Many years ago my dad told me that pop out windows was a $35 option.
@Sam_Mebane
Жыл бұрын
Worth every penny too!
@nelsonluiznascimentoportes1780
Жыл бұрын
Por favor, onde encontro para comprar esse dispositivo Pop Out ???
@Sam_Mebane
Жыл бұрын
Como decimos en el video - en línea en jbugs.com - www.jbugs.com/product/113898400A.html
@lehuadefiesta7986
Жыл бұрын
I recently purchased this for my 67 bug. The latch and glass is completely different. My latch installs to a hole in the glass. Inspecting further, because there’s no instructions, I see a flat “cotter pin like” that looks like needs to be removed for me to take apart the latch to attach to hole in the glass. How do I remove and install that section without damaging it?
@Sam_Mebane
Жыл бұрын
The latch on 1965 and later pop outs is attached with a pin that goes through the glass on the outside, and is held to the latch on the inside with a circlip. That clip needs to be removed to separate the latch from the pin if it is in place.
@michaelMMs
2 жыл бұрын
I wonder if this is possible for 99 civic hatchback. Originally they dont come like that. But i like how old hondas have pop out side glass.
@Sam_Mebane
2 жыл бұрын
We have no clue, we sell VW parts. We don't offer anything for Hondas.
@popclutch_100
9 ай бұрын
Would ypu happened to know if this window bracket fit on my mini truck...
@Sam_Mebane
9 ай бұрын
I was talking with a guy that worked at a junkyard. People would regularly asked him if any particular seat would fit in any particular car or truck. He'd always say "Absolutely, open the trunk and drop the tail gate and it will fit in!" That being said, we have no idea, the pop out windows and parts we offer are for Vintage VWs. Could it be modified to work in your application? Maybe, but that's up to you and your abilities.
@crosserefuscaoliveira2071
6 жыл бұрын
Boa noite muito o vídeo gostei
@Sam_Mebane
4 жыл бұрын
Que bom que gostou, durma bem!
@BlueLineAquatics11
2 жыл бұрын
Hello, do you sell the screws to attach the handle to the frame. 2:43 in your video is the screws I’m talking about. Thanks
@Sam_Mebane
2 жыл бұрын
No, not at this point.
@jemcnair76
Жыл бұрын
How is that sheet metal a hinge? Am I missing something, or does that metal just flex?
@Sam_Mebane
Жыл бұрын
That's it, the metal just flexes a bit.
@jemcnair76
Жыл бұрын
@@Sam_Mebane Thank you. This is a job I'm doing in the next few weeks when I get all of the parts, and I was confused. I guess the metal can take many flexes without breaking... but then, it wouldn't move much, would it? More of a spring than an actual kink in the metal.
@Sam_Mebane
Жыл бұрын
@@jemcnair76 correct, the amount of deflection or movement needed from the hinge is only a couple of degrees. So that little bit of flex from the hinge is all that is needed.
@jemcnair76
Жыл бұрын
@@Sam_Mebane I thank you, my friend.
@jemcnair76
Жыл бұрын
@@Sam_Mebane I did this job on one of the windows, today. New outer seal, old hinge, new hinge bar, on a 1973 Super. It only took about 30 minutes and can be a one-man job. A tool that was quite useful was a suction cup with handles... the kind you use on floor tiles and for glass work. I haven't done the latch yet, as I haven't received them yet, but expect (I'm saying this to other readers, not you, Mr Mebane) about 30 minutes to install a new outer seal and screw in a new window... pinch welt, and hinge cover. My car is a '73, so I already have all of the holes from the factory. Another thing for people doing this the first time, pull the regular quarter windows long ahead of time in case you find some rust you have to kill off, prime, and paint. I pulled my windows early and found just that. A previous owner had used a razor knife to cut out the old seals at one point and scored up the metal on the outside of the car. For those taking out the old windows, just cut the seal ON THE INSIDE bottom (don't score the metal there, either) and press out the glass. Pretty easy and another one-man job.
@dylanpadilla5787
2 жыл бұрын
Can you reuse stock windows? Or do you have to buy the windows in the kit?
@Sam_Mebane
2 жыл бұрын
Popout glass is a different size than non popout glass.
@steelavocado1
2 жыл бұрын
You could always make your own pop outs, but yeah, the glass is different.
@ronnyekornas5199
4 жыл бұрын
Hei do you have pop out window kits for a 61 vw beetle?also looking for a kit for the front window.
Пікірлер: 30