Hello I have been using the tag-on flex from JCID since 5 months ago and I think they are pretty convenient, but there is a problem with the models 11 Pro and 11 Pro Max, when I do the steps to put the new battery with the old flex id to read 100% into the mobile phone everything is fine but after almost 1 week using it, the phone instantly turns off and since then the phone always shows 1% percentage, identify the battery as non original and turns off every 5 minutes. Note: When I do the procedure to read the 100% maximum capacity I take out the tag-on flex, I mean... Is the tag-on flex designed to let it installed on the phone?
@jakkidudu
Жыл бұрын
Hello. Why the title says " for 11Pro Max " but in the video the battery is plugged into the 8-XS max slot?
@Rick-tr3gy
Жыл бұрын
Because the iPhone 8, 8p, X,XS,XSM,11P,11PM use the same battery connector :) there is no tag flex for iphones prior to the iphone 11 pro
@michealfunickrr3717
2 жыл бұрын
@JC Programmer, JC c3-box needs to address this issue: iPhone models 1533 and 1588 are both iPhone 6S's mine are both 32gb however I cannot transfer a memory module to the other because the model number is different. I've gone to Settings>General>About and the model is different!!! I can change the serial# with this c3-box but I cannot change the model number. All I want to do is transfer the memory to extend the life of the phone. JC please allow us to change the model number. I feel really upset that even after having the same phone I cannot extend it's lifespan after the flash memory has been gotten a lot of wear and tear over time. There are KZitem videos of transferring data to a new memory chip. I feel that I should be allowed no matter what GSM + CDMA model number it has if it's the same line.
@eveharcore8348
Жыл бұрын
i do like this step but i have a problem,the health already shown 100% but the text service still appears...what must do next
@DM-wu9ik
2 жыл бұрын
Do you leave the tag-on permanently on the revised battery?
@techvlogsph4909
2 жыл бұрын
Im wondering as well
@dennis-br6vr
2 жыл бұрын
@@techvlogsph4909 yes you have to leave it on the battery.
@imansmkbdp
Жыл бұрын
Can tht jc tag on be used on qianli programmer?
@francescosaccuta6805
2 жыл бұрын
Does the tag on flex, have to be permanently applied to the new modified battery?
@dennis-br6vr
2 жыл бұрын
Yes.
@Halders1982
Жыл бұрын
@@dennis-br6vr why? It also works witgoud after the process ?
@Beast_Son_Gohan
Жыл бұрын
Somebody can help me I remove the BMS from iPhone XS Max after I welding new battery cell on it the programmer says it has 15mah what’s cause the issue? In the Jc repair Programm it shows the same and now data and I can’t write any data on it
@Nasa-Space04
2 жыл бұрын
Dear jc team i have 11pro repair flex of jc but dont know the process please share
@ilonagouyon1489
2 жыл бұрын
This way does not woork actually, i already have 66%
@SpeegleSphere
Жыл бұрын
WTH, show the orientation of the battery
@yhan_saintsantiago554
2 жыл бұрын
Do you sell serial numbers?
@michealfunickrr3717
2 жыл бұрын
Please leave the comments section, you are obviously trying to avoid using the serial you already have.
@iavenuemobileshop
2 жыл бұрын
After completing all steps battery is showing 100%health i am done all after restarting phone i am getting problem sometimes phone switched off automatically sometimes faceid not working sometimes phone is getting restart plz help me
Пікірлер: 20