സ്വന്തമായി ഉണ്ടാക്കിയെടുത്ത components ഉപയോഗിച്ച് crystal radio പ്രവർത്തിപ്പിക്കുന്ന video ആണിത്. മലയാളത്തിൽ ഇത് ആദ്യമായാണ് അവതരിപ്പിക്കുന്നത് video ഇഷ്ടപ്പെട്ടാൽ like ചെയ്യാനും എന്റെ channel @MrtechElectronics subscribe ചെയ്യാനും മറക്കരുതേ
crystal radio amplifier ഉണ്ടാക്കുന്ന video
• simple ആയി ഒരു audio a...
capacitance meter ഉണ്ടാക്കുന്ന video
• ഇത് കൊണ്ട് capacitor ന...
follow me on
instagram
/ mr_tech_electronics
Facebook
m.facebook.com...
what is crytal radio?
A crystal radio receiver, also called a crystal set, is a simple radio receiver, popular in the early days of radio. It uses only the power of the received radio signal to produce sound, needing no external power. It is named for its most important component, a crystal detector, originally made from a piece of crystalline mineral such as galena. This component is now called a diode.
A crystal radio can be thought of as a radio receiver reduced to its essentials.[3][39] It consists of at least these components:[22][40][41]
An antenna in which electric currents are induced by radio waves.
A resonant circuit (tuned circuit) which selects the frequency of the desired radio station from all the radio signals received by the antenna. The tuned circuit consists of a coil of wire (called an inductor) and a capacitor connected together. The circuit has a resonant frequency, and allows radio waves at that frequency to pass through to the detector while largely blocking waves at other frequencies. One or both of the coil or capacitor is adjustable, allowing the circuit to be tuned to different frequencies. In some circuits a capacitor is not used and the antenna serves this function, as an antenna that is shorter than a quarter-wavelength of the radio waves it is meant to receive is capacitive.
A semiconductor crystal detector that demodulates the radio signal to extract the audio signal (modulation). The crystal detector functions as a square law detector, demodulating the radio frequency alternating current to its audio frequency modulation. The detector's audio frequency output is converted to sound by the earphone. Early sets used a "cat whisker detector consisting of a small piece of crystalline mineral such as galena with a fine wire touching its surface. The crystal detector was the component that gave crystal radios their name. Modern sets use modern semiconductor diodes, although some hobbyists still experiment with crystal or other detectors.
An earphone to convert the audio signal to sound waves so they can be heard. The low power produced by a crystal receiver is insufficient to power a loudspeaker, hence earphones are used.
#radio #crystalradio #diy
Негізгі бет ഇതൊരു radio ആണെന്നു പറഞ്ഞാൽ നിങ്ങൾ വിശ്വസിക്കുമോ??? | crystal radio making using household materials
Пікірлер: 188