That 1 tire burnout in the dirt at the end really sold me! Where do i send my money?!😂
@timreynolds2935
Жыл бұрын
It's good to have options. I'm still glad I did a hemi conversion. Actually, anything Exodus does is incredible. I'm extremely pleased with their work.
@Exodus4x4
Жыл бұрын
Thanks Tim!
@AreYouAwakeYet
Ай бұрын
If I did a conversion I would much prefer a hemi too. Excellent choice and keeps it in the same family and electronics have less issues with the guages and cruize control. Plus the sound of a hemi is PRICELESS! :) Congrats
@candicebeebe6688
Жыл бұрын
So that's how you fix jeeps, replace most of the drive train. Good to know
@Theoriginalbubbafett
Жыл бұрын
Yep.
@erisgh0sted961
Жыл бұрын
Facts.
@trentdawg2832
Жыл бұрын
Most overpriced and underpowered joke on the road/trail
@jaimeedwards1269
Жыл бұрын
this is how you fix a Ford by Installing a GM power train
@toddk4412
Жыл бұрын
Yep. At least the ones that that Dodge neutered.
@jeffclark5024
Жыл бұрын
Not bashing the LT at all but it’s got some big shoes to fill. I’m not a jeep guy by any means so idk about integration issues with LS swaps with them but I’d think that’s on the installer. The power, proven reliability, affordability , availability, aftermarket support and so much more is still in the LS’s favor.
@queensapphire7717
Жыл бұрын
I want simpler, a naturally aspirated motor, NO GDI, a timing CHAIN, not a belt, not loose piston rings, an Automatic Transmission with a dipstick.
@KubanKevin
8 ай бұрын
Lt engines are very good. 8 speed auto I do not agree. I was part of a c7 corvette club here in Miami and the 8 speed owners had nothing but torque converter and gearbox issues while the engines were bulletproof.
@matthewmiller2268
Жыл бұрын
Make sure to install an air/oil separator that drains the oil back to the crankcase after it's been separated because you'll get excessive carbon buildup from the crankcase ventilation on the backside of the intake valves and ports. For truck engines, the torque band should be down low not up at 4100.
@RadDadisRad
7 ай бұрын
That torque range is peak torque at 4,100, that is good because it’s only a 5.3
@dougg8280
Жыл бұрын
Lighter than a hemi. Torque lower and smoother in the power band. Easier cooling. Lower cost. Seems like once the computer interface is solved, the Chevy is the obvious choice. What's the catch?
@Exodus4x4
Жыл бұрын
Nothing really. It’s a used drivetrain but less than 40k miles.
@farncoisbisson7737
Жыл бұрын
Gen V are hot garbage from the stock form(I own a 2016 l83 and 2018 l86) oem lifters collapse. I suggest running premium oil and really keeping up with the oil changes if stock.. . 6.6l(l8t) doesnt have those shitty lifters but its iron block... if you have a 5.3 or 6.2 you better go with a different camshaft and lifters if longevity is the goal.
@needmoreboost6369
Жыл бұрын
@@farncoisbisson7737 they hate the thin oil!
@joel.3112
Жыл бұрын
@@farncoisbisson7737 Yeah GM needs to let the AFM go they failed horribly at it. Once you do a delete on the LT platform your golden tho.
@joel.3112
Жыл бұрын
@@needmoreboost6369 Facts I use 5w40 and iam going through a artic blast here in Colorado , started my truck up at -20 sounds great and started getting better gas mileage to . With the 5w40.
@joel.3112
Жыл бұрын
Glad to come across this channel, They do nice work! It's a lot of dedication to learn them LT swaps✊️
@TheGoodTheBadTheRowdy
Жыл бұрын
Ah ok, glad I found this, now I understand my son a bit more. He has a 2020 Rubicon, it was a recovered jeep, no motor, trans, wheels, suspension, interior... He eventually went with a truck as a donor for his motor, and completed it last year as his senior year and 4th and final year of auto shop, and welding class, project. He also bought an older Ram, that had cab damage, and swapped a c30 crew cab onto it, shortened the frame, he started fabbing a utility tray before summer, in april...and it hasnt been touched since hahaha. His auto shops teacher? Hes old school yes, but his son was an engineer at dodge, was at srt if I remember correctly. He then went to Toyota, and now works for a fire arms mfr. But he and his son had been doing swaps of newer 5.7 6.4 and 6.2s into different things. His son, that engineer helped my son swap a 6.2 from a jeep trackhawk into his 57 belair, that belonged to my mother since new. Its awd. I dont understand the engineering to well but I love it! Hes broken it down after taking it on hot rod power tour, finally going to get it painted and cleaned up! He has a base model jeep gladiator he bought as a theft recovery again, he wants to do a cummins swap in, and monster tires. He has a uhaul truck he wants to cummins, and build a tinyhouse tow rig for use for events and such. He wants to make a lighter and stronger box before he grads from college, so thats a while away. He has a miata with an ls1, that isnt complete... an older 2dr jeep that belonged to my other son, he swapped a 22R-E from a toyota? Into, because it was free at his pt job at our county wrecker. He sent me your way to watch videos! Glad I did as I said! Man, all you guys do wild stuff! Here I am happy with my '23 Daihatsu Hijet Jumbo, bone stock for our ranch property. And my stock sport s hahaha! My 72 challenger I got in high school, doesnt run, been thinking of doing something weird like maybe 4x4 that bastard, freak my sons out? I dunno. I wish there was a regular cab jeep truck, with a longer and slightly wider bed, maybe fold down and removeable? I was dragged up to overland expo a couple months ago, and I saw the danged weirded jeep, a regular carb, shorty with only a utility basket tray, very small. My young son the budding frankenstein builder said "dad, just buy a 2 dr jeep and I can hack it up for you, give me the new hijet for labor!" hahaha that sneaky little shit.... Hes also looking for a 3500 reg cab utl truck, no bed, he wants to build his own AEV style truck, he sold all his harley bastard bikes, and his hondas and yamahas this past summer. Only bikes he has left are a stock 48 sportster, a crf300, a trail 125, and his older sisters R1. His 91 mustang took a dump, and hes swapping a 5.7 from a challenger rt into it hahaha, and he wants to do a hellcat swap into his 74c10 step side thats dead and cobwebbing in MY workshop...my tractor and other stuff are outside hahaha... Hopefully see you guys next year at OLX! Now that I got to see what you guys do!
@tonyleyba67
Жыл бұрын
Buy the way I always find your videos informative and your little flash backs crack me up. THANKS
@brainofjjj
7 ай бұрын
I did this swap in a 1995 Bronco, It rips!
@hartman601
7 ай бұрын
I’m doing one right now. Run into any problems? Gm transfer case, atlas, or stock?
@jacquescrusan9500
Жыл бұрын
As an additional option: GM's relatively new 4.3l LV1 and LV3 V6's are space-conscious alternatives that are seriously worth considering. The new LV1/LV3 have ditched the architecture of the previous generations and gone straight to LT-based architecture. Out of the box, you're getting a 3.921" bore x 3.622" stroke (should sound VERY familiar for those that know LS1 dimensions), 285HP (5300 rpm) and 305 lb-ft (3900 rpm), and Scoggin Dickey Performance Center has already produced aftermarket cam grinds to sell to the market. Making this engine nearly bulletproof is relatively simple since the piston/con rod dimensions near exactly mirror original LS1 interrnal dimensions, meaning that sourcing bottom end parts (if you want) wouldn't be that hard to do. Has the same deck height as the LT's (9.025") which is also near exactly the same. TL;DR: Gm's new era 4.3l V6 offers just as much if not more power than the 4.8l V8 it replaces, and utilizes a lot of LS1 internal dimensions. Lots of untapped performance to be had there.
@OndreaS123
Жыл бұрын
I'm also interested in the LV1 for swaps, I hope more support comes around for them. some things I think would help reliability would be 1) a balance shaft eliminator, 2) a standard oil pump paired with oil pans, (eliminates the variable volume solenoid to simplify it ) & 3) a port injection intake. what's not to like? 100 lbs lighter than an aluminum LS and almost the same power as a stock 4.8
@joshlepley1306
Жыл бұрын
Nobody wants a V6
@mrnobody8540
Жыл бұрын
@@joshlepley1306 Unless it's a flat ( boxer ) 6 or inline 3.0 diesel 6 - then I would be interested.
@joshlepley1306
Жыл бұрын
@@mrnobody8540 there are a few good ones but far and few between. Grand National, Syclone. 4.0 jeep inline 6 is solid
@rdallas81
Жыл бұрын
@@joshlepley1306 ford 300 straight 6 is a beast of an engine. Many modern day 300s on the road some.w turbo/.supercharger.
@antonyiodice5351
Жыл бұрын
I acquired an L8T brand new from the factory that had fallen off its crate and the intake was damaged, so they stored it and eventually forgot to write a report and the engine basically became the dealerships. My younger brother notified me and a few months later I now have the thing sitting on a stand in my garage. Chevy factory warranty included. Now I must find a newer jeep to install it into. Thinking gladiator on one ton axles
@bigadielldne7234
Ай бұрын
Torquey Bulletproof v8 Nice choice
@wildmanturner
Жыл бұрын
Iv got The LT-1 in my 2017 Gen 6 Camaro SS… I get 30 mpg going 80mph and the power is insane with the 8 speed auto trans. The LT-1 is a 6 Bolt main engine block… Best V-8 engine chevy makes IMHO
@RadDadisRad
7 ай бұрын
The 8 speed transmission is straight booty cheeks. I have a 2022 6.2 Trail Boss with the 10 speed for my work truck. I average 16.8 mpg on 37s
@jerrymcgeorge4117
Жыл бұрын
I know this is only a random sample of two owners, club members of ours, but both had LS swaps done by a noted “expert” and had so many issues they sold their JKs. OTOH another friend had a Hemi conversion (AEV) done by a dealer and had no issues whatsoever. I’m skeptical any GM into JL/JT is going to be practical.
@Exodus4x4
Жыл бұрын
I bet I can fill in the blanks and say they were Motec swaps.
@jerrymcgeorge4117
Жыл бұрын
@@Exodus4x4 Yep
@nsboost
Жыл бұрын
LT motors are great in their own way. They make great power. But a LS is cheaper, still phenomenal, and a HUGE aftermarket. I'm a big GM drag racer... I still haven't moved to the LT motors yet for the reasons stated. Aftermarket and costs associated make the LS still where it's at (for me anyways).
@FrostE941
Жыл бұрын
Too expensive still
@nsboost
Жыл бұрын
@@FrostE941 I got $2500 into building a forged piston stock rod 325 LS that makes 1040rwhp. Obviously that doesn't include the turbo and fuel system... But you flat can't do that with any other platform.
@nahs3195
Жыл бұрын
U spent $2500 and u only got 1040 horsepower 😂 😂
@nsboost
Жыл бұрын
@@nahs3195 I'm just being honest lol. When you add in a cam... Good springs.. pushrods.. lifters... head bolts.. rod bolts.. honing the block.. the forged pistons.. decking the block and heads... Bearings, oil pump, new timing chain, Putting a intake on.. a oil pan. Be real you fool. You ain't putting it together for less unless you are someone's sugar baby. And besides.. I have $4000 into a fuckin air rifle. If you think $2500 is a lot of money.. you need to get a job and move out of your mom's basement lol
@BlackandWhitecustoms
Жыл бұрын
Yeah ls is still hands down best motor. It's only expensive when you have to pay someone else to do it which gets expensive no matter what route you go.
@techs1smh13
Жыл бұрын
That soon to be released 3.6 4 cyl. GM with a LS head 340 HP and over 400 ft lbs. Blueprint engines I believe
@rdallas81
Жыл бұрын
Seen it. 300+ hp and 500+ torque.with (mild) turbo (so probably running 12 pounds of boost.
@michaelmarch4950
Жыл бұрын
Like to put the 5.0 coyote in a jeep.
@20tea
Жыл бұрын
So all I need to do to my 07 6.2 Yukon Denali is get a selectable 4wd tcase and some dana 44 front and rear axle! I can then roll with the Jeep wrangler crowd. Also stock up on some sweet rubber ducks!
@jesusisalive3227
Жыл бұрын
I wanna see a Godzilla dropped in one.
@freddunbar
Жыл бұрын
The newly announced 615hp/640tq NA crate Godzilla. 🤤
@jesusisalive3227
Жыл бұрын
@F Dunbar I guess I missed that, I'm also looking forward to the little brother, 6.8L. I still think Ford should use the ci designations for these pushrod motors, it would set them apart and just sound cool! The 445 Godzilla and the 415 Windsor.
@jwilliams703
Жыл бұрын
I would tend to agree that the LT will be the new standard Chevy swap. But the LS is still easy to find for cheap. The 8L80 though should be the standard auto trans used in chevy swap. forget anything else save for the T56 ofcourse.
@RadDadisRad
7 ай бұрын
10L90, the 8L is a garbage transmission that is actually part of a class action lawsuit.
@sheerwillsurvival2064
4 ай бұрын
This perfect been waiting for bugs to get worked out of LS
@WadeGauthier
Жыл бұрын
I have a 2013 Brute with the newest MagnusonSupercharger 420hp 388t.
@colorblind1983
Жыл бұрын
What about GM’s 4.3L six cylinders? They make good power and torque and seem to be a cheaper alternative that’s more powerful than Jeep’s power plant.
@kensnyder9372
Жыл бұрын
Very good fit looks great .....Direct injection , i don't think that is a wise choice , it will not be very long until some one will be taking the heads off to blast the intake runners with walnut shell to remove the carbon build up . My friends shop has done several D.I. engines . I seen one he was working on that the intake port was all most closed off .
@100pyatt
10 ай бұрын
Seems like EGR soot is an issue .. ?
@jimalton1564
Жыл бұрын
I'm just not seeing a benefit to an LS swap any more. A few years ago they were cheap and you could find lots of low mile engines. Now a used LS with 100k is $2500+ here in New England, not much less than an LT. Add in the cost of freshening up the LS and it comes out to the same cost as a low mileage LT. I'm no GM fan but these engines have proven themselves, far more than any of the Hemis. While the LT won't increase fuel mileage for everyday driving much, it should be a lot better when we tow our small camper with our JK. The 14-15mpg we get every day running 38s is pretty impressive, but the 8-10mpg with the camper really hurts. Economy isn't my main reason for doing a swap- power to turn the tires and pull the camper better is- but a little increase in MPG would be a nice benefit.
@mattmcdonough707
Жыл бұрын
There are so many engine kit options, Dakota Customs, AMW4X4 , MOTEC and RPM Extreme . Hard to say what is best.
@Exodus4x4
Жыл бұрын
Not if you’re the guy that installed all of those options. 😉
@jimbradd2783
Жыл бұрын
Not really, do your homework, Motec is much more advanced in the conversion v-8 and tranmissions world for the jeeps
@mattmcdonough707
Жыл бұрын
@@jimbradd2783 I can speak from experience with Dakota Customs. The 6.4 and 8 speed runs great and is just like a factory installation. I have about 10k miles on my swap with zero issues or complaints.
@ReConGrpTx
Жыл бұрын
Looking forward to the Hurricane crate offerings!! A Hurricane HO and an 8 speed would be AWESOME in my JK :-)
@Exodus4x4
Жыл бұрын
Me too!
@johnjubie7144
Жыл бұрын
Do we know if the Hurricane will actually fit in a JK engine compartment?
@davidyoung30
Жыл бұрын
So you went from ls to hemi, and now to lt? Are you by chance biasing your opinions to what you are selling at the moment?
@Exodus4x4
Жыл бұрын
Ummm, no. We currently install Hemis and LT. This is an option for the customers that prefer the GM option. I thought I said that in the video🤔. Also, we quit installing LS because they became too hard to find reasonably priced donors whether they be salvage or crate.
@drakespecialties8351
Жыл бұрын
Put a 2.7l tt from the f150 in it, light with tons of power
@Groovy-z3x
10 ай бұрын
I noticed that the gas cap is farther back than the factory one on the jeep gladiator.
@jeremiaswitt1374
Жыл бұрын
I think I've heard tat the Lt engine has something like 300Lb/ft of torque from 1000rpm just what you want for rock crawling (like a diesel engine) where you want slow speed and good torque tand then they have the 6.6L i think it should make like 370Lb/ft @ 1000rpm (this is almost the torque of an unmodified Ls engine at maybe 4000rpm) very impressive for me
@oldschool6268
Жыл бұрын
I have a LT4 ZL1 and a 6.0 LQ4 chevelle, Still a LS platform. The LS is way cheaper when modded, cam, port injection etc.
@Exodus4x4
Жыл бұрын
Indeed it is. The point of this though is the LT producers more power, more efficiently, in stock form, and includes the 8 or 10 speed transmission.
@ozkrpalminteri9431
Жыл бұрын
U can make more power with the newer ford 5.0 liter engines, and they're super reliable
@stoptrackingme5542
11 ай бұрын
The 8 speeds are having chatter issues with the converter
@AceBrothers17
5 ай бұрын
What about older things like XJ/MJ? Or older TJ?
@100pyatt
10 ай бұрын
4BT Cummins , still be best Jeep swap for trails and daily driving mpg by a huge margin. The V8 is for showmanship and drag racing only
@johnbehneman1546
Жыл бұрын
THANK YOU SO MUCH!!!! I LOVE THE BTUTE AND I LOVE THE LT MOTOR!!! THE LT IS THE NEXT UPGRADE FOR HOT RODDING. SOMETHING TO CONSIDER. GREAT VIDEO AND EDUCATION. THANKS FOR SHARING!!!!
@jasonstorie8740
Жыл бұрын
I just would like a reliable engine in my jk I’m having the rockers replaced as I’m typing this I had a Cherokee with 280.000 miles on the 4.0 and never gave a problem I wish I could afford to have that put in my jk
@4seasonsTrucker
4 ай бұрын
Anybody on here here about the hurricane engine built by the Germans? Heard it will replace both hemi and LS. Great vid btw.
@DieselJLUJeep
Жыл бұрын
Can’t wait to see a 7.3 Godzilla in a Jeep Wrangler
@Exodus4x4
Жыл бұрын
Me too!
@69sound81
Жыл бұрын
This is great, but I already have a vehicle fleet that uses the 6L90 transmision paired with the 6.0 vortec LY6 (basically, an LS based small block engine for HD trucks and SUVs). I love that drivetrain for being reliable as hell and having all the LS based aftermarket support already well stablished. So... does anybody knows a company that makes a good kit to be able to run that drivetrain in a JL or JT jeep? Im planning to add those 2 vehicles to my "fleet" and get them the LY6 with the 6L90 as soon as their drivetrain fails (either transmission or engine). Cuz I plan to keep every single one of those vehicles forever.
@aaronpizzuti8303
7 ай бұрын
Make sure you search GM 5.3 class action law suit before going the LT route. And if you have to have an LT spend the money and take out the DOD camshaft and lifters. You know its an EPIC fail when a company reverses course and starts offering their new motors without DOD.
@keepingupwiththejoness4606
Жыл бұрын
How much do one of these swaps cost ????
@sanjim89
Ай бұрын
If you asking, you can’t afford it.
@Caleb.Casias
Жыл бұрын
No real advantage to doing an LT motor other than the 8&10 Speed trans options, they’re more difficult to integrate, harder to tune, way less aftermarket support. The trans is the only Pro.
@Exodus4x4
Жыл бұрын
Not true at all. Integration is smooth using the RPM harness and we tune them ourselves. Aftermarket in terms of what, cams? The CVVT works so well I wouldn’t even look at cams for these, but that’s an opinion.
@whodahellru8124
Жыл бұрын
@@Exodus4x4I have never understood why people are scared of VVT and choose to delete it’s functionality or lock it out. I know you can’t get a choppy idle, but the perks is that you get a smooth, consistent power band. If I were to tune anything it would be the shifting of the eight speed transmission, and the engine could stay stock and still be a powerhouse.
@jimbradd2783
Жыл бұрын
Not sure on your thoughts, the gm engines and trans are the way to go in any jeep, you just have to get with the leaders in this field, beware of some that's doing these conversions
@cdeprima1209
9 ай бұрын
Yes, plenty of push rod engines that make great horsepower like SBC 400! Carbs, standard transmission and 6 cylinders also not antiquated and work great!
@mschumaker1
Ай бұрын
that truck is way too pretty to take offroading. Give me a ragged out 20 year old TJ with upgraded wheels and 4" lift and a 5.3L truck swap. For $15k, you'll have more damn fun than anything else
@erikkovacs3097
Жыл бұрын
I wanna see a Durmax LZ0 swap.
@LimitedGunnerGM
Жыл бұрын
I’m waiting to see the Hurricane I6 swapped in.
@jsnyder95
Жыл бұрын
Curious to know if the L8T engine would work with this setup. That would be an awesome swap with 400 inches and a lot better low end power
@jarvislarson6864
Жыл бұрын
Yes it is an LT engine also and actually better than the l83 or l86 and lt1 because it is v8 all the time no cylinder deactivation problem waiting to happen
@Exodus4x4
Жыл бұрын
Deactivation gets disabled.
@DEVUNK88
Жыл бұрын
The irony that you need to swap a Chevy motor into a Chrysler product.... Chrysler doesn't have decent engine to swap into their own platform lol
@dustywheeler6641
Жыл бұрын
Need more options for us manual trans guys.
@Rick_Gregor
Жыл бұрын
Be nice to hit the Lotto tonight...lol You would be building me a Bad Ass Jeep!
@realshidd3062
3 ай бұрын
Waaay better than the hemi especially with 10spd
@JesusCruz-qe3kw
Жыл бұрын
Excelente video amigo, Gracias por compartir
@denalidriven1574
Жыл бұрын
6.2 baby.
@MattSanipass81
Жыл бұрын
I bet you save more weight with the Lt swap verses the iron block hemi swap…..
@Exodus4x4
Жыл бұрын
A little bit.
@maxdragon15
Жыл бұрын
Love the mark dice music!😎
@tonyleyba67
Жыл бұрын
IF YOU ARE AT YOUR NEW AND IT'S DONE, HOW BOUT A TOUR.
@Exodus4x4
Жыл бұрын
Coming soon
@benmcinerney5832
Жыл бұрын
Whats a full conversion for a JK cost
@Eric2300jeep
Жыл бұрын
Nah. It's all about the new Hurricane twin turbo I6. Comes in 3 HP flavors as a crate engine that comes with the ECM: 460, 550 and 1,000... Also can be ordered with an 8 speed TorqFlite
@jackl8499
Жыл бұрын
Chevy had a ton of problems with that 8 speed transmission. I have it in my truck and hate it
@jimbradd2783
Жыл бұрын
Where have you been, Motec been doing them for several years
@Exodus4x4
Жыл бұрын
If I wanted to troubleshoot tons of wiring issues then yeah I’d use Motec. We’ve been doing V8 conversions for years working with different companies and we know what works and what doesn’t.
@jimbradd2783
Жыл бұрын
@Exodus 4x4 So do you offer the Lt and 10 sp combination, never seen where you mentioned that being an option?
@erikbrown2682
Жыл бұрын
Lol I wrote u I had this done at Motech 4 years ago and u said it would have problems and not reliable 😂. I’m glad u seen the light cause Iv had no issue
@Exodus4x4
Жыл бұрын
Glad it worked out for you, but considering how many issues we had using their system I’d never install another one from them. RPM has been super reliable.
@erikbrown2682
Жыл бұрын
I’d say 50k Rough miles and 4 years is pretty reliable I even added a magnus 3.0 blower on it and no issues
@notsure1872
Жыл бұрын
Would like to have a standard jeep engine, but built and stroked with forced induction. Preferably a supercharger. Also a lot of lighter and reliable engines around that make great power.
@georgef1176
Жыл бұрын
In a real 2 door jeep the 3.6 is a great option. I supercharged My moms 2013 anniversary 3.6 and it rips.
@beaches2mountains230
Жыл бұрын
THE PENTASTAR V6 ??
@jimbradd2783
Жыл бұрын
You can do what ever you want to, but your v-6 will never run or sound like a v-8
@rdallas81
Жыл бұрын
@@jimbradd2783 Shut up. Your v8 will never run as good as a v12. Lol. There are plenty of v6 engines out there that do excellently.
@jimbradd2783
Жыл бұрын
@Roy Hemion I'm talking about the v-6 on jeep specifically, if you like your little 200 hp v-6 great I'm sure it gets you back and forth to church on Sundays
@gabedaxe477
Жыл бұрын
#OM606 that’s it! I won’t go back to ls or any other crap
@JohnSmith-lw2bm
Жыл бұрын
Did you used the displacement on demand system? Probably not. It just kills the engine anyways.
@Exodus4x4
Жыл бұрын
We always turn it off.
@executive_coach_andyobrien1827
Жыл бұрын
Another great Video!!
@dannydee2929
Жыл бұрын
Curious if Dana 44’s would hold up with this engine or would u have to go to 60’s….?
@Exodus4x4
Жыл бұрын
Depends on the driver but usually you’re ok. Tire size is is usually the bad guy.
@mathiask7959
Жыл бұрын
Wait until the LS4 engine hits the market 3.6 I4 with a LS3 head 360hp and over 400 tq
@Exodus4x4
Жыл бұрын
Not worth the hassle.
@LK-851
5 ай бұрын
Sold my 2019 Silverado because the 8L90 Transmission is Junk. Unlimited information online about problems with those transmissions.
@scrappy7571
Жыл бұрын
Reliable LT and 8 spd trans??? Your kidding right? These shit the bed all the time here at the gm dealer. JUNK The LS is way more reliable.
@DeLonghe_P_Ness
Жыл бұрын
🤔I wonder what options they have available for the Jeeps that come with a manual transmission from the factory...
@Exodus4x4
Жыл бұрын
Depends on the year model. 18+ we can put the Hemi in it.
@murrayhelmer8941
Жыл бұрын
No thanks. I’d go with an LS. Super reliable and. Cheeeap!,
@BrandonSimmons-do6jq
Жыл бұрын
Question: what do you do with the original motor? How does that work?
@Exodus4x4
Жыл бұрын
Sell them if they’re good, junk them if they’re bad
@byronlee6486
2 ай бұрын
Is there a cost savings over the LS for the install?
@ChiefCabioch
Жыл бұрын
Put a 4BT Cummins in it and beef up the trans and transfer case
@Exodus4x4
Жыл бұрын
Those swaps are terrible
@resolutejku
Ай бұрын
Is here room for a dual battery kit like the Genesis? And do you need to use electronic shift levers?
@off-roadskys4250
Жыл бұрын
Will you be doing the LT engine swaps on JL/JT? Currently having a L83/8l90 in my 06 LJ. Would the L86/8l90 in my wife’s gladiator
@Exodus4x4
Жыл бұрын
I hope so, it’s nice to have options.
@IOERROR622
Жыл бұрын
As an LT1 owner I would never put an LT motor in anything. It's an OK motor but it doesn't handle a lot of power and if you wanted to make power it costs a ton to do it. If you want more than 800hp you need some form of fuel system. That means either a stand alone system or larget HPFP, LPFP and Injectors. Either way it's going to cost you 5k just for fuel. FYI I am making 800whp and spent more money into this car than my 850whp CTS-V. And I mean a lot more. Like 3x the amount.
@Exodus4x4
Жыл бұрын
The LT is far more expensive to mod than the LS, but modding they un a Jeep is pointless. This is video is based on keeping the engines stock. In that case the LT is better, but mostly because of the 8 speed transmission.
@dougg8280
Жыл бұрын
What's your thought on Motech putting out their LT1 swap in a JL?
@offroad1911
3 ай бұрын
Am I confused or does he keep calling that Gladiator a JK? And the Gladiator never had the 3.8.
@keniferusxj7047
Жыл бұрын
Everyone wants a hot rod with the look of a jeep…not sure why people think you need a v8 to off-road..oh wait people don’t off-road…just the look 😂
@zapman2100
11 ай бұрын
so whats the weight comparison? seems like a truck engine is much heavier than a car LS engine.
@jasonmurdoch9936
Жыл бұрын
Awesome 💯
@kelvinstrickland263
Жыл бұрын
What do you think about the V6 Penastar Engine 305 plus horsepower 8 speed Automatic transmission around 380 fpt?? and very reliable and plenty around
@tjpadgett9096
Жыл бұрын
So it’s the same engine bruiser is using now as well
@Exodus4x4
Жыл бұрын
Nope
@tjpadgett9096
Жыл бұрын
@@Exodus4x4 ok. What’s different about it?
@Kyle-xt8ip
Жыл бұрын
What is that intro song from? I've heard it on another show for sure.
@madman432000
Жыл бұрын
A Cummins R2.8 would be nice in that too.
@foxolsen5747
Жыл бұрын
My favorite engine. I'd put it in anything that itll fit in. I do love the 2.5l i4 from the yj/tj gens with a turbo on it tho. Reliable beyond belief
@joshuabaker5712
Жыл бұрын
This would be my number 1 choice.
@98durangopack
Жыл бұрын
Godzilla swap the world
@briansouders3664
Жыл бұрын
Great Video! So LT swap for the Gladiator? Is it as compatible as with the JK platform?
@ericzurita343
Жыл бұрын
Every time I watch one of your videos makes me wanna give you all my money. 😭
@FlamaFlanga
5 ай бұрын
Any chance the Hurricane gonna be an option?
@booostedtc
Жыл бұрын
Should try the toyota 5.7
@Jessersadler
Жыл бұрын
do you offer integration kits? Ive been eye-balling MoTechs, and will be pulling the trigger this fall.
@MA4x4GA
Жыл бұрын
Interested in a good swap choice for long desert racing in either my 96 XJ or 93 Nissan D21
@chadharner800
Жыл бұрын
Wouldn’t it be easier to swap the solid front axle in a Tahoe 😂
@299charles
Жыл бұрын
I’m gonna Talk about what I’m here to talk about…….😂
@MICHAELPATTON-f9d
14 күн бұрын
What does it cost to put an L88 in a 2010 jk sport,changs axles etc.?
Пікірлер: 339