Great to see all the variations and modification of the D19s. The N/A 426 started in the D21 Series I tractors. Those D21s were a tough looking compared to the Deeres and IHs of the day.
@TimothyFluegel
Жыл бұрын
Thankyou Dean. The d21s were a tough looking tractor I've always loved even the 190s 200s 220s that square hood just catches my eye.
@daleschroeder8661
Жыл бұрын
Yeah they were the tractor. We had one it was a bomb
@TimothyFluegel
Жыл бұрын
I've always loved the 19s the gassers are little thirsty but always ready and reliable to do the work!!
@jeffrodgers4500
Жыл бұрын
Enjoy all of your AC tractors and working them keep it going thank you!!
@TimothyFluegel
Жыл бұрын
Thankyou Jeff!! I don't see me stopping anytime soon lol.
@craigrasnic4178
Жыл бұрын
There’s more D19’s lined up there than I’ve seen around here my whole life awesome buddy
@TimothyFluegel
Жыл бұрын
Thankyou Craig!! It's impressive to even me acualy. I never would have thought there would be that many here even though the one isn't ours it's still awesome to see all 3 models siting together.
@jvin248
Жыл бұрын
Nice lineup! If you want to paint without painting, try the recipe from the vice grip garage channel: 1/3 boiled linseed oil with 2/3 mineral spirits then brush or cloth rub it on in a thin coat or two (thick coats it remains sticky). They call it 'shine juice' and it freshens up and protects tractors left in work clothes. I found it lasts about a year in outdoor storage, longer if kept inside -- quick and easy to apply.
@TimothyFluegel
Жыл бұрын
I've heard this Before some guys use it on their tractors for the pulls, almost looks like ya clear coated it 😆.
@terryhawkins4295
Жыл бұрын
Pretty cool!
@TimothyFluegel
Жыл бұрын
Thankyou Terry!
@garybarrett6581
Жыл бұрын
my dads D19 had a cab like that!! and l found a Excel cab and put on mine and had AMFM radio heater and wiper and dual fm radio antennas!! all so orange shag carpet on sides top and floor!! later l added an 8 track player that run off a honda battery this was before Alternators thts was in the early 70s also l bolted a length of flat iron across the front of the cab and put head lights clearance in the middle and dual flashers on the out side of the bar. l costom ground feed for my dad feed store and did a lot of grinding in the winter!!!! also farmed 200 acres of row crop was a gas and l welded a quarter inch flat iron around the header pipe and pull a straight pipe on it 3 inch l think!! well l have rattled on long enough!! l will be watchin!! and Franky is a BEAST!!!!
@TimothyFluegel
Жыл бұрын
It sounds like you had the Cadillac of D19s for sure Gary 😆 I wood have loved to see that, but you painted a pretty good picture.
@garybarrett6581
Жыл бұрын
@@TimothyFluegel l have pictures and will try to get my boy to send you some copys
@robertnaughton5577
Жыл бұрын
I remember Frankie...one of the stars of the Badger Steam and Gas Engine show in Baraboo, WI. A beast for sure! Look forward to seeing the CA during your 4th of July roundup.
@TimothyFluegel
Жыл бұрын
Thankyou Robert!! It sure was a popular tractor up in Baraboo everyone wanted to talk about it 😆
@TimothyFluegel
8 ай бұрын
@dob652010 not all of us have a 6080 intake laying around, but I do have a bunch of extra tin work laying around. People like you think your shit don't stink and you must not have read my comment about rather getting info out of a horses ass. Stop being a hater and worry about your own projects. Fact of the matter is this tractor is perfectly functional and I really care less what it looks like. But pessimistic people like yourself look past all the interesting shit in this video and comment on the one thing you see is wrong because you don't like it when other people have nice things. Or someone doing something before you. I find it hilarious that you guys were so concerned about it that you had to go and put one in a 17. Then in bold lettering on the post in the Allis forum. You put CAREFUL PLANNING MAKES FOR NO CUTTING OF THE TIN WORK. Why do you evn give a shit??? Because some kid built it in a 2 stall garage with very limited experience??? For some reason that seems to bother the both of ya. But long story short if you don't have anything nice to say keep it to yourself. It's amazing how simple life lesson like that are lost on people like you.
@evanaustin2636
Жыл бұрын
Nice collection of D19's there Tim! It'll be cool to see that diesel get rebuilt. Hope you have a good one Tim!
@TimothyFluegel
Жыл бұрын
Thankyou Evan. The 19 diesel I think is next on the chopping block. I'm pretty sure I've got all the parts here just need the time here in a month or so things will slow down in the field for a bit I hope to get to it then.
@davevonmuenster6649
5 ай бұрын
Thanks
@TimothyFluegel
4 ай бұрын
Your welcome. Thanks for watching!!
@mattutke4704
Жыл бұрын
Is Tim the tool man a mad scientist too? Lol I've never seen a D series with a cab, it's always been open station. Is that a factory cab? Thanks for the video Tim 🚜🚜🇺🇸👍
@TimothyFluegel
Жыл бұрын
Well your definitely not the 1st one that's called me a mad scientist so it must be true lol. It's a hiniker cab. Aa fat as I know it was a factory option however don't take this info as facts is the 1st one I've even seen and I haven't done allot of research on it yet.
@EricAragon-w7i
4 ай бұрын
Would you happen to have a starter for a d19 lp or would you know if it's the same starter as the gas engine. Been looking everywhere and can't find any parts or info. Thanks in advance.
@TimothyFluegel
4 ай бұрын
Google search bill deppe allis chalmers salvage in makocada IA. I would think he'd have one or point you in the right direction. He ships too.
@JohannZ100
Жыл бұрын
I hate to sound silly or stupid Im just wondering if you can run a regular propane tank with a regulator to a lp d19 and where can you get lp gas for it i already know where i can get a propane bbq grill tank from walmart or a gas station
@TimothyFluegel
Жыл бұрын
You sure can. Lp or propane will run it. The tractor has the regulators on it already would just have to plum in the hoses from the factory tank and there ya go. Just go swap tanks at Walmart when they get empty or if you have a friend that runs natural gas for their house you could set up a portable fill Station to fill your Wal-Mart tank there.
@TimothyFluegel
Жыл бұрын
You sure can. Lp or propane will run it. The tractor has the regulators on it already would just have to plum in the hoses from the factory tank and there ya go. Just go swap tanks at Walmart when they get empty or if you have a friend that runs natural gas for their house you could set up a portable fill Station to fill your Wal-Mart tank there.
@JohannZ100
Жыл бұрын
@@TimothyFluegel thanks so much
@TimothyFluegel
Жыл бұрын
@@JohannZ100 your welcome anytime.
@bobfoos5939
Жыл бұрын
do you have any extar parts you are willing to sell for a d19 diesel
@TimothyFluegel
Жыл бұрын
I don't have anything extra as far as engine parts. I have some chassis parts. However depending on what you need I should be able to get them for you or send you in the right direction.
@bobfoos5939
Жыл бұрын
@Timothy Fluegel I'm looking for the air cleaner intake cap. And hydraulic lines that run from belly of tractor to the controls on the left side of drivers seat
@TimothyFluegel
Жыл бұрын
@@bobfoos5939 so 2 places you could check. 1st try bill deppe. Just Google ac tractor salvage in makocada Iowa. Hell pop up and prolly has one. He ships too. Then you could try calling all state ag parts. They have alot of parts that aren't listed on their website and will also ship to you.
@TimothyFluegel
Жыл бұрын
@@bobfoos5939 a far as the hyd lines, we have hoses made to replace the hard lines. I life to use compression fittings and reuse the fitting off the hard line Eben on the high pressure lines we have many houses on our d series tractors and 190 that have been replaced allot cheaper and easier to find.
@stevepropst9849
Жыл бұрын
Own 4 2 diesels 2 gas
@TimothyFluegel
Жыл бұрын
They are great tractors the 262 gas was as reliable as an engine that you could ask for.
Пікірлер: 38