Check out this Playlist for more Jeep JK DIY Content kzitem.info/door/PLxtlXKgrDXMUC5U503VpKN5K3fYWn8umo
@mattgerberick4936
2 жыл бұрын
Thank you so much for this video! It was a huge help in diagnosing and fixing my check engine light issue.
@trhaverstock
2 жыл бұрын
Fixed mine tonight - yeah! Thanks for the video! BTW, I reset the code after adding the hose clamp and it didn't go away until a few mins of driving for some reason.
@lanemyer3696
3 жыл бұрын
Thanks for posting this, had the same issue on our 2016 JK, put a hose clamp on it and the code is gone, thanks again!
@glennbaz2
Жыл бұрын
The hose at the intake manifold will have nothing to do with you error code. That connection is after the electronic valve that closes and causes vacuum in the evap system. When the engine is running the valve is open and vacuum from the engine sucks in the fumes. You could disconnect that hose entirely and it would not give you a code. The system is monitored when the engine shuts down that is when possible evap vacuum pressure is lost and an error code is displayed. If I am wrong pleas feel free to correct me. Thanks Glenn
@BECCALETULLE
2 жыл бұрын
So I just spend 4k fixing my camshaft and it was making that knocking noise! Steve better get that looked it. I got it fixed and no problems but now I have a vacuum leak but from this video, hose clamp problem solved!
@SteveRobReviews
4 жыл бұрын
Smoke machine for the win. 👍
@thereddragonslair9548
Жыл бұрын
I was wondering if maybe you could do a video on how to make the hose that you use where to hook it and where to hold it on the fog machine? I think it would be rather informative if we seen a step-by-step?
@lanemyer3696
3 жыл бұрын
Had the same issue on our 2016 JK, put a hose clamp on it and code is gone, Thanks!!!
@RobKingRC
4 жыл бұрын
I have a few of them laying around and never thought to try this. Thanks for another good tip Jerry👊
@ThomasLong-if1dd
5 ай бұрын
The hose you repaired would not fix a P0456 code, you would have to smoke test from the purge valve back after putting it in a leak test mode with scan tool
@billywiggins5181
3 ай бұрын
truck failed inspection it said # 1 plug. so i changed all the plugs and coils. its still missing at the # 1 plug. will a smoke test show me where the problem is ??
@pike513
Жыл бұрын
Great great info and idea for the smoke test!!!
@belltechguy1
Жыл бұрын
This unfortunately can not be the cause of the P0456 code! When the system runs its self test for leaks it CLOSES the purge valve and vent valve simultaneously and checks for pressure drop in the system, which would indicate a leak. Therefore, the hose AFTER the purge valve, going to the intake manifold is not part of the test. It could be completely disconnected and it will not throw a P0456 code. You have another issue causing it. I'm sure by this point you've figured that out when the light came back on. Did you do a follow up video to identify the real problem?
@TestDontguess
Жыл бұрын
The problem never came back
@jeffd7487
2 жыл бұрын
I know I could spend a couple grand on the Snapon Truck and purchase their fog machine. But I like yours better looks like it doesn't cost a couple grand
@danhambrick6331
4 жыл бұрын
Man that was an easy fix Jerry...
@williamkenas8765
2 жыл бұрын
Thank you, fix my issue for under $5.00.
@kingg1466
2 жыл бұрын
Hello have the same problem I took it to a mechanic and couldn’t find the problem even with the smoke machine so he told me to change the gas cap and I did I put the original and it was ok for about 40 miles. And it came back. He mentioned that could be a computer problem
@Advanceauto999
10 ай бұрын
Which fluid are you using and size of hose. Thanks
@roofrat68
3 жыл бұрын
I got a small evap leak, just wondering where do I put the smoke machine tube in a 2007 jeep wrangler jk unlimited. Is it the top or bottom of the purge valve?
@mrhoya14
2 жыл бұрын
I got a p071 and p074 lean fuel codes on my jk. Any info on how to fix?
@CREATEDBYJULIO
Жыл бұрын
Was there gas smell inside the cabin prior to the diagnostic?
@HoldMyBeerJeeping
Жыл бұрын
Thank you sir! How long did the hose clamp fix hood up for?
@jonben105
2 жыл бұрын
Have the same code on my 2016. That line was held on very tight though. Not sure where to look next after checking these three spots you pointed out.
@TestDontguess
2 жыл бұрын
That code can be anything right down to a loser or faulty fuel cap
@pimpmyride7278
2 жыл бұрын
@@TestDontguess there was a typo. What did you mean by “loser” filter or what?
@gizzyguzzi
Жыл бұрын
@@pimpmyride7278 loose?
@pimpmyride7278
Жыл бұрын
@@gizzyguzzi I ended up selling it. I bought the new Bronco.
@denisesmith6466
8 ай бұрын
Can you still drive with a small leak detection do you know ?
@justinedse8435
3 ай бұрын
@denisesmith6466 Yes you can.
@hassanaldossari2509
3 жыл бұрын
Excellent step thanks for you
@RVLIVING
3 жыл бұрын
Whats the link to Steve. I keep listening and it sounds like Homediet4x4?
@ifitsnotbrokenfixit1193
4 жыл бұрын
Easy one to figure out.
@nickcaruso2110
Жыл бұрын
video0 has sound
@-Tecky-
3 жыл бұрын
Did this cause any cylinder misfire / weird and random idle surges?
@TestDontguess
3 жыл бұрын
It can depending on how big the leak is
@jeffd7487
2 жыл бұрын
I would love to know how you made or what you used to make your smoker from
@philrodgers993
11 ай бұрын
Who has a "smoke tester" lying around?
@jessyshaq23
4 жыл бұрын
Definitely not the problem... engine vacuum holds that line on.. thats why they don't clamp them..
Пікірлер: 43