Oh my God. Spent 2 hours taking and putting my machine back, close to tears. Found the solution literally 31 seconds into this video. Thank you 😭
@sophalophe
2 жыл бұрын
Same here...! Hahaha xD
@tyfah14
Жыл бұрын
Me too. I was close to crying too
@raeheil4043
Жыл бұрын
Me three!! Thank you so much
@josephbradley6430
Жыл бұрын
I feel so much better about myself knowing I’m not the only one. But honestly it has to have been twenty years or better since I sewed anything
@PatchouliPuff
Жыл бұрын
I'm at work now, and I CAN'T WAIT to get home to see if this is what effed me up yesterday. I was so infuriated it took all my control to contain myself.
@phyllisdippert2216
Жыл бұрын
Was in tears at the thought of losing this machine. The bobbin winder was engaged! Thank you so much!
@Celinemorphine
7 ай бұрын
Ughhhh I wish this was my problem… the bobbin winder works but the needle part isn’t 😭
@jessicaparadis3331
Ай бұрын
Mine tooo argh
@deedeekim1940
2 жыл бұрын
Omgosh.. what an idiot I was!!! I immediately went to my sewing machine and … yes… the bobbin winder was engaged. I looked at everything but that!! I am a newish sewing and just decided I want to try making a 9 block vanishing block and thanks to you video I can try it!! Thanks for posting what may seem simple to others, but still needs to be stated for newbies like me!
@peachysantos4779
Жыл бұрын
thanku for this comment. i wasn't able to use my machine because i thought it was stocked up. came to this video and reading comment while watching. went over my machine and it was indeed engaged🤦🏽♀️
@leslieblauer5297
Жыл бұрын
Thank you so much. I've spent over an hour trying to figure out what was wrong. Less than 10 seconds and you solved my problem. Thank you again.
@maureenweeks9725
Жыл бұрын
Thank you. After fiddling around for an hour watching KZitem videos I was at a loss as to why the wheel wouldn’t turn. My husband had filled a bobbin prior to this. I would have never thought that it hadn’t released, but that’s exactly what happened.
@mimsley5
Жыл бұрын
omg!!! I bought a new machine because mine wouldn’t move… started watching your video - it WAS my bobbin winder engaged!!! thank- you!! bringing my new machine back! thank you thank you!!!
@Lola-fn5ws
3 ай бұрын
I literally took my sewing machine apart.... I spent hours and I am a new sewer so i nearly gave up on the whole plot! You saved my new hobby and I thank you immensely!!!!❤❤❤❤❤❤❤
@izzyzanin4047
8 ай бұрын
You saved me such a headache. My bobbin winder was engaged. Such an easy fix. Thank you
@hellbells90
7 ай бұрын
I was so close to taking apart everything on the sewing machine and came across your video. Thank you!!
@bornfree0507
2 жыл бұрын
Oh thank you so much for showing me the bobbin winder switch!! I couldn’t figure out why the wheel would not turn counter clockwise very far so I was thinking something jammed it. I am back in business after months of not using my machine. God bless you!!
@InStitches
2 жыл бұрын
I'm pleased it helped. Enjoy your sewing!
@mariaguates
2 жыл бұрын
Same! I disassembled my whole machine for no reason
@thenunlover5828
Жыл бұрын
THANK YOU I HAVE BEEN TRYING TO SEW BUT MY NEEDLE WOULDNT NOVE I WAS SO CONFUSED THIS VIDEO SAVED MY TIME
@bizuenamariam7678
Жыл бұрын
Wow life saver 🙌 I spent time wondering I was even planning on taking it to the repair shop till u decided to try y luck on KZitem
@NarrowView-us1rt
Жыл бұрын
This video is AWESOME! I was stuck for an hour... the problem was fixed in 30 seconds!
@sarahv2548
7 ай бұрын
I am like everyone else!! I was FLIPPING OUT because I have alterations due tomorrow and I couldn't understand why my machine wasn't working. It was the bobbin winder. thank you thank you thank you
@LilaneVillalta
18 күн бұрын
September 2024,I'm glad I come across this video,I almost dismantle my whole sewing machine😅,thanks for this it saves my time
@NadineBate
8 ай бұрын
I spent an hour trying to fix my machine- I just had the bobbin winder on 😂 you my man are an earth angel😂
@elizabethpearson7447
Жыл бұрын
Very grateful for this video! I too took the back off my machine and was baffled. I had not used my machine for a long time and tried to sew. The machine sewed for a little bit then got stuck.....every time 🤣 Great lesson for solving a problem: Assess the function of everything that you can see, even if it appears to be irrelevant. Then delve deeper.
@LetsBeResponsible
2 жыл бұрын
Thank you!! What a relief and what an easy fix!
@LetsBeResponsible
2 жыл бұрын
I was about to spend $$ getting it repaired, after watching your video, I was able to just move it in 1 second and problem fixed! Thank you!
@tacomahooligan
6 ай бұрын
First off, thanks for getting to the point without showing off your dog or some crap intro. Secondly, you saved us agony. Subbed!
@bunnyfernwood
9 ай бұрын
You’re a lifesaver! Thank you!
@bastelbutze
Жыл бұрын
Didn't use my machine for five years because I thought it was broken :D. Thank you so much
@rhibread11
11 ай бұрын
LOL Ohhhhh good grief!!! Thank you so much for the first 30 seconds of this video. It didn’t even cross my mind that the machine wasn’t set properly 🤪
@AngelinaKaul
Жыл бұрын
Thank you, thank you thank you so much. You saved my life in 10 seconds!!! Following you!!❤😊🙏
@MetroStitcher
Жыл бұрын
Thank you thank you! The dang bobbin winder! I took the hand wheel cover off and saw the problem where it was being blocked from turning but did not know it had to do with the bobbin winder being engaged. I wish Juki made a note of that in the Troubleshooting section of the operator’s manual. Glad I stumbled across this video or I would have hauled the machine in to a repair shop.
@InStitches
Жыл бұрын
Good point. I have people bring machines to me to be un-jammed and this is often the cause. Thanks.
@suachuamaymay
3 жыл бұрын
You are very detailed and easy to understand
@InStitches
3 жыл бұрын
Thanks.
@redlotusacupunctureUS
Жыл бұрын
Amazing! Laughing to find this after a bit of time spent stuck!
@debbiestimac5175
Жыл бұрын
OMG! I have my machine taken half apart, getting back into a bit of sewing for a costume and thought I had a broken belt or something serious, nothing moved, motor ran but acted like it was in neutral, revving a car engine and going nowhere. Could not figure out how to engage the drive head, nothing worked and THEN this video, solved it in fifteen seconds! Let me say, I owe you big time for this! If you are ever in America I'll buy you a drink! Cheers and thank you again! Bobbin winder... it was the bobbin winder! Blonde I am for sure! 🤣
@shamsbt
Жыл бұрын
Thank you so much!! You're right it was the bobbin winder that was engaged in my machine!
@loubearrose8103
2 жыл бұрын
I was just in the middle of sewing a bag and my needle and my bobbin got messed up! This is so helpful! Thx!
@raineydaygirl5970
3 ай бұрын
So, if the bobbin winder spins very slowly, or not at all…is it typically the rubber tire needing replacement? I finally got it to stitch, but I cannot make a bobbin anymore. Tried to remove cover but no luck accessing rubber; hoping there’s a # on it. I cannot find my model online either, for the rubber tire size; Euro-Pro X 7130. Is there a compatible make/model?- they never name mine on Amazon or sewing parts sites. Frustrated.
@moniquek5156
6 ай бұрын
Thanks, I have this machine (Bernette 65) and the stitch selector wheel is jammed. Any tips?
@robinbucci6446
11 ай бұрын
Unfortunately this did not solve my problem. The bobbin was not engaged and the wheel still won’t turn. 😢
@InStitches
11 ай бұрын
Hi. It must be a problem somewhere else in the machine. Try removing your bobbin case and looking for thread tangled in that area. Could be any number of issues causing it. If the machine hasn't been serviced recently it may need oil and clean. Thanks.
@HeyItsTra
11 ай бұрын
The Bobbin winder!!!!! I didn't even THINK of that! lol It's always the simple things you overlook. Yeah, I had it apart and oil and everything. On the brightside, I needed to do maintenance anyway. LOL Thank you! Thank you!
@HistoireHistoria
6 ай бұрын
Omll tysmm... Got a second hand machine and thought that I would have to go and take it to the repair shop but lo and behold the bobbin winder was engaged
@graceg751
2 жыл бұрын
What even when bobbin winder is in not winding position? Wheel still feels tight when you turn it. What is the issue in this case? Wheel should be freely turning right.
@anniecurtis8147
2 жыл бұрын
Same
@graceg751
2 жыл бұрын
@@anniecurtis8147 After going through lot of other (Indian Hindi) KZitem videos , I found the issue with my sewing machine. It was thread broken in the shuttle. Mine is basic Singer Start model where removing shuttle and cleaning was easy. It was on two clips. When I removed the shuttle to clean I found lot of thread broken and stuck there. Also all the cotton like stuff. I cleaned all and found my wheel was free. Finally I oiled it and it's good to sew again.
@dylanwong7558
2 жыл бұрын
@@graceg751 hi can u show me a video how u fix it
@graceg751
2 жыл бұрын
@@dylanwong7558 kzitem.info/news/bejne/koyYnImbcJ9mnn4 since this is my sewing machine model. Hope this video will help you.
@genericname6669
7 ай бұрын
I got excited and rushed to my jammed machine hoping it was the bobbin winder. Sadly not. So guess I am going to make a trip to the service place tomorrow. The hand wheel is not turning using food peddle and when I manually turn it, it does but with resistance. I also oiled the belt. Not much difference.
@MaracasEmbroidery
5 ай бұрын
🙏🙏🙏 Thank you so much! I was ready to throw this machine in the dumpster. YOU saved it! XOXO Really, thank you so much!
@AhmedAli0
Жыл бұрын
Hi I have a singer Simple machine and when I engage the bobbin winder. The hand wheel is not turning WHICHI IS CORRECT But the clutch is no properly working and the belt also jammed. So matching is not able to thread the bobbing winder and it is jammed basically. any solution, please tell me
@lindablake9540
2 ай бұрын
My bobbin winder is disengaged on my singer 1409. But the sewing parts do not function, plus the motor hums, when I engage the foot pedal.
@vierakanjoka4194
6 ай бұрын
I disengage my bobbin winder and still my hand wheel is not turning or moving freely, any other advice please
@averagecoffeecuponthetable1127
6 ай бұрын
My machine is completely fine However the needle isn't turning when I step on the pedal, it will work when I Turn the handwheel My bobbin winder is the first thing I checked Nothing is engaged with the bobbin or bobbin winder I don't understand the issue can you help me?
@annamendoza3857
Жыл бұрын
When i push the button on my 6800c singer to bring the needle down to start sewing the needle will not move up or down. But If i move the knob it will move the needle up and down. How do I fix this.
@rillacarpenter3928
Жыл бұрын
Any other reason for a jammed wheel?
@CandornadiaTV
2 ай бұрын
Pls do a video of the down part not roll to change partern
@marinazagrai1623
6 ай бұрын
I don’t have this problem…bobbin winder is disengaged. The wheel gets blocked as is the needle so I cut the thread from the top and find broken thread inside or wound around the axis for the bobbin (I don’t know what it’s called - the metal stick that holds the bobbin).
@rachaelparker3064
6 ай бұрын
I have the exact same problem, I'm on day 4 of trying to fix it
@marinazagrai1623
6 ай бұрын
@@rachaelparker3064 Firstly, have patience, these machines don’t operate the same everyday. I know it sounds silly but that has been my experience. So, I saw in another video to check your tension (we tend to put it on the smallest, so put it on 3-4). Then, with my machine I noticed that certain stitches work for a certain length then they mess up. I don’t have an expensive machine and I also inherited it from my sister who bought it at a garage sale. Try to enjoy making your project, regardless of any problems it may give you…when it starts getting you mad, change your thread and try the same stitch on a “fat quarter” and try using different threads so you can see where the problem is (this is the most helpful by far).
@karenbull1895
9 ай бұрын
I have what seems to be the opposite problem... the winder is jamming before it has done one revolution... maybe the clutch is the issue?... when I disengage the winder and turn the machine using the wheel it feels heavier than normal as well. I had just finishe a massive woollen project...
@annrodrigues5143
Жыл бұрын
Can you please help..my machine needle was bent due to stitching a thick jeans fold and the needle is now touching the bottom and not catching the thread. (Janome 808 A)
@Excessive03
7 ай бұрын
This video saved the day
@jagilo9677
6 ай бұрын
Omg! I took my machine apart before I saw this video. Slap on my forehead moment. The bobbin winder was engaged!
@PatchouliPuff
Жыл бұрын
So HELPFUL and CLEAR! Thank you!!!!
@evanaswiftie4-evah743
6 ай бұрын
What if it's Not the bobbin filler engaged?
@kylekuhn5882
Жыл бұрын
My singer simple machine I have to hold the bobbin winder in the disengaged position manually as it no longer locks, suggestions?
@iniseradinitoga635
Жыл бұрын
I still cannot move the jammed wheel of my singer 2250 ..have tried solution in this video...no luck...please help
@eljacoby
Жыл бұрын
Wow… I’m an IDIOT! 🤪 Thank you for saving me a trip to the sewing machine shop!
@NoorAndsisters
Жыл бұрын
omg you saved my time ..best of luck
@oro3510
Жыл бұрын
you are a life saver sir
@COJAZZ3
Жыл бұрын
It was my bobbin winder. Thanks!
@samirsabih2177
3 жыл бұрын
شكرا جزيلا نحن فعلا نستفيد من هذه الفيديوات
@TheMjaner
6 ай бұрын
Wowwww thank you so much GodBless
@bthompson2284
2 ай бұрын
Thank you!!!
@marthanahom4976
Жыл бұрын
OMG you saved my life you the best thank you sooo much ❤️
@anastasiabm7522
Жыл бұрын
I took my sewing machine apart 🤣😅 you saved me thank you!
@CYoung-bf5uz
Жыл бұрын
How many OMG are you getting? MD, PhD... no matter! Got me!!!!! Thank you soooooo much!!!!!!!
@souadzakri6640
2 жыл бұрын
omg ..what a relief...thank you so very much
@marineships1369
2 жыл бұрын
Thank you so much! You just saved me a maintenance bill xD
@ravichavan7513
Жыл бұрын
Thanks a lot for this video.. 🌹👍🌷
@paulinemcleggan7585
2 жыл бұрын
I have a singer fashion mate 3337 every time (or almost every time) I do reverse stitch at the beginning of my sewing the machine jams. However the fabric seems to jam in the speed dogs. Help please. This is a brand new machine
@ericaangela1
Жыл бұрын
THANK YOU.
@taniasultana2866
Жыл бұрын
My singer sm024. Mesin Same problem.. My mesin Pls help give a new video.
@times_22admin
11 ай бұрын
Thank you!
@user-dh8gi6wi6d
5 ай бұрын
So how to you wind your bobbin then ?
@markogle1949
Жыл бұрын
You’re the man!! Thanks!
@sondrabrown442
Жыл бұрын
Thank you! You solved my problem!
@vhslearning1
9 ай бұрын
saved my life.❤️
@nelmadacunha4
Жыл бұрын
God bless you, thank you so so much
@Starjasmin-h6z
Жыл бұрын
Can you help my sew machine does not speed up sewing jus goes really slow
@shirasezan
Жыл бұрын
thank you
@ellen-daile2717
Жыл бұрын
Very helpful!
@petehaug
Жыл бұрын
THANK YOU SO MUCH!!!
@Bluek333
2 жыл бұрын
Hello , my singer sewing machine heavy duty I just purchased it brand new but when I attempt to start sewing it’s almost like the needle won’t move ?? I made sure the bobbin lock isn’t engaged so it’s not that and everything it threaded correctly and the power works it’s just when I am ready to sew it almost sounds like something is blocking the machine from moving ??
@InStitches
2 жыл бұрын
Not sure exactly what that would be. I would go back to the people you bought it from as it will be under warranty. Thanks.
@messikhan7307
Жыл бұрын
Oh thank you you save my time 🥰🥰
@portiamafrika225
9 ай бұрын
Thank you very much, I was about to lose my mind....
@TraceySusanMixedMedia
2 жыл бұрын
Awe Thank you so much , I had no idea
@Sol-jj5ov
2 жыл бұрын
OH! Thank you! OMG! This was such a relief!
@sassyk2012
Жыл бұрын
Thank you that was my exact problem
@novapungus9288
2 жыл бұрын
Mine is still doesn't work even after follow your instructions😭 its so frustrating! Hikssss
@noraansah9156
7 күн бұрын
Good video did not help me. Bobbin winder is not engaged yet my handwheel is jammed so not sure what up to do. This has happened before and got so frustrated I did a no no and turned it away from me 😮
@patriciaaubreypacis1738
9 ай бұрын
LIFE SAVER
@pjschuster61
Жыл бұрын
I am looking for a little more advanced fix for a jammed flywheel other than this easy fix.
@adesewaadeyeni2257
Жыл бұрын
Hope you have found solution to the Jammed wheel? I am experiencing jammed wheel issue now. Please, kindly share your knowledge. Thanks in advance
@gennysample4618
6 ай бұрын
It's NOT the bobbin winder. The needle sews but stays in the same place. What can I do?
@raineydaygirl5970
3 ай бұрын
Just a thought…make sure fabric is being grabbed by the feeder below plate. It sounds like you have no grip on fabric?
@barbaraharp7261
3 ай бұрын
how do i remove the wheel on my sewing machine
@aurorabelmores178
9 ай бұрын
Tysm!
@rchirico1
Жыл бұрын
Ok so what to do if your bobbin winder is not engaged but machine still jammed?
@InStitches
Жыл бұрын
There are many causes for a jamming machine. This video shows one of the causes as explained. Thanks.
@lwandymadzinane9835
Ай бұрын
My needle is stuck,it cant move,please help
@lalitabhave813
2 жыл бұрын
I have singer sewing machine fashion mate 5560 suddenly it has stopped needle bar is not moving as well as wheel is not moving and needle stake in bobbin tried to removed needle still not moving needle bar please explain what to do statching is my hobby I am 82 years old please help me.
@lalitabhave813
2 жыл бұрын
Expecting reply.
@falbalalagauloise410
6 ай бұрын
omg thank u !!!
@larryroderick7886
2 жыл бұрын
Have singer 1411. Bobbin case is up where it cannot rotate. Machine is locked.
@_el3na_
Жыл бұрын
Same, did u find a solution?
@ceblair4974
Жыл бұрын
I checked the bobbin winder and it was in correct position for sewing, but hand wheel still does not turn. I am so frustrated 😢
@InStitches
Жыл бұрын
Sound like you need to get your machine to the nearest repair agent. There can be many causes of this issue. Thanks.
@ceblair4974
Жыл бұрын
@@InStitchesmy sewing machine has been fixed by my son who knows nothing about sewing machines. There was a loose thread caught behind the bobbin case. He was able to remove thread and, yea, my machine now works great. Thank you Mickey so much.
@lifeasweknowit8798
7 ай бұрын
My machine screws are so tight how 3:17 to loosen them
Пікірлер: 163