Check my other Jeep Gladiator Build Mods Playlist kzitem.info/door/PL0aSBcIRppXDQfCZelc3hpE11FOKTKRjY
@TangoDown1911
Жыл бұрын
That tip about compressing the Falco steering stabilizer was spectacular! I got her done, and that was my only hold up. So thank you!
@MoreDirtMoreDistance
Жыл бұрын
Glad to help!
@bobbyg7552
11 күн бұрын
It might be my imagination, I installed the Nexus 2.2 on my 2023 Gladiator Mojave, it seems to wander a little more than the factory stabilizer used to when driving in a straight line. I was using the medium setting.
@georgeetherege8347
3 жыл бұрын
Excellent video - a lot of info packed in a short, direct presentation. The visual representation of the installation steps: great viewing angles and well lighted and perfectly focused videography. Thanks from another Gladiator owner. I’m just OCD enough to want to tighten up the slow and moderate speed handling.
@MoreDirtMoreDistance
3 жыл бұрын
Thanks! Glad you appreciate the videos. Angles and lighting are so important. It is so frustrating to me when I can’t see the part someone is talking about because the angle and/or lighting is bad.
@IndianMC-jf3cp
Жыл бұрын
Just installed this exact stabilizer a couple days ago. Wow! What a difference. No more steering wheel shudder over bumps and potholes.
@MoreDirtMoreDistance
Жыл бұрын
Nice!
@MC-cv6vc
2 жыл бұрын
Good vid. On a side note, don't be afraid to add some personality to your video. Sounds a bit robotic and monotone.
@MoreDirtMoreDistance
2 жыл бұрын
Thanks
@richsanderson9103
3 жыл бұрын
You are spot on about the Tera Flex Falcon Adjustable Steering a stabilizer 👍💯
@MoreDirtMoreDistance
3 жыл бұрын
Thanks! 👊🏾
@joebartlett3255
3 жыл бұрын
Great video. Put my synergy steering/track bar mount on 2 weeks ago, and will be installing this stabilizer next week.
@MoreDirtMoreDistance
3 жыл бұрын
Thanks! The mount and stabilizer is a nice combination and improved the feel of the steering.
@unlockedsam1223
3 жыл бұрын
Like your reviews..Gladiator looks sharp..
@MoreDirtMoreDistance
3 жыл бұрын
Thanks! Trying to provide helpful installs and reviews glad you like them.
@turboleggy
Жыл бұрын
Appreciate the post and tool list. ❤
@MoreDirtMoreDistance
Жыл бұрын
Glad it helped!
@mikeeynon2973
Жыл бұрын
Good tips and install nuances.
@mikeeynon2973
Жыл бұрын
And you didn’t waste a bunch of time with nonsense up front like a lot of producers do.
@MoreDirtMoreDistance
Жыл бұрын
Thanks!
@LidZLife
3 жыл бұрын
Nice job. Great video! Thanks for do it.
@MoreDirtMoreDistance
3 жыл бұрын
Thanks! Glad you found it helpful.
@exoplanetnomad
3 жыл бұрын
Great video, the stabilizer should've been designed not to touch the casing though!
@MoreDirtMoreDistance
3 жыл бұрын
Thanks! I know. I wasn’t expecting that issue.
@KTMcaptain
3 жыл бұрын
Nice review
@MoreDirtMoreDistance
3 жыл бұрын
Thanks!
@Anders0nic
3 жыл бұрын
Could you potentially make a spacer for that last few degrees of steering angle where your stabilizer impacts your diff cover? Great review btw.
@MoreDirtMoreDistance
3 жыл бұрын
Good idea! Thanks for your input.
@davidrey7410
3 жыл бұрын
I have the same issue with the adjust knob not displaying the SOFT setting correctly. Can you expand on your fix please? Thanks.
@MoreDirtMoreDistance
3 жыл бұрын
Make sure the logo on the mounting brace is facing you and facing up. Twist the shaft until the soft setting is in the vertical position facing you. You may have to flip the knob. If you can’t twist it it may to on the firm setting just flip the knob in the opposite direction. Hopefully that helps. Good luck.
@dmwgarage
Жыл бұрын
Great video! Well done on figuring out the issues. It appears that the stabilizer shaft is flexing when it hits the diff cover. To me that would lead to an early failure of the stabilizer. Did you contact anyone on that?
@MoreDirtMoreDistance
Жыл бұрын
Thanks! I haven’t done anything about it. So far I haven’t noticed any issues 🤞🏾
@cambuchanan5836
3 жыл бұрын
Nothing on your part, but I can’t believe they didn’t test that knob for rubbing on different sized diff covers!
@MoreDirtMoreDistance
3 жыл бұрын
Yeah! I didn’t think an aftermarket diff cover would be problem.
@Fit4Life921
2 жыл бұрын
I have aftermarket diff cover and I can’t even turn the wheel all the way bc the falcon hits it.
@MoreDirtMoreDistance
2 жыл бұрын
Someone suggested to try using spacers where the stabilizer is mounted to the axle. I haven’t tried but it could be a work around.
@dantewest9826
3 жыл бұрын
👍🏾
@MoreDirtMoreDistance
3 жыл бұрын
👊🏾
@jeremiahkinealy9953
Жыл бұрын
Can someone explain to me the spacer for the bracket? I installed it on the bottom with a stock track bar, because that’s exactly what my instructions show, but realized later the words in the instructions said to install it on the top if stock track bar. What will it hurt leaving it on the bottom? What is this for? Thanks.
@MoreDirtMoreDistance
Жыл бұрын
I’m not sure if it matters. Wish I could be more helpful…
@anthonymenke9837
3 жыл бұрын
Is this a 20 or 21? Steel or aluminum steering box? I have a 21 drives pretty good but does want to wonder a bit.
@MoreDirtMoreDistance
3 жыл бұрын
Hey, It’s a 2020 with the aluminum steering box. The steering stabilizer definitely improved the handling, but it still drives like a Jeep.
@H.avery355
Жыл бұрын
Is the Synergy Manufacturing Heavy Duty Adjustable Front Track Bar mandatory to add on my factory stock tires? Or am I good to just have the teraflex falxon steering stabilizer on my factory track bar? Mostly my daily driver for a more comfortable drive..I do minimal off roading for now.
@MoreDirtMoreDistance
Жыл бұрын
No you don’t need an aftermarket track bar. It should work on a stock vehicle.
@AlanTrades
Жыл бұрын
If you had to get the shaft brave or steering stabilizer, which one is more beneficially?
@MoreDirtMoreDistance
Жыл бұрын
I felt the biggest difference with the steering stabilizer.
@AlanTrades
Жыл бұрын
@MoreDirtMoreDistance thanks, any other useful mods?
@MoreDirtMoreDistance
Жыл бұрын
@@AlanTrades To be honest after a lift and bigger tires I would say organization mids have been the most helpful. Not really cool but there is a lot of stuff you have to take offroading.
@snilloconator
3 жыл бұрын
Unfortunate that so many are spending a fortune on aftermarket products to correct the wandering in the JTs. I found the following video (kzitem.info/news/bejne/0G-r2IdokqCjjWU) after purchasing my CPO 2020 gladiator and the new beefier gearbox cured all the play and saved me money. Just wanted to share that there is a TSB on this and if your Jeep is still within the factory warranty you can have this upgraded free of charge. Hope this helps.
@MoreDirtMoreDistance
3 жыл бұрын
I’m aware of the TSB, but thanks for share the info.
Пікірлер: 51