Excelente explicación acabo de comprar un RL 2009 y me sirvio mucho tu video, un Saludo desde México.
@theaccordman2074
2 жыл бұрын
Gracias brother 👍
@daviddominguez5890
2 жыл бұрын
The 07-08 Acura TL Base AND Type S came With Magnisium Manifold too, 04-06 just cane with Aluminum Manifold
@theaccordman2074
2 жыл бұрын
Yes but the magnesium use in MDX OR TL 2012 IS different to control the heat soak
@Morris1962
Жыл бұрын
I thought that the J35A8 intake manifold was also magnesium, so shouldn't they be close to the same weight? Is the J35A8 intake thinner in height? I wonder if it being thinner would allow for an MDX intake spacer under the hood of a 3rd gen TL.
@Hdlc27
2 жыл бұрын
I thought he was going to say “say hello to my little friend”
@theaccordman2074
2 жыл бұрын
🤣🤣🤣👍👍🇵🇷🇵🇷
@jcleo7120
9 ай бұрын
Nice, finally found a j37a1 (08 mdx) to buy but it had a smal TB and i couldn't find any info on that till i found this video again, now i might just start looking for an 2010-2013 instead, im assuming the 07-09 has less power...even tho i couldn't find that info, or should i just buy that 08???....well, thanks again!!
@theaccordman2074
9 ай бұрын
Mdx 07 09 is same as tls
@ns5337
7 ай бұрын
whats the inlet size of the j37a4 intake manifold, some say its 75mm some say 78mm? @@theaccordman2074
@theaccordman2074
7 ай бұрын
@@ns5337 78
@ns5337
7 ай бұрын
@@theaccordman2074so it goes 80mm in, 70mm out, back to 78mm?
@sebestiensoliz8831
Ай бұрын
I have a 2006 Acura MDX 3.5L. Can I swap out the Intake Manifold for a 2008 Honda Odyssey from a Mini van 3.7 Intake Manifold? And, do I have to cahnge the TB or can I use my stock TB?
@theaccordman2074
Ай бұрын
I dont know really due is different configuration 1 is drive by cable and the other is drive by wire I think 🤔
@theaccordman2074
Ай бұрын
The big question is WHY YOU WANT TO DO THAT?
@truejey7475
4 ай бұрын
hi . i have a 2004 TL i believe is a j32a3 . can i put the j37 intake and manifold? i want to do a swap but not sure if it will damage my engine. please let me know before i buy . thank you
@theaccordman2074
29 күн бұрын
Yes
@devin.navarro
Ай бұрын
Did the 2012 MDX SH AWD come with the j37a1?
@theaccordman2074
Ай бұрын
Yes but acura make j37a1 2010 to 2012 gen 3 jseries. New intake and big throttle body 80mm and new exit ports
@chrissellers9091
2 жыл бұрын
I have a 6 speed 03 cl type s with the j32a2, bought it with what was told was a j35 intake manifold swap, and a few more bolt-ons. I haven't really dug into it or looked to really check if the intake manifold swap was true. Is there a real quick and easy way for me to tell? Thanks
@chrissellers9091
2 жыл бұрын
Totally asked this before getting to the end and seeing where the serial numbers are lol
@theaccordman2074
2 жыл бұрын
J32a2 is 1st gen j series. There's is no better Intake Manifold for your engine that comes with it
@chrissellers9091
2 жыл бұрын
@@theaccordman2074 are there any that will mate up to that engine with modification?
@theaccordman2074
2 жыл бұрын
@@chrissellers9091 if you want good gains get camshafts with valvetrain. Hondata or other tunning device.
@frozenfireball2341
Жыл бұрын
Hey I have a 2011 Acura Rl SH J37A2. Does this mean the Acura TL SH J37A4 after market parts would fit my RL?
@theaccordman2074
Жыл бұрын
Is same intake manifold and throttle body
@theaccordman2074
Жыл бұрын
And yes all parts are intercharble
@frozenfireball2341
Жыл бұрын
@@theaccordman2074 thank you my man
@Michael_Scarn556
Жыл бұрын
I have a 2013 accord 3.5, is this worth it or compatible with newer models like mine, or should I just go with the ported 3.5 throttle body upgrade?
@theaccordman2074
Жыл бұрын
Really cuz you got already the magnesium intake manifold. Try to find the j37a1 2010 to 2012 mdx J37a4 TL shawd J37a2 RL Dont get the ZDX due the map sensor have to relocate
@Michael_Scarn556
Жыл бұрын
@@theaccordman2074 so does the 3.7 manifold offer more air flow or is it not a significant difference sense I have a newer model?
@theaccordman2074
Жыл бұрын
@@Michael_Scarn556 is more for control the heat soak. Also if you get the throttle body 80mm you need the p2r adapter
@Michael_Scarn556
Жыл бұрын
@@theaccordman2074 you’re saying that I need that throttle body adapter if I keep my stock manifold correct?
@theaccordman2074
Жыл бұрын
@@Michael_Scarn556 yes
@LuisFlores-cc4gp
Жыл бұрын
Saludos amigo compré un j37 2011 intake con trotlebody para un j35 2007 el plug que tiene en la parte de atrás que controla una mariposa conectada ala tapa de encima es igual?
@theaccordman2074
Жыл бұрын
Si si el tuyo es manual
@LuisFlores-cc4gp
Жыл бұрын
@@theaccordman2074 muchas gracias como puedo contactarte sabes mucho de estos motores tengo muchas preguntas. Gracias.
@theaccordman2074
Жыл бұрын
@@LuisFlores-cc4gp de donde eres
@emilcortes9786
2 жыл бұрын
Which is the best j37 intake manifold for 08 tl type s
@theaccordman2074
2 жыл бұрын
J37a2 RL J37a4 TL SH AWD J37a1 2010 to 2012 MDX
@distr1c796
Жыл бұрын
@The Accord Man which one should be a direct bolt on fromt the ones you mentioned?
@RuulOz
2 жыл бұрын
Good! i buy a RL 2009 and is Beast
@user-nu5qr6wh7g
Жыл бұрын
Very misleading measurements. The TB is tapered. J37 only around 69mm on the back of the TB.
@theaccordman2074
Жыл бұрын
J37a1 from mdx 2007-2009 it is 69mm. BUT J37A1 FROM MDX 2010 2012 IS 80MM J37A4 TL AWD 80MM J37A2 RL AWD 80MM
@hondalover213
Жыл бұрын
Why does the TL 3.7 intake manifold cost more then the MDX is the TL Mani better?
@theaccordman2074
Жыл бұрын
The tl 3.7 and mdx 2010 2012 are same magnesium 80mm throttle body
@hondalover213
Жыл бұрын
@@theaccordman2074 great save some money I just finished finish speaking with someone from p2r and is slipped his mouth he wasn't supposed to tell me but he's like oh well they're coming out in 6 months with a super flow manifold for the j series engine .
@jorgeovalles2804
Жыл бұрын
Hey men do you know if the runners off a j37 the same size as j32 runners
@theaccordman2074
Жыл бұрын
J37 are oval-shaped vs j32 are circle. J37 runners only fit to the J37
@jorgeovalles2804
Жыл бұрын
Oh ok thank you men i appreciate your help
@kensmith3257
Жыл бұрын
Will this fit on 2015 Honda Accord Touring 3.5?
@theaccordman2074
Жыл бұрын
Yes
@god-likesystems985
Жыл бұрын
Hello J Seious!
@poolhalljunkie100
Жыл бұрын
1 question, have 6th gen j30 and what would be best fitment in regards to runners, manifold and etc upgrade that will fit under the hood ? Thank you
@theaccordman2074
Жыл бұрын
Is about combination you can put cams and Smpperformance intake manifold kit. Runners throttle 80mm intake manifold all PNP
@jacksan8026
Жыл бұрын
Brother will J37 throttle body fit on a j35 intake manifold?
@theaccordman2074
Жыл бұрын
You will need the p2r spacer for make it fit. Make sure is the 80mm other wise is same as yours
@jacksan8026
Жыл бұрын
@@theaccordman2074 👍
@jacksan8026
Жыл бұрын
@@theaccordman2074 brother important question please is j37 from 2007 MDX manifold the same size on a j30a5 in terms of body
@theaccordman2074
Жыл бұрын
@@jacksan8026 No! J30 and j32s have the butterfly build in and no top plate. J35 and j37a1 2007-2009 is like a stage 2 with top plate butterfly. 68mm throttle body
@theaccordman2074
Жыл бұрын
@UCFvDG2SGkSeZASrJR497J6g try to get the 80mm throttle body first. Without that is worthless
@ITSHONDEEZY
2 жыл бұрын
Man I need your help would a 9thgen intake manifold fit onto a accord v6 8th gen
@theaccordman2074
2 жыл бұрын
Thats 4 cylinder bro.
@ITSHONDEEZY
2 жыл бұрын
@@theaccordman2074 no I’m talking about a 9th gen accord v6 coupe that I just bought it of ove
@theaccordman2074
2 жыл бұрын
@@ITSHONDEEZY ohh sorry is a j35y2?
@ITSHONDEEZY
2 жыл бұрын
@@theaccordman2074 na it’s of an auto 2016 going into a 2011 accord 5 auto
@theaccordman2074
2 жыл бұрын
@@ITSHONDEEZY is v6
@hectorjimenez4684
3 жыл бұрын
How is the J37a1 coming along?
@theaccordman2074
3 жыл бұрын
Good! I just put bc camshafts and A4 throttle body and intake. Not tuned jet
@hectorjimenez4684
3 жыл бұрын
@@theaccordman2074 nice brother! I just got my j37 intake manifold, runners and throttle body PNP from (SMP)@chony1703 for my j37a2 going in on my 04 accord. He did an awesome job!
@theaccordman2074
3 жыл бұрын
@@hectorjimenez4684 eres boricua?
@hectorjimenez4684
3 жыл бұрын
@@theaccordman2074 hispanic hermano
@javiermontes3777
2 жыл бұрын
@@theaccordman2074 any different in gas mileage p
@jseriestech
Жыл бұрын
do you still have it for sale?
@theaccordman2074
Жыл бұрын
Nop
@jseriestech
Жыл бұрын
@@theaccordman2074 dang ok thanks anyway in the video you said that the other manifold is better for heat control but aren't they both made of magnesium !
@luiscastillo4206
2 жыл бұрын
Hi you still got it for sale
@theaccordman2074
2 жыл бұрын
Nop
@robertalicea5585
2 жыл бұрын
Do you know if it's worth putting the 80mm J37 throttle body on a j35y2
@theaccordman2074
2 жыл бұрын
Of course bro with the 4 inch intake
@robertalicea5585
2 жыл бұрын
Will it bolt up to the manifold or do I need an adapter
@JayyStudio
2 жыл бұрын
Do you still have the 3.5 for sale?
@theaccordman2074
2 жыл бұрын
No sorry
@bindthedevilloosetheangels
Жыл бұрын
more confused now then before. .
@theaccordman2074
Жыл бұрын
Why? What is your confusión? Everything is detailed explained
@bindthedevilloosetheangels
Жыл бұрын
it's just a lot of fluff in the video. I have lots of kids and work lots of hours. It would just be easier to be able to see a list of years and models compatible for a j32 and to know what ones have the largest diameter throttle body. it's hard to keep track in a video that is kind of spread out with him saying things and correcting himself and me not knowing what's right the first thing he said or the second. Guy seems to know his stuff though.
@theaccordman2074
Жыл бұрын
@@bananadarks16 bla bla bla thats your asian language 🤣🤣🤣
Пікірлер: 106