Happy to have something to keep my jig in one spot and safe. What do you think of my solution? Anything you would have done differently? Let me know below.
@NWGR
Жыл бұрын
Beautiful job on that. The inlay came out great. I personally would have made the lid hinged, and glued in small blocks of wood or high density foam sized so that they keep the contents from shifting. Kind of like what festool does with their systainers that the tools come in. I need to make one of these for my dowelmax. I bought a few extra pieces and upgrades so a fixed home for all of it would be really nice. Also, I'm not sure how much you work with dowels for things like cabinets or other projects that require two drilling depths, but for me, it was well worth investing in an extra drill bit of each size so I can keep the stop collars at the two different depths. Keep it up! Looking forward to more of your projects. 👍
@MattMadeIt123
Жыл бұрын
@NWGR Great idea about having extra bits set up. I thought about doing a hinged lid. Then I figured out where I was going to keep the box, and a sliding lid worked better for that location.
@markk4015
8 ай бұрын
Another well done video, Matt. That box you made for the jig is beautiful, highend furniture grade. Now all I have to do is buy a CNC. Man, woodworking KZitem videos are expensive! Thanks again for posting. Mark
@MattMadeIt123
8 ай бұрын
Lol! I hear ya. I've spent my fair share on shinny new things I've seen on KZitem, that's for sure.
@telphermangrum4755
Жыл бұрын
Nice clean design. Visually appealing. I think JessEm would approve.
@MattMadeIt123
Жыл бұрын
I think so too!
@derekmangrum7659
Жыл бұрын
Very pretty. Adding a small magnet in the front of the box and the lip would keep it from sliding around, if you were carrying or transporting the box. The lid slides smoothly. Adding small magnets there would help it stay closed until you give it a tug. Beautiful project! I like how you share your 'mistakes' so we can all learn from them! Thank you!
@MattMadeIt123
Жыл бұрын
Yup. I added a magnet a few days after I finished the box.
@arthurlewis605
Жыл бұрын
Looks good…good job!!!
@MattMadeIt123
Жыл бұрын
Thank you!
@delealax
Жыл бұрын
I love this video. You do things with such excellence, MattMadeIt!
@MattMadeIt123
Жыл бұрын
I appreciate that!
@MrMikestoner
9 ай бұрын
Nicely done. Would you consider sharing or selling the vectric for file interior parts holding piece? Thanks
@MattMadeIt123
9 ай бұрын
The design and carve files are available on my website. I just added a link in the description. Thanks for watching.
@tonysilva3429
10 ай бұрын
Very nice. Do you have SVG files for the tools? I have a Shaper Origin as opposed to a gantry system. Watched your other JessEm videos. Appreciate the tips.
@MattMadeIt123
10 ай бұрын
Shoot me an email about the files. Glad you enjoyed the videos.
@robertkrueger3902
Жыл бұрын
Hey there I hope today finds you well. I have a question about Doing and inlay. I am looking to do our house number using an inlay of contrasting woods. Knowing the UV issues and heat issues I experience in phoenix . I was wondering if you have any ideas of wood species that may hold up to UV . Rain is not one of my worries as the house number will be mosty safe from rain. I don't know much about exterior projects . Thank you for the time .
@MattMadeIt123
Жыл бұрын
Ipe, teak, cedar, maple, iroko, white oak...would all be good choices. Finish with Spar Urethane. Good luck with your project.
@romanjohnston
Жыл бұрын
Dude, you have the CNC....you should be selling the design for others who have a CNC and I plan on picking up this master kit and dont have a CNC....you can sell the box for a reasonable price that still puts some nice profit in your pocket. I am sure there are a lot of kits out there without a home. ;)
@MattMadeIt123
Жыл бұрын
I won't be selling the box itself, but I do have the Vectric file and Gcode on my website for those who do have access to a CNC.
@MographMoJo
Жыл бұрын
curious about your design process, how did you accurately get the pockets for the various tools? Thanks for any info provided :)
@MographMoJo
Жыл бұрын
@@1averageamerican ok thanks.
@MattMadeIt123
Жыл бұрын
I just measured each piece and drew the size and shape I needed in VCarve. After some test cuts and small changes, the pieces fit just right.
@mriley52
Жыл бұрын
Are you selling the Vectric file(s)?
@MattMadeIt123
Жыл бұрын
I hadn't planned on it, but that's not a bad idea. Give me a couple of days, and I will have them on my website.
@mriley52
Жыл бұрын
@@MattMadeIt123 Thank you!
@MattMadeIt123
Жыл бұрын
@mriley52 Vectric file and Gcode are on my website.
Пікірлер: 28