AXLE SEAL INSTALLER TOOL REVIEW kzitem.info/news/bejne/pqqNsWibhWWqpo4
@puppacito
5 жыл бұрын
Very very nice, hey I have an 04 jeep grand Cherokee with a Quadra trac 2 and my configuration looks almost the same as yours. Will my bearing carrier come out easy like that too? Just those 4 bolts and slide it back?
@barricadegarage5361
5 жыл бұрын
@@puppacito yes
@montytaxara4328
6 жыл бұрын
I’ve watched a lot of Jeep maintenance videos and yours is just as good or even better than a lot of the bigger channels...nice job!
@barricadegarage5361
6 жыл бұрын
colton taxara Thank you
@hiphopcroaks24
3 жыл бұрын
100% agree the straight forward way he talks and the get it done attitude is awsome
@Elite_Nobes
5 жыл бұрын
Great tutorial man very detailed with no bs. Well done 👍🏼
@imperialfleet
5 жыл бұрын
Genius idea driving the new seal with the old seal. I'm going to try that, thanks.
@seanhuggins4086
3 жыл бұрын
Are you kidding me? Use the 36mm axle nut socket that I ALREADY OWN? Instead of buying the special tool, dude you are a friggin genius. You’re the only one I watch now. Thank you.
@CaudillPat
4 жыл бұрын
Dude, you’re making my life easier with every video you produce. Thank you!
@joshuacripe1514
5 жыл бұрын
Great video man !! Simple tools for the average Joe at home.. For anyone watching this applies to the XJ , ZJ , WJ, TJ and all us Jk mall crawlers. Same procedure.
@adamkuresa6607
4 жыл бұрын
Bro. Respect. I don't even have a jeep I just like how I understand the process better now. You the man
@Harpoon2theRescue
5 жыл бұрын
Best tutorial I've seen regarding Jeep axles seals.
@thecherokeechannel688
6 жыл бұрын
I'm new around here. So imma take a look around these videos and make myself comfortable. Great video man. 🖒
@genelandin1577
3 жыл бұрын
By far the best how to videos ever! You're detailed and not long winded!
@captainpowers3026
3 жыл бұрын
These videos are helping me out a lot with my 97 ZJ! They're easy to follow and always on point 😎
@michaelusher5400
2 жыл бұрын
Great video fella! Socket sizes for the seals and torque values are a huge plus! Thank you for taking the time to do this vid. Pretty confident now to do mine!
@walther9161
4 жыл бұрын
One of the best ones I’ve seen researching how to do this job... good job!!
@njseashorechas2698
3 жыл бұрын
Excellent to the point content! You dont get lost rambling about details like many on KZitem!. The best I've seen on here!
@fredrickhowkjr.5332
3 жыл бұрын
Nice job. Thanks for the free education. You dont know how much I appreciate a good informative video such as yours. I just did mine last weekend and if it weren't for your video, I'd prolly be out of a job right now. Thanks again.
@nelsonbonilla5325
3 жыл бұрын
Great video! Best I’ve seen on this topic and I’ve watched almost every KZitem video on this. Straight to the point and very informative
@janascott6085
4 жыл бұрын
Great video. Nice step by step with details on nearly everything. Would like to have seen the complete removal of the carrier. Great video. Thank you. Tom
@jeromebrugger6460
4 жыл бұрын
Very informative, well composed. Thank you for adding torque values.
@bdowlytle
5 жыл бұрын
Thank you for the tutorial. Best one I’ve seen in a while.
@LOSTXPLAYGUN
3 жыл бұрын
Very clear an solid instruction in this video. I build my own rigs and found your video to be solid. Good work.
@jaimedelmauro8836
Жыл бұрын
Nice job, great video, you did a great job explaining work and keeping it moving. no wasted blah blah blah like some other channels.
@baldinsuranceguy7931
5 жыл бұрын
Nice video. Straight and to the point and very helpful.
@andrewbochicchio2232
4 жыл бұрын
I don't own nor have I ever owned a Jeep nor do I plan on ever buying one but this video was very enjoyable to watch. Great videos by the way. Love the Channel
@colemiller6692
5 жыл бұрын
Great video man. Just picked up an XJ 2 weeks ago and I’ll be going through all this crap here this weekend. Keep it up🤘🏼
@rikarudo5
3 жыл бұрын
Awesome video, short and straight to the point. Very informative and accurate. Thank you
@adidas4275
3 жыл бұрын
Man.... you nailed this video. Super helpful. Lots of details & info Honestly some of the best work with normal tools I have seen
@francisbrackney2061
3 жыл бұрын
Great video man. You always do a nice job on trying to explain things in detail the best you can. 👍
@tobytollefsen8802
5 жыл бұрын
Awesome video. Fast and complete. Thank you so much for making it look EZ and saving me $$$$.
@sumptinfishy
3 жыл бұрын
Great video. Very helpful. I especially appreciate you including the torque specs. Thank you!
@elitearbor
Жыл бұрын
Amazing video! I hate getting started on a job blind, so this really helped give me an idea of what I'm getting into.
@JasonSpiffy
4 жыл бұрын
I watched the whole thing and didn’t see any comedy, am I at the right place! lol thanks good video. You made me realize I need to get more extensions if I ever need to do this.
@williamcritcher4755
4 жыл бұрын
Great video man, instructions I can follow. Straight to the point.
@yanakimous
3 жыл бұрын
I like how u explain in detail all tools used thats awesome cheers
@crowznest438
3 жыл бұрын
Wow, I've enjoyed your vids with a fun take on what's going on in the world but your mechanic vids are even better.
@AwakeningEnthusiast
4 жыл бұрын
Ok so I've seen all your 🌽 avirus videos but never these from years ago. Went on a marathon today when I woke up legit watched hella videos lol. Hit like on every single one! Love this channel. Been sharing it all over my city. I drive Uber and play it on my screen for people and they end up subscribing. Probably got this guy at least 100 subs in the last 3 months at least. :) I take like 15+ rides per day, play his vids for entertainment in my vehicle. He's got a big fan.
@MrSilver02ta
4 жыл бұрын
by far the best how to video on this!! very good job!!
@ar15luciano
4 жыл бұрын
Made it look like a cake walk, definitely one of the best videos ive seem for this job, well explained and damn good detail 🤘
@TheChristiondavid
4 жыл бұрын
Thanks for posting my o4 jeep sprung a leak on the drivers side axle now with the help of your video i know what tools i will need and parts to order thank you.
@mattfogarty8144
5 ай бұрын
Very good explanation of things and straight to the point! Subscribed!
@mefistofer
3 жыл бұрын
Beautiful video. To the point NO BS, well done and thanks!
@megarza18
4 жыл бұрын
Great work, i find really usefull that you put the sizes for each thing
@62hook
3 жыл бұрын
Finally! A video that is not full of a load BS that any do it yourselfer already knows. Damn good job man!
@emilygreenwood4157
3 жыл бұрын
i watched all the way through the ads because i love how you did your video so much.
@scottcampbell2836
4 жыл бұрын
Outstanding video. Thanks for taking the time To make it.
@stevencasperson921
Жыл бұрын
Thanks for the great video I could never been able to do this job without it
@PinBall3
3 жыл бұрын
Excellent Tutorial Short and to the point......
@Starri0fficial
4 жыл бұрын
Great video man. Simple and to the point. Very helpful. I dont think I ever hit subscriber so quick haha.
@MaverickXeo
4 жыл бұрын
Just stumbled on this video... I did my seals a little while ago and had a hard time getting them back installed. I never would've thought to use a 33mm socket to remove and install with the old seals. That would've made life so easy! Oh well, I'll know next time, haha!
@suckerpunch1977
2 жыл бұрын
Fast and straight to the point. Thanks.
@w.c.6678
3 жыл бұрын
Good info. Good video. God Bless you for helping people out.
@sevensinsvelocityshop7563
4 жыл бұрын
Awesome video man, I’ve never done them on one of these little Dana 30’s so you definitely helped me out a bunch
@daviscc65
2 жыл бұрын
So gentle yet so effective
@southbay281
2 жыл бұрын
Nicely detailed and straight to it.
@ypahihi
4 жыл бұрын
Awesome vid dude, love the small but important details that you share with us. Please keep them coming 😃
@barricadegarage5361
4 жыл бұрын
Thank you
@dieseltrucksfirewood2540
5 жыл бұрын
Excellent video and great job filming and describing each step. One of the best I have seen. That is a pretty big job and it looks like you did it in a parking lot.
@barricadegarage5361
5 жыл бұрын
Diesel trucks Firewood thanks
@kuulapaa
Жыл бұрын
Well made video! Simple and quick instructions
@hydroboy35th
4 жыл бұрын
Good job on the video. Very thorough information.
@alafrosty
3 жыл бұрын
Great job with the video and narrated guidance. The axle shaft seal should ride on the shiny journal surface further out than you show it in the video, but it's still really obvious that the old was was wallered out. This is a good time to inspect the CV axles for play and replace if they are worn.
@royrodgers3296
3 жыл бұрын
Thank you! Dealing with a leaky axle now!
@keithcolvin8063
Жыл бұрын
Superior quality video excellent job my friend 👍
@mayor399999999999999
5 жыл бұрын
Damn! I wish you were my neighbor. Lol. I'd supply the cold ones. Nice work. I have to tackle this job soon.
@MrAllegiant1
3 жыл бұрын
great video, especially tool sizes.
@wasabifiend
4 жыл бұрын
Nicely done video! Thank you for posting it!
@geordiemckimm7388
5 жыл бұрын
Excellent video. Thanks for taking the time.
@barricadegarage5361
5 жыл бұрын
No problem! Dont forget to check out my update video with the axle seal installer tool kzitem.info/news/bejne/pqqNsWibhWWqpo4
@woe2thet1m1d6
3 жыл бұрын
You nailed it, good job. I'm going to go fix mine now!
@johnnyhatesjazz7434
3 жыл бұрын
Great instructions, to the point,Thanks for sharing.
@jonothanl4886
3 жыл бұрын
Thanks man ! Appreciate the walk through !
@n2dabloo
4 жыл бұрын
Very informative and to the point. Subbed for more!
@leorael4497
3 жыл бұрын
Very descriptive! Well done!
@steffis11
3 жыл бұрын
Absolutely perfect. Thank you so much
@baldhead7705
5 жыл бұрын
Damn good video bro thanks, very professional easy to follow.
@sharedmomentscaptured7368
4 жыл бұрын
liked the video bro, quality commentary i enjoyed the knowledge acquired
@MickLAMF
5 жыл бұрын
Hey thanks alot for the video! Good instruction and clear pictures really helpful.
@barricadegarage5361
5 жыл бұрын
+Kyle Spingler thanks for watching
@tugginalong
3 жыл бұрын
Great job on this tutorial. I’ll subscribe. I hope you make lots of money on your channel.
@gokmenelgun
4 жыл бұрын
Great work, great video
@allstarsk331
2 жыл бұрын
No bs, straight to the point 👍
@SolivagantJourney
3 жыл бұрын
Great video man! Helped me a lot
@tysamuels
Жыл бұрын
That was fantastic, thank you!
@jeffreygrubejr8770
Жыл бұрын
Great job on the video.
@epicragegaming2016
4 жыл бұрын
the hand pump for fluid, great idea.
@kacpermatuszczak3726
3 жыл бұрын
Nice job !!! I like Your videos, because You show everything from beginning to end. It's great help for beginniers like me :) Cheers from Poland !!! :)
@redj90144
4 жыл бұрын
Wait your a comedian and a mechanic??? Ur awesome
@jake-mv5oi
4 жыл бұрын
Just an FYI, the bearing caps are marked with a "J" on the bottom and a corresponding mark on the housing to show which one is which. Look at 8:18. I made a tool to press the seals in using a 1/2" bolt, a puck from a seal driver kit, and a 38mm socket (that fit perfectly inside the new seals).
@toddweber3156
2 жыл бұрын
Nice work! Thank you!
@marccummings2841
Жыл бұрын
Ty so much it's was easier than I thought
@Kinny313
3 жыл бұрын
Thanks for this, for sharing your gnosis.
@JMOLLFULLE
3 жыл бұрын
Great video, God Bless...
@workin4alivin585
4 жыл бұрын
So that's what all those ratchet extensions are for in my daddy's tool box! We don't have Jeeps. Just watched for fun. Wasn't disappointed. Loved the details. It's not magic, but it sure seems like it at times. 🙂
@smitty3973racing
5 жыл бұрын
Great video and thats a bad ass jeep!
@laverdadsiempre2823
4 жыл бұрын
that video was amazing very understandable
@snewkirk75
5 жыл бұрын
good shit man, so informative.
@no-worries-its-okay
3 жыл бұрын
Have to agree with many here. Great Tutorial!
@stevestewart3816
3 жыл бұрын
Thanks barricade garage. Thanks to you..today I fixed a problem with a jeep and then I got laid. 😊
@barricadegarage5361
3 жыл бұрын
Haha my man💪
@heavyhitr7696
4 жыл бұрын
Very good video. A little bit more showing of the different actions steps would be helpful for future videos.
Пікірлер: 237