Can you tell us the colors of the wires on the B pillar and which one are the positive/negative left / right?
@leviwright271
2 жыл бұрын
I bought this box in the packaged version that came with two 10” Rockford Fosgate R2 subs, all the cables / hardware, the amplifier and output converter this June (2022) and I couldn’t be more impressed. These videos were really helpful. I would just say to make sure you slow down and have the right tools. A breaker bar was nice for removing the back seat since the bolts have thread locker on them. But the install was very straight forward. Super super quality product. The best part is I called the place twice with some questions and the owner himself answered. Talk about a rad small business making a great product. Oh, and the subs sound excellent after a little tune.
@ranchodosacuarios1967
2 жыл бұрын
How are you liking the box a month later?
@farkled
2 жыл бұрын
For future installs on Gladiators/Jeep JL, there is a wire gutter that you can put that red cable through instead of stretching it across the engine bay. In fact, you attached the wire to it! ;)
@ashleys9932
2 жыл бұрын
Do you know where I can find?
@raymondbennett6793
Жыл бұрын
I have a 21 Jeep Gladiator, I have a sub in an amp just needed a video to show me the way 👍👍.
@Iamkraze
Жыл бұрын
Ah I just finished the install yesterday and had troublre lining my box up.. Watching this I see the foam was the issue. Too funny. I solved my issue by added fender washers to help cover the offset holes. I guess if I ever take them back out I know what to do :)
@WillBuryU
Жыл бұрын
Every other video had me taking my dash out. I gave up. Thank you, I can finish running the wires for my amp. I was not going to disassemble my dash.
@brpauto7313
Жыл бұрын
Glad we could help.
@NoobJT
11 ай бұрын
Im right here with this comment. I appreciate you sincerely for taking the time to show us. Subscribed!
@JonhatanRamos-k7n
16 күн бұрын
Loved the video , thx . Quick question though , I have a 2018 jeep Jl rubicon and I’m trying to run my rca converter. I removed my Rear sub and see 4 plug connection into the sub . What wires do I get to ? Much appreciate your response. Thank you
@artrincon1936
2 жыл бұрын
How do you know which is left or right when splicing into the factory speakers
@gregjewer5203
2 жыл бұрын
what wires were you tapping into in the pillar speaker wires
@teyjizzle
Жыл бұрын
Not many videos of jt or jl installs. Especially the damn ground. Now I now what to do and what corners to cut to put my amp in my 2020 jlu sport 😊
@def-supreme5409
Жыл бұрын
Good job; you may need a capacitor, however; you are an excellent technician and would make good use as an Avionics Technician on our Black Hawk helicopters at Patrick Space Force Base
@brpauto7313
Жыл бұрын
Not for 500 watts of power.
@dannykennedy1962
2 жыл бұрын
Please Lower the Background music, sir... It's distracting.. Otherwise, you have a great site! Thank you for your time!
@brpauto7313
2 жыл бұрын
Thank you.
@mikekins6545
2 жыл бұрын
Could you be a little more clear about colored codes left and right positive and negative please. I went through the whole video and you were not very clear on that. The most important thing of the whole project.
@EDubiton
2 жыл бұрын
why not run the battery cable through the conduit?
@Ragamatazs
2 жыл бұрын
Obviously you were only powering the subwoofer with the amp. It’d be nice to see how to power the rest of the factory system with the amp.
@carlosgermes4229
Жыл бұрын
awesome video…i’ve already replaced all factory speakers on upper and lower dash and sound bar with jbl speakers i want to add a amplifier and rear seat subs also to my 21 gladiator with alpine system which has its own sub woofer what do u recommend to do with that alpine factory subwoofer
@brpauto7313
Жыл бұрын
We just leave the factory sub alone. It won't effect anything.
@rme7807
2 жыл бұрын
What are the colors to the speakers on the overhead compartment positive/ negative?
@Sasquatcho70278
2 жыл бұрын
Love the content thank you
@brpauto7313
2 жыл бұрын
You're welcome 😊
@zachvogeler7210
2 жыл бұрын
Nice video, how do you like the lci2pro vs a head unit in the dash is there any difference in SQ & loudness?? I’m debating on the lci2pro
@brpauto7313
2 жыл бұрын
@@zachvogeler7210 I really like it. It doesn't a. Really good job with the signal.
@ianbailey2127
Жыл бұрын
This was helpful! Thank you very much! 💯
@brpauto7313
Жыл бұрын
Glad we could help.
@ianbailey2127
Жыл бұрын
Quick question, if I wanted to run 2 amps in my JL Wrangler do I need a different line converter or can I use the same one you used here?
@brpauto7313
Жыл бұрын
@ianbailey2127 No. You will need to buy the Audio Control LC7i. That's made for 2 amps. We have them on our website if you need one.
@christiankendall3875
2 жыл бұрын
Did the mounting screws penetrate the back of the cab? If so, did you seal them or coat them? I’m mounting 2 DS18 amps in that area. Video is awesome and so informative. Thank you.
@brpauto7313
2 жыл бұрын
No they did not.
@FlyLowJoe
Жыл бұрын
Great video! My installer said he can’t get the Gladiator started. All the lights turn on as if the Jeep will turn in but no spark. Now he’s trying to figure out why. Any suggestions? It’s 2023 gladiator Willy’s
@brpauto7313
Жыл бұрын
Check the auxiliary battery. That's usually the issue. It's located under the big battery.
@FlyLowJoe
Жыл бұрын
said that there is current on it so checks out good?@@brpauto7313
@bigeasydeg
11 ай бұрын
In your opinion, do you get more bass from the 4 8” subs or 2 10” subs?
@josephdeliberti3405
2 жыл бұрын
Wow, an amazing video. Great walkthrough! That install looks amazing!
@brpauto7313
2 жыл бұрын
Thank you
@josephdeliberti3405
2 жыл бұрын
@@brpauto7313 Honestly thank you, you saved me a bunch of hassle. I Bought A sound bar from a different company the was supposed to be plug and play… it wasn’t and their instructions suck! This video is an amazing walkthrough for what I needed! Plus after the video I have to check out your shop and found a sub box I was looking for!
@bigboyreeves11
Жыл бұрын
Do y’all make a under the rear seat box for 2018 jeep JKU for four 8’s
@brpauto7313
Жыл бұрын
Sorry but we don't.
@bgator71
Жыл бұрын
i am confused by your installation. you said you were doing front dash speakers, sound bar and sub. you only ran 4 wires to the sound bar. what about the front speakers and the sub.? is these a only a 2 channel setup with out a fader control on the radio?
@brpauto7313
Жыл бұрын
The video is on how to install 1 amp and Subwoofers, not the soundbar and dash speakers.
@coonthriller9480
Жыл бұрын
Good video except for tapping into speaker wires. Got me all fukd up there listening to you explain those. My god.
@BassHead2020
2 жыл бұрын
What about a 4 channel amp sub amps are easy. What harnesses do you use to plug into factory radio to keep the resistance on the u on next speakers?
@BassHead2020
Жыл бұрын
Hello?
@Tatiidany
2 жыл бұрын
Can i do this whole process for when upgrading my headbar speakers? Will the uconnect system be able to send the signal to the speaker wires to the B-pillar?
@brpauto7313
2 жыл бұрын
Yes
@jasenjaz82
Жыл бұрын
The LC2I shows to use a 1amp fuze in the 12v power, nothing about the LC2I Pro though on their website, (also what I bought). Do I need to run a 1amp fuze inline from the amp to the LOC?
@brpauto7313
Жыл бұрын
No.
@justelish
11 ай бұрын
where you located? I need the same sound system installed
@brpauto7313
11 ай бұрын
Where located in Mesa Arizona but we can ship you what you need.
@thekraken2815
Жыл бұрын
@BRP Auto I recently bought a kit from you guys and absolutely love it! Only issue I have is the sub woofer knob isn't working. However I'm not running the in line converter as the head unit I have isn't factory so the wire for the sub knob is plugged directly into the amp... is this correct??
@brpauto7313
Жыл бұрын
We would need to know exactly what kit you bought from us in order to give you the right information. Best thing to do is call us or email us with that info, so we can give you the right instructions.
@thekraken2815
Жыл бұрын
@brpauto7313 thanks. Just sent you an email about it.
@JoseFelixTV
2 жыл бұрын
@brp auto Sir no video for the sound bar?
@jordymotors5405
2 жыл бұрын
This fits in Jeep Wrangler Jl rubicon??
@davidiglesias574
2 жыл бұрын
Very professional 👏
@dss42186s
Жыл бұрын
What are the red connectors called you used to tap into the speaker wires
@brpauto7313
Жыл бұрын
T-taps.
@sroldan72
Жыл бұрын
Really nice i will try this for my
@seanpitts792
2 жыл бұрын
so are you only amplifying the rear sound bar speakers and the sub box? why not amplify the front speaker sets as well?
@brpauto7313
2 жыл бұрын
We're just upgrading the soundbar and dash speakers with better ones for clarity and adding the subs for better bass.
@artrincon1936
2 жыл бұрын
What gauge of wire did you use for the LC2 pro 12v power and ground
@infinitedev2697
2 жыл бұрын
So where you installed the power wire it’s safe to have multiple wires connect to where that battery nut is ?
@infinitedev2697
2 жыл бұрын
I accidentally installed it to the main positive batter where the clip and the beveled nut is, shorted out my whole car.
@bud1lite
Жыл бұрын
I noticed the sound bar speakers have very little lows or highs,does the stereo limit this,or is it just because of the speakers,adding subwoofers also and didn’t know if that would be a good speaker wire to splice into. Great video also👍🏼👍🏼
@brpauto7313
Жыл бұрын
I can help answer the question but first I need to knw. Are you still running the factory soundbar speakers or did you upgrade them?
@bud1lite
Жыл бұрын
@@brpauto7313 I will be upgrading them. Just wasn’t sure if that wire would be good to use as a signal for the lc2
@brpauto7313
Жыл бұрын
@Bud1lite I'm not understanding exactly what you are doing or wanting to do. I'm in the office for a little bit right now. Give me a call I will try guiding you the best I can. Here is my number (480)569-3133
@brpauto7313
Жыл бұрын
I never heard from you, so I will try and answer the best that I can. If you plan on installing 2 amps. 1 for the subs and one for your mids and tweets. You will need to use the LC7 not the lc2. The Lc2 is only for 1 amp and the lc7 is for 2 amps. If your not planning on using an amplifier for the mids and tweets just upgrading the factory soundbar speakers will make a huge difference in sound quality.
@bud1lite
Жыл бұрын
@@brpauto7313 thank you for the replies,according to crutchfield you can have a sub amp and main speakers just would lose fader option. But I’ll get all that,only question I really had was if the sound bar speaker wires were a good signal to use ,obviously it works just fine after watching your video. Appreciate it👍
@christiankendall3875
2 жыл бұрын
What size screws and spacers did you use?
@johnnyserrano6119
Жыл бұрын
Does the factory sub stay connected?
@brpauto7313
Жыл бұрын
Yes
@chinothedreamgiver1629
2 ай бұрын
You in Florida?
@brpauto7313
2 ай бұрын
No we're located in Arizona but we ship all over the country.
@ryanmiller6861
2 жыл бұрын
What is that box on the passenger side that is coming through the carpet? I guess that part got skipped over. Y’all tucked the box underneath the box to hide it.
@brpauto7313
2 жыл бұрын
That's the module for the rockslider steps we installed on the Gladiator.
@ryanmiller6861
2 жыл бұрын
@@brpauto7313 ah ok! Thank you!
@heathgirton5606
2 жыл бұрын
What did you did with the factory sub? Did you leave it installed or did you remove it? Does it still play if you left it in? Also if I add after market speakers do I really need to add a Amplifier to them,or can I let the fa they head unit power them?
@brpauto7313
2 жыл бұрын
We left the factory sub connected. It doesn't effect anything.
@brpauto7313
2 жыл бұрын
Not at all. It will continue to work exactly like before but won't effect anything.
@djmixr713
2 жыл бұрын
Will this system work if I already have the upgraded alpine system? Will I still tap into the green wires from the pillar like you did in your other video?
@brpauto7313
2 жыл бұрын
Yea. Everything is exactly the same.
@cleatus45
Жыл бұрын
@@brpauto7313 so the sound bar speakerwires in the video will have all the "lows" going to them? (on a alpine system with factory sub) just curious if you could use the alpine sub line going to the rear sub instead of the soundbar wires
@brpauto7313
Жыл бұрын
Yes. The system will have all the lows but you can tap into the rear sub. It's easier to tap into the soundbar. In order to tap into the rear sub. You will need to remove the seats.
@chuckblair5
2 жыл бұрын
Do the subs have grills to prevent from hitting the seats when in the down position ?
@brpauto7313
2 жыл бұрын
No. The subs don't need grills. The seats sit high enough to prevent the subs from hitting.
@mikew5859
2 жыл бұрын
Any idea what this system weighs?
@brpauto7313
2 жыл бұрын
about 35 /40 pounds
@mikew5859
2 жыл бұрын
Thank you!
@michaellangston2856
2 ай бұрын
no way that box sounds good. No air space. Dealing with this issue now.
@brpauto7313
2 ай бұрын
Look at the reviews all 5 stars
@jasont4r10
15 күн бұрын
I got a custom box made for 2 8s that your best route and a 2 inch lift on the rear seats
Пікірлер: 98