Great episode. No BS, not boring, no over hype. Love it
@AussieArvos
Жыл бұрын
Thanks Tony!
@CatchysAdventures
Жыл бұрын
Build's coming along nicely boys! Looking really good! Super unlucky about the wheels but fingers crossed it gets sorted for you 🤞
@AussieArvos
Жыл бұрын
Thanks catchys! We'll figure something out!
@fatmanoverlanding
Жыл бұрын
What a bugger with the wheels. Hopefully it's sorted by now. Keen to know your thoughts on the suspension and if indeed as you've said, you'll actually use the adjustments. Loving these episodes just as much as your travel episodes. You just edit & narrate them so well. Really engaging and entertaining. Great work. 👍
@AussieArvos
Жыл бұрын
Thanks so much Fatman! We will definitely let you know how they go! Really appreciate the support mate, means alot! 🤙
@harrywalker968
Жыл бұрын
@@AussieArvos bit of advice for you young wipper snappers.. TIE THE COILS IN, top & bottom.. dont rely on the shock.. or make limiting straps. for your education,,go find an f100 4x4.. maybe copy the full suspension.. japs never got it right..not even superior suspension.. just expensive sht..
@harrywalker968
Жыл бұрын
@@AussieArvos never any wheel trouble with yank stuff.. all the same from 1940..till 2000. 5 stud,, 8 stud 160.5 then 8 stud 170.. did you specify yr & 4wd.. if so, dont unrim them, ring them, take wheels there,,there problem.. i have a set of steel 16x10. with 160.5 & 170 driiled,, so they fit 3 trucks.. 1 have 4 all up.. 62 f100 4x4 v8, to a s/duty..only jap 4x4 id buy would be a gu, then fix it..proper..method wheels can be run real low pressure.. bought a set of 17 x 9,5. for s/duty, from u.s. $800 delivered..
@Mojojosie86
Жыл бұрын
Always test fit wheels before getting tyres fitted! But I guess you've learned that now 😅
@AussieArvos
Жыл бұрын
Lesson learned 😅😅
@AUSBennyb
Жыл бұрын
alright made her back in your prado, captain obvious here
@psmitchell
Жыл бұрын
Well done, Captain obvious.
@bazza2540
Жыл бұрын
you're like those people that watch a funny video then just write the jokes out in the comments
@brentonokeefe7321
Жыл бұрын
Awesome build. Keep it up and hopefully get the wheels sorted in time. Looking forward to it.
@roadsafe4wd193
Жыл бұрын
Great Job Fitting Our Blackhawk Bump Stops these are available at all good off-road stores
@Br3no94
Жыл бұрын
Mint content fellas! Love seeing the production progression! Keep it up 🤙 Damn shame about the wheels but it’s gonna look so mint when you’re done Liam!
@AussieArvos
Жыл бұрын
Thanks Breno! Means alot mate, cheers
@braunshock6112
Жыл бұрын
What an awesome build, that is going to look the mutts nuts. Thanks for keeping it real and really hope you have a solution soon.
@RoMiTouring
Жыл бұрын
You guys do the best stuff on here. Always fun to watch and informative. Really enjoyed the Harry/Fire to Fork ones too..
@mitchellboyd5256
Жыл бұрын
Awesome build 👌 just one little thing, you are better iff painting those wiper arms, on my gq the chrome used to reflect the sun like a mofo
@frmtrkr
Жыл бұрын
good looking wheels, hope you get em sorted out how you want em. terrific job you are doing on the rebuild.👍
@Philipk65
Жыл бұрын
Great to see the Patrol coming together. Bet it will look awesome when finished, just judging from what it looks like now.
@AussieArvos
Жыл бұрын
Thanks Phillip! Can't wait to show you the end result!
@Philipk65
Жыл бұрын
@@AussieArvos Will definitely be looking forward to it. Pity about your rims not fitting.
@rickyphillips8557
Жыл бұрын
Good on ya boys! Loving watching the build. Been watching your videos for few years now and your content and production value are constantly getting better and better all while staying authentic and relatable! Keep up the good work. (Good luck with the rims Liam, gotta love that stuff) 😂
@samyeomans6710
Жыл бұрын
Please get some nice corner indicator lights on the front. Orange ones just look meh. Also very glad you painted it instead of raptor.
@cyclemoto8744
Жыл бұрын
Keep up the positive outlook Well done lads. Cheers
@bennhall6246
Жыл бұрын
Got to roll Over and turn tv on, bang Aussie Arvos, just what I needed after a big Saturday night
@AussieArvos
Жыл бұрын
Cheers mate , enjoy! 🤙
@HammerRocks
Жыл бұрын
Yeah, make sure you can still easily access the adjustments on the remote reservoir in any conditions. Last thing you need is having to crawl underneath when wet or muddy etc. Great progress. It's starting to look like a track weapon. Beadlocks are illegal for road use in NSW. So I'm sure a lot of the hardcore 4WDers in NSW are watching this with envy. But it sux that you were sent the incorrect wheels. Hopefully it's been sorted by now. Great episode boys. 👍👍
@AussieArvos
Жыл бұрын
Thanks Hammerrocks , we'll hopefully get it sorted asap!! Cheers :)
@HammerRocks
Жыл бұрын
@@AussieArvos BTW boys, you should consider making a velcro backed patch of your logo. It's what I buy with content creators I follow. I hope you consider it. 🤞
@MultiSkate01
Жыл бұрын
Just the struggle of working on a car, I'm having the same issue this week. Guess we're in the same boat 😅
@AussieArvos
Жыл бұрын
Haha that's it mate, not a great feeling 😅😅
@bigkevcanb
Жыл бұрын
Bummer, great to see the build vid. Hope you get it sorted in time
@AussieArvos
Жыл бұрын
Thanks big Kev!
@angryman3317
Жыл бұрын
Despite the hiccups (all builds have many ) you're doing a fantastic job mate. Keen to see the end result.
@PokeGaz
Жыл бұрын
Absolute Devo!!!! Can only imagine the feeling in the guts when you realised they didnt fit
@tadeuszmichaelwlodarczyk3120
Жыл бұрын
It's definitely turning into a Beast✔️✔️. Pity to get it all dirty!!🤣. I noticed in the back ground Nice Deer 🦌 Head.
@AussieArvos
Жыл бұрын
It's getting there!! Cheers :)
@kylemclean4064
Жыл бұрын
Hope it all goes mint for ya next fitting Liam keep up the awesome job fellas 👍
@Jagermonsta
Жыл бұрын
Ha what a bummer! good reason to go back to steelies ;) loving the build, and appreciate the way you guys interact with the camera and don't hype the shite out of everything, but still maintain enthusiasm. you guys and dan are great. refreshing even
@AussieArvos
Жыл бұрын
Thanks jagermonsta! Really appreciate the support!
@TerryBeatson
Жыл бұрын
Best of luck with the wheel situation, she'll be right lads. Can't wait to see how the canopy comes out.
@RingoTravels
Жыл бұрын
Bugger - another great video though!! Looking forward to seeing the finished product 😊
@chrisbeerad8835
Жыл бұрын
Machine the centers out . ive done it before numerous times . just ensure there is still enough wall section. Great choice of tyre as well they will smoke razors in slop you watch
@clarkbarryj
Жыл бұрын
highs and lows liam - nearly there mate ..
@AussieArvos
Жыл бұрын
Thanks mate :)
@cidadaodorense3231
Жыл бұрын
You probably got the rim for a Toyota, which has a center bore of 106mm. It's really just 4mm difference on the diameter, 2mm on the wall. I almost feel like machining those 2mm of the wall would not compromise it, but who knows.
@rossco3775tv
Жыл бұрын
WOW she's looking awesome mate, may as well go all out only live once. . Can't wait to see how she comes up.
@AussieArvos
Жыл бұрын
Thanks Rossco!
@paulwitherington5529
Жыл бұрын
Great video as usual guys. Love how you discussed the 💲 and reasons behind your choices. Those wiper blades are bling. Shame about the wheels, seems you have ordered correct bore, just not bored correctly. Hopefully supplier will come through. Personally I can't wait to see the tray. Great build series
@Jeep.wj.tj.australia
Жыл бұрын
🤞 you get it sorted 🙏 And yet another great episode 👍🏻
@brettkidd7487
Жыл бұрын
Hell Yeah! 🤘 Good way to kick off the Sundee Morning 👌
@leviblenkiron7572
Жыл бұрын
This is going to be such an awesome rig well done with the build so far
@karloz83
Жыл бұрын
If you carnt get the rims take to a machine shop and get the middle lathed out to the correct size. I have done this before on an old patrol as long as the wheel studs are right it won’t take much to large the centre. Keep up the great work
@theworkshopmechanicchannel3296
Жыл бұрын
Nice wheels. I’m pretty sure that somewhere in that box it will say to fit the rims to the vehicle before mounting the tyres to them to check fittment
@RoscoAdams-xt5lp
Жыл бұрын
🇦🇺 Keep On Trucking 🛻 Luving The Rebuild 👍🏻👍🏻
@AussieArvos
Жыл бұрын
Thanks Rosco!
@bjlanders
Жыл бұрын
Man, I just learned about this uncommon bore issue today as well! I was ready to bolt on a set of Toyota's, and noticed a slight visual difference...106 vs the required 110.....so it's either to the machine shop, or maybe a router if I feel adventurous tomorrow!
@RedWazzies
Жыл бұрын
I am loving your build! ❤
@steventhebushwog
Жыл бұрын
Spewing man. It would of been good to see them on the rig. All n all the patrol is coming along nice👌👌
@Stuart_Field
Жыл бұрын
Had a similar issue on my 06 GU TD42 ute. Got stock steelies powder coated. Needed a die-grind so they'd go back on the hubs. Tyre shop (Bob Jane Kotara NSW) were all over it. Keep up the great work tho lads it's coming together great these hiccups happen from time to time. Cheers
@JRazza89
Жыл бұрын
Get them thrown in a lathe and increase the centre bore. Not a hard job, only thing is the centre caps won't fit, but you can make 3d printed adapters or use thin alloy pipe adaptors to make them work also with the larger centre bore.
@mikeg1074
Жыл бұрын
Liam, I was so looking forward to see what the patrol looked like with the new rims and tyres. Hope you get it sorted mate.
@AussieArvos
Жыл бұрын
Thanks Mike! Hopefully have it all sorted soon! Cheers :)
@peterjarrett8099
Жыл бұрын
gutted!!! im sure its going to look insane with the new wheels boys!!
@damiencrook7147
Жыл бұрын
what a shame wheels looked great, cant wait to see finished rig in Sydney. Been awesome watching the build from the start.
@AussieArvos
Жыл бұрын
Thanks Damien! Hope to have it sorted by then! See you there, cheers :)
@kingninja2794
Жыл бұрын
Max respect for taking that so well. I would have flown off the handle for something like that to sit me down Best of luck for another set though they do look schmicko
@AussieArvos
Жыл бұрын
Thanks king ninja!
@BOOST3D
Жыл бұрын
You guys better feature this at Melb 4x4 show looks mint!
@daylanhonrado1639
Жыл бұрын
You can get them bored out at any tyre shop got mine done at continental Mitcham
@lronpaw
Жыл бұрын
Thats project cars for ya! Just wondering with your remote res clamps in the rear. I've got Dobinsons MRRs' and i know their instructions say not to clamp in the middle of the body of the res. I'm guessing this is because floating piston and clamping may interfere.. if its not in their fitting instructions, worth asking the question of fulcrum to check. Keep at it fella's not far off now!
@Y61Shorty
Жыл бұрын
G003 are a staple for Snow-wheeling in Alberta Canada. Great tire, my safari has them on up here for the snow 🤘🏻
@Madmarty101
Жыл бұрын
Build looking great mate , aussie way to deal with a problem is to have a laugh and move forward, so wheelie shame about the rims but can't wait to see when it's sorted out
@AussieArvos
Жыл бұрын
Thanks Marty! That's it, We'll figure something out !
@brentway5914
Жыл бұрын
You should be able to keep those rims and get the 10mm machined !
@Zobby447
Жыл бұрын
Have a look at JW speaker 8700 headlights absolutely Awsome upgrade
@bogan1as
Жыл бұрын
Really keen for the tray ep once i get my new car ill be pulling my gu off the road for a make over and currently looking for inspiration
@monaroman37
Жыл бұрын
remote res bolt at top be hard to undo with tray on, turn brackets around
@blairskevington6631
Жыл бұрын
the builds looking great, it sucks when parts dont work out but im sure nathan will sort you out
@Tijke
Жыл бұрын
Just an unlucky snag, but the whole build is coming along great!
@truetierra
Жыл бұрын
Bugger about the rims. They owe ya a carton for the mixup for sure! Rig is looking sik though.
@Mic4569
Жыл бұрын
Those rims would fit the 80 perfectly ;)
@blackbilly1965
Жыл бұрын
Bummer bro, the tire rim combo looks badass
@AussieArvos
Жыл бұрын
Thanks Billy, hopefully can get something sorted 🤞
@rotamota3200
Жыл бұрын
Aren't beadlock wheels illegal here in VIC?
@BrentonStammberger
Жыл бұрын
everything is in VIC
@NateH-qd7bm
Жыл бұрын
Poor Liam is it, that would suck but at least the looks good
@nemyla
Жыл бұрын
Nearly at a 100k boys!
@AussieArvos
Жыл бұрын
Getting close now!
@jpbloodyaussie
Жыл бұрын
Nice rims to suit a Navara...........
@kettlegq8792
Жыл бұрын
I had the same problem with my non beadlock walkers and had them machine out with the boys at off-road konnection as alloy wheels are had to find with a big bore
@sefisredtv8991
Жыл бұрын
Excited for the tire review. Separate video pls.
@PaddyBoy644
Жыл бұрын
That’s wheelie disappointing mate! All jokes aside this rig is looking awesome can’t wait to see it out on the tracks. Cheers Pat
@AussieArvos
Жыл бұрын
Thanks Pat!!
@scottcrowe6736
Жыл бұрын
Looking good, hope to catch up with you blokes in Sydney 👍
@AussieArvos
Жыл бұрын
Thanks Scott! See you there! Cheers
@jamesbeasley1753
Жыл бұрын
Gonna be a weapon mate, fingers crossed about the wheels, shit happens
@AussieArvos
Жыл бұрын
Thanks James! We'll get there!
@bradrugg8705
Жыл бұрын
Bloodly gutted lads. Good attitude to have though. The build is looking awesome and I'm m sure you'll have it sorted soon.
@AussieArvos
Жыл бұрын
Thanks Brad! We'll work out a solution 🤞 Cheers for the support 🤙
@Reuben_rmr
Жыл бұрын
Just need the bores machined. Common practice as the older vehicles like Gu and Gq are larger than the new vehicles they manufacture these wheels to suit
@outlawdingo3020
Жыл бұрын
You could send the rims to a machine shop to bore the centre out to the measurement you need
@jayarre1839
Жыл бұрын
I really hope you used a genuine windscreen seal bro 😭 if you didn’t it will %110 leak. also if any sealant was used it will definitely cause rust and leaks. take it from me, had my windscreen changed 4 times, leaked 3/4 until the 4th when i finally got a genuine seal
@Rightomate
Жыл бұрын
Are you going to get it engineered? Build has come along great. Would be a shame to get it defected for 35s and lift. I personally have had nothing but dramas with police in the high country due to lift and tyres.
@MitchDenham
Жыл бұрын
Shame about the wheels mate. I have the All Terrain Yokohama Geolandar’s on my Prado 150, and they’re epic tyres. I’ll definitely be going the Geo’s again, but maybe the AT-X next time for a bit more aggressive tread.
@6226superhurricane
Жыл бұрын
get the centre bores opened up on a lathe. carton of beer or two should sort that minor problem out.
@dwayneadamec1993
Жыл бұрын
Get a machine shop to take out the centre to the correct size will cost bigger all
@sama5946
Жыл бұрын
With a set up like this is your old man a engineer? Boiler maker? Mechanic?
@aus-reviews8462
Жыл бұрын
took one for the team mate...
@nathanbirkefeld7211
Жыл бұрын
Get yourself some coil retainers so they don’t pop out when wheeling offroad.
@jakefoster633
Жыл бұрын
Bummer on the rims man but keep up the content the Gq coming along mint! 👌🏼
@AussieArvos
Жыл бұрын
Thanks Jake!
@mudgutzadventures436
Жыл бұрын
Stupid question because it'd remove the ability to rotate tyres but are there front and rear specific rims in that set.
@ashleyduvall1962
Жыл бұрын
Looking good
@AussieArvos
Жыл бұрын
Thanks Ashley!
@ashleyduvall1962
Жыл бұрын
@@AussieArvos it will run rings around my Y62 once you get it completed
@PoppoPoops-lb4qu
Жыл бұрын
Awesome
@sashovasilevski
Жыл бұрын
The builds looking good. Just like new. Rims look tough but how do you get insurance with bead locks? I was looking at getting a set but was told by racv they won’t insure my rig with beadlocks. Can’t wait to see you rip up the tracks with your new rig.
@craiglewis7671
Жыл бұрын
Man. I could feel your pain. It’s all looking awesome. Just a question if anyone knows, are 35’s and a 3” legal in Victoria, and how do you get around fitting them?
@bogged2theeyeballs695
Жыл бұрын
Must be fully inspected, tested and certified by an automotive engineer. You should talk to one BEFORE you start or there is a good chance you will waste your money on parts that don't meet the engineering requirements. This video gives you a good idea of how an automotive engineer goes about the certification and all the work and paperwork involved. This is N.S.W. and while laws vary from state to state, the process of certification is basically the same. kzitem.info/news/bejne/zKGJ2WymiHV5hm0
@ZedF
Жыл бұрын
Vic's a nannie state, far from legal. I'm sure some mobs would engineer it but without it and by the book, no way in hell for any of the above. Beadlocks are a canary on their own
@roga8681
Жыл бұрын
Where are the spring cushion rubbers for the top and bottom of the springs ??
@ptime5612
Жыл бұрын
I should go to bed but then I saw this recent upload
@ligmaballz2324
Жыл бұрын
Can you do a price breakdown once your finished
@andrewsoutdoors1802
Жыл бұрын
Bugger guys, but what doesn’t kill you makes you stronger 💪
@AussieArvos
Жыл бұрын
Haha that's it , all part of it!
@andrewsoutdoors1802
Жыл бұрын
@@AussieArvos exactly…. It’s like a trip where nothing goes wrong… you never remember them.
@arian4698
Жыл бұрын
Was it all the wheels that were not bored out correctly? Cause there were still 4 wheels/tyres on the back of the Ute at 17:20.
@aaron.courtney
Жыл бұрын
The more I think about this, the more I would be interested to see what the retailer says about this. The box clearly states 110.15mm, and if it's not that all the way through the "bore" then it's not as described. All their rims are not as described, misleading, or maybe it was a Friday arvo job and they "forgot" to bore all the way through on yours. Is it only one that is like that or all of them?
@ReduxGarage
Жыл бұрын
If the supplier sent you the wrong wheels and is going to stick you with their mistake, a decent machine shop will fix up that centre bore for you.
@dirtroads.sandycoves
Жыл бұрын
Awesome vid mate, Wheres that power steering cooler from? I need to move/update mine
@joels2517
Жыл бұрын
Makes me feel better about my 4wd issues
@kylelang2755
Жыл бұрын
Always hear about this issue and people just get the centre bored out , happens on kmc and dirtylyfes
@DarrenBoxhall
Жыл бұрын
Noisiest muddies I have ever had. Not sure where all the reviews come from saying they are quiet. Cheap Comforcer CF3000 are 10 times quieter
@michaelpyke9368
Жыл бұрын
Bummer about the wheels Cobba....
@dustyfarmer
Жыл бұрын
I hate to tell you but beadlocks are not road legal rims. If your tyres slow leak with beadlocks use some Tech 735 beadseal on the beads & re-assemble them.
@MrKrueger88
Жыл бұрын
Those heavy as wheels and tyres will slow your card acceleration down big time and increase your breaking distance too ... Just saying
Пікірлер: 228