I tried that setup today.not bad.was surprised.at first thought wasnt gonna be enough fluid output.not the case wetted up nice and smooth 29psi.cheers.
@spraym88
4 жыл бұрын
Glad it worked out for you. Thanks for tuning in
@justinemmons2850
2 жыл бұрын
I use mine 3 turns out for fan from fully closed and fluid almost wide open at 29 psi 1.4 for clear works great for me I use a Lph400lvx for base 1.4 tip perfect jobs Everytime also have LVB tip for certain metallics and pearl colors by far best setup I have ever used won't use anything else finish is closest to factory I've ever had
@krzysztofjakubczak7107
2 жыл бұрын
Najlepszy pistolet na świecie
@mrhow2712
4 ай бұрын
Thank you
@user-ft7pf1vl3x
9 ай бұрын
Awsome i use same gun ws400 1.3 hd tip gun set up is on spray pattern 3 full turns on fluid 2.5 turns and 30 psi
@Supanova70
3 ай бұрын
out or in from closed?
@MrRaydizzle78
2 жыл бұрын
Bro can u send the set up again full fan?? Full air and I’m new to this gun please tag me in a video
@illygarcia5002
Жыл бұрын
Saw a guy doing 6 turns on fluid ws400 spraying 29 psi sprayed from far away did a good clear job no runs
@spraym88
Жыл бұрын
Yes everyone has there own settings & techniques. These are the settings that Work for me
@andrelawrence9644
5 жыл бұрын
Doesn’t your fan split on wide open ,,I use the same gun but 1 3/4 to 2 turns on fan
@spraym88
5 жыл бұрын
Not at all! I love it
@andrelawrence9644
5 жыл бұрын
spraym 88 doesn’t it slows u down
@spraym88
5 жыл бұрын
@@andrelawrence9644 not 1 bit
@andrelawrence9644
5 жыл бұрын
spraym 88 ever used the w400/lph400 how do u rate the supernova in comparison
@spraym88
5 жыл бұрын
@@andrelawrence9644 I still use my Lph400 for basecost
@Body_Dropped
4 жыл бұрын
Do those settings work with the ls400 too?
@spraym88
4 жыл бұрын
Not sure....I only have the ws
@slv_car_refinisher6864
4 жыл бұрын
spraym 88 bro is that the iwata ws400 1.3 or the ws4001.3 hd?
@dinnyjohnson4088
3 жыл бұрын
Have you sprayed 8180?
@spraym88
3 жыл бұрын
I have not
@EclipseVT0287
4 жыл бұрын
Any idea on the setup for a supernova ls400?
@slv_car_refinisher6864
4 жыл бұрын
TIME & TIME I have noticed ls400 isn’t that great for base for solvent it’s hard to work with you can make it work but not easy. Lots of blotchy
@slv_car_refinisher6864
4 жыл бұрын
TIME & TIME I got the ls400 thinking that I was going to get great results I love it for sealer I like how smooth the paint lays but like I said lots of blotchiness and it’s king of hard to paint hoods lots of effort
@unlimitedservices3170
4 жыл бұрын
@@slv_car_refinisher6864 THE IWATA LPH 400 WITH THE ORANGE CAP SET UP IS THE BEST BASE COAT GUN IN THE WORLD 1.4 OR 1.3 YOU CAN'T GO WRONG WITH IT " THEY ARE VERY IN EXPENSIVE TO BUY " EBAY ALL DAY LONG "
@slv_car_refinisher6864
4 жыл бұрын
TIME & TIME I got myself a walcom hte 360 light the latest edition works great so far
@slv_car_refinisher6864
4 жыл бұрын
Have you used the ws400? I just got mine what set up do you use
@Supanova70
3 ай бұрын
i need help went with those setting runs every where.
@spraym88
3 ай бұрын
Try this! Close the fluid needle all the way. Then turn out 2 1/2 to 3 turns out! Fan adjustment turn out all the way, then turn in 2 1/4 turns. 28 to 30 psi
@spraym88
3 ай бұрын
And these settings are for a 1.3
@Supanova70
3 ай бұрын
@@spraym88 will do yea 1.3. I ended up using those settings on the ls and it works perfectly ty
@spraym88
3 ай бұрын
@Supanova70 Awesome man. Glad I could help.
@maudesanchez4071
22 күн бұрын
Ws400 supernova 1.3 hd , fan 2 turn from close , fluid completed open , between 2/2'2 bar , nice setup turn your iwata faster .
@killadelphia215
4 ай бұрын
First time I hear someone use it full fan
@spraym88
4 ай бұрын
I don't anymore! Now I close the material, and turn it put 2.5 to 3 TURNS ONLY. The fan I open it all the way and turn it in 2.25 turns
Пікірлер: 63