Just installed the SPY 5000M 2-Way Motorcycle Alarm System. Comes with Microwave/Proximity sensor - Shock sensor - Remote Start & Disarm - LED light - parking light notification connections and 2 FOBs (keychain remotes) WARNING!!! DO NOT KEEP YOUR REMOTE attached to your motorcycle key. The vibrations while riding is HARMFUL.
FAQs:
Yes, this alarm works. I am/was not paid to endorse this product. The proximity sensor is adjustable and haven't had any issues. The shock sensor is adjustable too. It can be overwhelming to install once you see the installation guide but if you attack one wire at a time, it's less intimidating. Red, to your battery. The black (short) labeled ground to your frame, the 2 yellows to your parking lights and you have a functioning alarm. Connect the LED, SHOCK SENSOR, PROXIMITY SENSOR, and SIREN and you're good to go.
Connecting the remote start/disarm should be done by a professional or through trial and error. Have back up fuses, a (cheap) multi-meter and follow the wires from your (start button) and (ignition -key switch) and you'll figure it out. Buy extra wire... about 4 - 5 feet of red and black wires incase you need to extend some of the attachments. Zip ties and electrical tape needed.
Feel free to ask any questions and I'll do my best to help out.
zmc.com.sg/ - for more info
Email: Kennethlow@zmc.com.sg - The General Manager that helped me.
Basically, you'll need...
Electric tape to wrap/hide the colored wires after you install everything. ( 1 or 2 rolls.) - Also when you connect extra wires together.
Wire splicers to cut the plastic shielding to expose the wires.
Wire connectors (optional)
Extra fuses (like the ones included) in case you accidentally blow a fuse installing the alarm.
Zip-ties to secure the wires together and/or to run them along your frame. (The zip ties worked awesome to secure the antennae
Alcohol wipes to clean areas of your bike where you are going to attach/install parts of the alarm.
Double sided tape. (about four 2 inch squares... these work good to hold the alarm parts to your plastic fairings.
Extra wires ( one small roll of red wire and small roll of black wire) I used this to extend the wires on the alarm. Depending on where you mount the individual parts of the alarm, some of the wire thats included isnt long enough. This will come in handy.
Be creative and keep in mind, you don't want anyone to see the alarm or the wires. (That's why I use electric ape to wrap the wires so it looks like its part of the bike's electrical wires.)
Good luck, hope that helps.
Негізгі бет Jan 2011 - SPY 5000M 2-Way Motorcycle Alarm (Msg me for help.. I answer all questions)
Пікірлер: 445