4 жыл бұрын
@@dannyandrew725 will give it a check in the morning, much appreciated 👍
@dannyandrew725
4 жыл бұрын
Are you near manchester
@ptrduggan5
4 жыл бұрын
Dublin! Appreciate your help though
@AlbertoRodriguez-qc6nm
4 жыл бұрын
I have an Isuzu but the GMC w5500 HD 5.2 L diesel and I'm having problems with the transmission I can shift it from Drive second first and go from 1st 2nd drive and it shifts but if I just put it in drive it won't shift at all it will drive but the gears won't shift can you please help me
@themechanicaladvantage3697
2 жыл бұрын
Hi Danny, just tried this relearn and can’t get it to work, trucks just had the valve body thing in front of the clutch pack, got a fault code active p0718 input shaft turbine speed, any ideas or directions for me to go in, with my diagnostic?
@dannyandrew725
2 жыл бұрын
On the bellowing 2 sensor 1 on each side faulty you can wotsapp me on 07887480560
@gobigchannel
Жыл бұрын
Hello. My Isuzu 400 truck does go on reverse gear but it does nothing. The drive gear works correcty it only the reverse gear that does not work even if i put it on reverse. Please help brother
@arjayduenaspaler3445
5 жыл бұрын
My isuzu elf 4jj1 got towed while the gear is in drive mode.and now when it a time to start after it got fixed,it keeps alarming on the dashboard with a gear symbol. My question is how to reset it? Or is it resetable or not?
@dannyandrew725
4 жыл бұрын
Sorry reset by dealers only way
@l00ky56
2 жыл бұрын
Hey bro, my Isuzu 2020 4hk1 paired to Amt MYY6S transmission has lost gear number 6. Any suggestions to fix?
@dannyandrew725
2 жыл бұрын
2020 mate is under warranty back to the dealers
@dannyandrew725
Жыл бұрын
Does it not go in 6th gear in manual aswell
@trunks_aw
2 жыл бұрын
i have the same truck and my tranny light is on and my level indicator light in dash keeps showing R no matter what gear you put it in. helpppppppppppppppppppp
@danielkepler1187
2 жыл бұрын
On a 2018 npr hd gas jobber we just installed a new jasper trans. Buttoning it up tomorrow. I'm told it will need a dealer to flash it once we are done.will this essentially be the same thing ? Thanks in advance.
@dannyandrew725
2 жыл бұрын
No mate it should be plug n play
@danielkepler1187
2 жыл бұрын
@@dannyandrew725 we finishing it up .we appreciate you getting back to us.doing the exhaust manifold bolts while we wait for a few parts.if u got a way to get me your adress wed like to send u one of our company shirts. Thanks again
@dannyandrew725
2 жыл бұрын
Hi mate you can send it to danny andrew c/o crowfoot carriers park street stalybridge Manchester England SK152BT. TEL 07887480560 THANKS
@dannyandrew725
2 жыл бұрын
Where you based
@danielkepler1187
2 жыл бұрын
@@dannyandrew725 hallstead, Pennsylvania .we are a trucking company and have a heavy equipment garage.doing this job for the company that brings us our semi truck tires.we normally don't work on anything non diesel,much less isuzus with chevy parts.lol. I do have the software and TeamViewer but not a version I can connect to there mainframe.
@joancostello
7 ай бұрын
My question is, I have an Isuzu NQR 2009 diesel 4 cylinder. In The USA,. 5.2 L. With bad solenoids automatic transmission., I changed 4 shifting Solenoid, but my Scanner doesnt read anything now.?. Do I need to reset my transmission in order to Scan again any codes.?. All my old codes are gone, thanks JC
@jeremynewton601
3 ай бұрын
Hey. What issues was your transmission having for you to replace the solenoids? Reason I ask is; I have a 2007 gmc w4500 5.2 diesel and it’s not shifting into 4th gear/Overdrive.
@josegaston1257
2 жыл бұрын
Ese gancho que puso en los fusibles ?
@mikejackson8146
Жыл бұрын
Hi Danny I've blown my tcm, getting a new one off Isuzu and they say it needs programing to the vehicle by them before you can even try a gearbox relearn, do you know if this is correct, the problem I have is getting the truck to the dealer as it won't drive at all and they won't come out to my place to do it. Cheers Mike
@dannyandrew725
Жыл бұрын
07887480560 can you WhatsApp me matey
@tayabhussenee5974
Жыл бұрын
Hello Danny For the isuzu transmission reset can i know the red button must be press or not Thanks
@dannyandrew725
Жыл бұрын
Out mate
@countrybreezefarms123
9 ай бұрын
Hi danny i have a isuzu elf 2007 4jj1 engine . The cog light comes on , no reverse , onlt 1 and 5 . Can you help .
@dannyandrew725
9 ай бұрын
Can you WhatsApp me thanks 07887480560
@petertorato985
3 жыл бұрын
I have come across a similar transmission that is showing N even when shifting to R or D. Will this reset help out in fixing my problem..? Transmission has been serviced recently by someone else and now owner has this issue. Thanks in advance.
@dannyandrew725
2 жыл бұрын
No it won't when you do a relearn it's normally when you've replaced something or you have a slow gear change
@dannyandrew725
Жыл бұрын
No it won't
@tafarimarsh9975
3 жыл бұрын
WHICH PINS ARE YOU JUMPING 4 AND 11 ?
@funnyvideos10119
Ай бұрын
Did you figure out which pins should be used
@dannyandrew725
Ай бұрын
4 and 12
@user-wu7sx2zl5d
4 ай бұрын
Hello can you reset the trans on?a 2007 npr the same way?
@dannyandrew725
4 ай бұрын
With the fast and slow button yes
@brunofebbo2473
9 ай бұрын
Hi Danny Any idea how to reset the 2006 isuzu npr 200? I can get the paperclip to bring up the gearbox light to flash but i can't get it to do anything from there. The problem is when I put the truck into drive it beeps and then is delayed for about 6 seconds then thumps into gear a bit hard... This is why im.trying to reset it but can't get it to happen. There's no info out there on how to do it. Any idea?
@dannyandrew725
9 ай бұрын
Can you WhatsApp me
@brunofebbo2473
3 ай бұрын
I dont have whatsapp. Why not just tell me here
@lakshithakalansuriya7680
4 жыл бұрын
Do you have npr 85 lorry gear box learning procedure?
@dannyandrew725
4 жыл бұрын
No sorry matey I dont but send me the full reg and I'll check to see if there is 1 for it
@anujpombra2894
3 жыл бұрын
Hi i got 2008 isuzu frr 500 amt, 2nd gear gets stuck and doesn't goes to 3rd when i am standing at set of lights or in traffic, it happens couple of times a day. Like we can say delays in gearing up and i usually do neutral and put drive again to keep it moving. I tried ur way as in video but the beep doesn't comes up. The light flashing due to wire inserted but nothing happens with fast and slow button. Please advise. Thanks
@dannyandrew725
3 жыл бұрын
Can you add me to your WhatsApp and ill send you a video
@anujpombra2894
3 жыл бұрын
@@dannyandrew725 please send your contact no. With country code
@dannyandrew725
3 жыл бұрын
07887480560 thanks
@moshupyisporo5887
3 жыл бұрын
@@dannyandrew725 how do I no on which hole or port do I put the wire?
@dannyandrew725
3 жыл бұрын
Can you WhatsApp me 07887480560
@danielkadene1122
3 жыл бұрын
Hi Danny would you ? recommend this, just as maintenance procedure if has never been done , 500k , drives good . Just super paranoid about this box packing up some day. So I try do everything to prolong its life . Touch wood all good for now . ?
@dannyandrew725
3 жыл бұрын
No mate only do when it starts to play up pretty bullet proof theses gearboxes
@tmasbai3063
Жыл бұрын
Which plugs are you using 4 n 12..??for the paper clip to go in???
@markfn2
4 жыл бұрын
Hi, how do you permanently disable eco mode or ensure the truck starts in 1st gear everytime. We have 9 trucks, and we have suffered gearbox failures on all of these trucks due to this eco mode. Isuzu says we have to press eco mode everytime we start the truck. I cant relay on my drivers to do that..
@dannyandrew725
4 жыл бұрын
Sorry matey but that's the only way it can be done
@user-pq7tw6hj8e
2 жыл бұрын
@@dannyandrew725 денни здравствуйте, напишите свой номер вотсап, у меня проблема с автоматической кпп смузер, нигде немогу найти информацию про эту поробку
@dannyandrew725
2 жыл бұрын
Sorry matey you cant
@matsbugs1
Жыл бұрын
You could hook up a timer and relay to "press" it automatically whenever the vehicle is turned on.
@siyangamuteto8741
Жыл бұрын
The cog light comes on when I am trying to start off. But goes off after sometime . Sometimes the truck slips in gear 2,3 and then in 6th gear when a acsending uphill the cog light comes one and slows down the engine speed.
@dannyandrew725
Жыл бұрын
Can you get a error code of it
@dannyandrew725
Жыл бұрын
Do it through WhatsApp cheers
@countrybreezefarms123
9 ай бұрын
I can't reach you on wattsapp
@billycorpuz6770
2 жыл бұрын
I had tried it to my truck this morning but it doesn't reset. will you give me more troubleshooting as my unit will not go further to 6th gear. Thanks in advance.
@stoneyvill
3 ай бұрын
Hi, I'm having the same issue did you get it sorted?
@trentburriss
2 жыл бұрын
Hi Danny, my 2017 NPR 55-155 AMT is stuck in neutral but saying it is in reverse on the dash. Have you got any ideas of what this could be. Thanks Trent
@dannyandrew725
2 жыл бұрын
Sorry only guessing without a error code
@trentburriss
2 жыл бұрын
@@dannyandrew725 thanks Danny. I should have given you the fault codes P0889 P0685 P0700 U0100. Hope this can help. Also I tried the paper clip trick and that didn’t work.
@dannyandrew725
2 жыл бұрын
Can you WhatsApp me 07887480560 thanks
@dannyandrew725
2 жыл бұрын
889 is earth wire from tcm broken going to the fuse box on n/s outer fuse check wires near the fuse box where they go under the chassis
@trentburriss
2 жыл бұрын
Thanks I’ll check that when I get home. I can hear the relay clicking when changing gear shifter.
@Martin-ii7if
Жыл бұрын
Hi I have the NPR got in it to start it and dash lights flickered now no power in cab at all,,, Fused wire is fine power is ok to alternator... I now have no clue, any ideas ?
@dannyandrew725
Жыл бұрын
Have you checked live feed to starter motor
@dannyandrew725
Жыл бұрын
Or check your batteries maybe flat jump leads
@jonwilkins5402
3 жыл бұрын
Hi got one with a gearbox light on.. jumped the OBD and got a flash code of 38!! I think Amy thoughts
@jonwilkins5402
3 жыл бұрын
It doesn’t drive at all.. it’s an 06 plate
@dannyandrew725
3 жыл бұрын
@@jonwilkins5402 not sure matey you can call me any time 07887480560
@jacquelineforbes2115
2 жыл бұрын
Hi Question I lost the key for my Isuzu elf truck , but I cannot get someone to cut a spee
@dannyandrew725
2 жыл бұрын
Wot year is the truck
@jacquelineforbes2115
2 жыл бұрын
@@dannyandrew725 2007 Isuzu Elf Thanks for your reply
@joancostello
7 ай бұрын
What do you call the 3 big solenoids in an automatic transmission.? The smalls are called Shift Solenoids. ButI dont know the name of these 3 big solenoids in my automatic transmission. Thanx
@dannyandrew725
7 ай бұрын
Can you WhatsApp me
@dannyandrew725
7 ай бұрын
07887480560
@JG-tk7ov
4 жыл бұрын
Ive got 69reg and the gear change is so slow its actually a hazard even more so when Im towing a chipper and carrying woodchip. It changes gear so slow that once its done it the road speed has gone down so it changes back down to second and it happens all over again. I just take it out of eco and use the manual shift.
@dannyandrew725
4 жыл бұрын
69 reg take it back to the dealer they should sort it out for you
@JG-tk7ov
4 жыл бұрын
@@dannyandrew725 cheers mate ur nice bloke for doing this
@davidmusyoka6983
Жыл бұрын
Hello...mine is engaging the gears but not moving
@bravoclayton4606
2 жыл бұрын
Which two I plug the wire on
@dannyandrew725
2 жыл бұрын
Can you WhatsApp me and I'll send you a picture cheers
@user-ir7dp6xj1b
11 ай бұрын
Hi Dannie I hve this Isuzu 250 NMR automatic when I put it on drive it select gear 5 what could be the problem
@dannyandrew725
11 ай бұрын
Without a error code its just guess work quite possibly the wireing
@brunofebbo2473
3 ай бұрын
Did you find the problem. I have a 2006 problem doing the same thing. Goes to 5th when you select drive.
@roshanharrilal8112
7 ай бұрын
Hi Danny my truck keeps taking transmission oil bit can't see any oil leaks
@dannyandrew725
7 ай бұрын
Hi mate red oil or gearbox oil
@deejayprime254
3 жыл бұрын
I have isuzu N75 190 and speed sensor is disturbing what can I do?
@dannyandrew725
3 жыл бұрын
Wot do you mean
@ricardomindo7261
Жыл бұрын
please ,which pins are you jumping 4 and 11! to reset
@dannyandrew725
Жыл бұрын
4 and 12 and the gearbox light should flash
@dannyandrew725
Жыл бұрын
You can WhatsApp me if you need to
@cybergames1090
3 ай бұрын
Hi i have isuzu 2012 npr 200 amt 4hk1 engine has fault code p700 and p0909. P0900 and the gear doesn’t move down Shift or upshifting
@dannyandrew725
3 ай бұрын
Can you WhatsApp me
@cybergames1090
3 ай бұрын
@@dannyandrew725 how to get your whatsapp bro
@cybergames1090
2 ай бұрын
@@dannyandrew725 how to get your whatsapp
@cybergames1090
2 ай бұрын
@@dannyandrew725 how to get your whatsapp
@cybergames1090
2 ай бұрын
How to get your whatspp
@bravoclayton4606
2 жыл бұрын
I did the reset and after the clanging in the transmission the nutral light did not come back up and now the truck can't go in any gear. How can I correct it
@dannyandrew725
2 жыл бұрын
Wot reason did you try a relearn
@dannyandrew725
2 жыл бұрын
Are you on WhatsApp if you are send me a message 07887480560
@johnbbrown5750
Жыл бұрын
What was your fix bro. Am in the same spot too. No gear indicator light in dash and struggling to go in gear
@MYKEYSAUTOMOTIVE
3 ай бұрын
Having issue p0766 when it’s in drive
@dannyandrew725
3 ай бұрын
Can you WhatsApp me a picture of the fault cheers
@jjd8865
4 жыл бұрын
Hi, i have an Isuzu LT434P with AMT. The gearbox will randomly shift out of gear while moving, i.e suddenly the same warning light will show up on the dash, engine revs but vehicle isn't responding, causing me to be stuck in the middle of traffic. Had to shift to neutral and drive again for a few times for the gearbox to re-engage the gear. Had tried servicing the gearbox and even changing the fluids but the problem is still resurfacing. Any idea if your method will help? Thanks in advance
@dannyandrew725
4 жыл бұрын
You can always try my method but if it keeps coming out of gear it could possibly be 1 of the 3 gear change cylinders on the side of the gearbox faulty
@jjd8865
4 жыл бұрын
@@dannyandrew725 its always the 3rd gear that has this issue. It only happens to the 2nd or 4th gear a few times. But most of the time its the 3rd gear
@dannyandrew725
4 жыл бұрын
@@jjd8865 can you send me a picture of your gearbox on WhatsApp 07887480560
@kvemmer5390
2 жыл бұрын
Hi, what's the difference between npr and nqr
@dannyandrew725
2 жыл бұрын
They are the same
@dannyandrew725
2 жыл бұрын
Nqr are the early truck npr are the later
@larylongprong
Жыл бұрын
L0L clip it into the b d i read em you'll know which one it is there's two ofem wot ya connect! (out of 16 connections on the OBD plug) yeah but if short the live wire to the ground wire pop goes the fuse!
@dsrworld8
2 жыл бұрын
Bro my truck not starting and the truck is on reverse not nutral
@matsbugs1
Жыл бұрын
What do you drink mate? Thanks heaps for posting this.
@dannyandrew725
Жыл бұрын
I take it it solved your problem
@dannyandrew725
Жыл бұрын
Any donations through PayPal to my mobile number 07887480560 cheers
@Sidrcride
4 жыл бұрын
what was the reason that it need to be reset? ]
@dannyandrew725
4 жыл бұрын
If it has new parts fitted and sometimes its starts missing gears and so on so a reset now and again does no harm
@Sidrcride
4 жыл бұрын
@@dannyandrew725 thanks for the reply, would love to see a vid on how to do an AMT fluid change, I only seem to get less than a litre of fluid out when I drain it.
@dannyandrew725
4 жыл бұрын
@@Sidrcride hi mate the way you done it is the only way apart from taking the gearbox out 1 and a halve lts out same back in and run for 20 mins and do the same again probably 4 . 5 times until its looks clean I hope this helps thanks danny
@Sidrcride
4 жыл бұрын
@@dannyandrew725 thanks alot mate.
@anniemcloughlin7015
3 жыл бұрын
Batteries were installed incorrect for about 10 seconds! Now only have first and reverse and not charging Code UO 101 loss compunction Any advice would be appreciated
@dannyandrew725
3 жыл бұрын
You've probly popped the tcm
@dannyandrew725
3 жыл бұрын
Can you call me 07887480560 thanks
@anniemcloughlin7015
3 жыл бұрын
@@dannyandrew725 Thanks Just seen your reply now what’s a good time to call ? Also not charging batteries, probably fried the alternator. Is there a fuse anyway?
@dannyandrew725
3 жыл бұрын
There is a fuse but start it up and check the voltage coming out of the alternator 1st easiest way the fuse box behind the n/s wheel swap the 2 yellow relays and try your gears when you have swapped them
@anniemcloughlin7015
3 жыл бұрын
That fixed the transmission, all gears working now!! Still not charging , alternator is good , Fuses 27 to 33 are all good but don’t have any power
@tonimartin100
3 жыл бұрын
You save me
@bravoclayton4606
2 жыл бұрын
My transition is now stuck In nutral and the light does not me back in Das board
@dannyandrew725
2 жыл бұрын
Why have you done a relearn
@robertwilliams3777
9 ай бұрын
I tried to reset my transmission and am not hearing the beeps after pressing the fast button for 15 seconds
@dannyandrew725
9 ай бұрын
Can you WhatsApp me 07887480560
@jamescon7712
2 жыл бұрын
Hi thanks for the vid my isuzu 11 ton f series when I start it it is in 5 and I have to go down the gears to get it into 1 to take off
@mahlatse3138
2 жыл бұрын
Does your speedo work when you are driving? If not change the speedo and that should sort out your problem.
@abemarais4058
Жыл бұрын
@@mahlatse3138 hi hello ...where do i find the speedo ,mine has a blank off where the speedo is suppousd to be
@JoseCarrasco-l9x
19 күн бұрын
Hola buenas tardes tengo el mismo camión y me sucede lo mismo
@juniorbigby9975
6 жыл бұрын
I need help with my Isuzu can you help me
@dannyandrew725
5 жыл бұрын
07887480560
@sreekanthmvijayan7788
5 жыл бұрын
Please give me your country code
@wendysetyadi1721
5 жыл бұрын
Hi,, how to check engine code ,,what pin no
@andersonbisnath2566
4 жыл бұрын
@@dannyandrew725 i need help my friend
@dannyandrew725
4 жыл бұрын
@@andersonbisnath2566 wots up my mate
@bidong
3 жыл бұрын
Also, what does the red button do?
@dannyandrew725
3 жыл бұрын
The red button is 1 gear emergency if all gears lost
@bidong
3 жыл бұрын
@@dannyandrew725 is it normal that you cant rev the engine in P? Only with the red button depressed, it revs
@dannyandrew725
3 жыл бұрын
No it should rev up in both
@bidong
3 жыл бұрын
@@dannyandrew725 Do you know its rev limit? Ours rev up to 3800 rpm only
@dannyandrew725
3 жыл бұрын
Yep sounds about right for revs
@felixokeko
Жыл бұрын
How can you clear the transmission and differential oil error on the dashboard
@dannyandrew725
Жыл бұрын
You have to press the button and it will change to more milage
@tafarimarsh9975
3 жыл бұрын
I performed this video now my vehicle will not go into Park Drive nothing at all shifter display blank
@dannyandrew725
3 жыл бұрын
Why did you do it in the 1st place did it have a fault
@dannyandrew725
3 жыл бұрын
Can you ring me
@tafarimarsh9975
3 жыл бұрын
@@dannyandrew725 it had a code for this mode shifter I cleared the code and performed the reset procedure just as you instructed it went down to the last stage where the screen went blank for the shifter now it's stuck there not able to move the truck
@shalenbernard487
2 жыл бұрын
@@tafarimarsh9975 Hi I got the same problem I did the reset and now it won't shift in gear
@shalenbernard487
2 жыл бұрын
@@dannyandrew725 Hi I did the reset and now nothing in the display can you and it's not shifting can you please help
@gt3505
Ай бұрын
Pointless video you don’t even mention which prongs to bridge together all you say is you’ll work it out
@dannyandrew725
Ай бұрын
@@gt3505 like it says in the video you can call me on WhatsApp
Пікірлер: 219