The fabrication of that turbine wheel was mighty impressive 👍👍
@brambo4776
4 ай бұрын
Thnx.....
@darkodimitrijevic8496
2 ай бұрын
Yep, indeed 😍
@Mister_G
Ай бұрын
Very nicely done. I have made a similar turbine wheel, so I understand and appreciate the effort involved! 😄
@brambo4776
Ай бұрын
Thnx....
@darkodimitrijevic8496
2 ай бұрын
Very nice video, but unfortunatelly noone talled him that this kinda Turbine has trans- or super- sonic airprophile, not subsonic like most airplane wings/Ventilators. Please don't forget: it "should" spins faster than soundspeed (not subsonic airfoil) 🥰
@brambo4776
2 ай бұрын
I know it all.....This wheel works great and spins max. at 1700 rounds a second....fast enough....Thnx for comment.
@darkodimitrijevic8496
2 ай бұрын
@@brambo4776 Than ok. Thank you for very nice video :)
@rcpowres
3 ай бұрын
Good job!!!!👍
@brambo4776
3 ай бұрын
Thnx
@vladimirvladimirovichputin1352
Ай бұрын
interesting method. obviously not as good as cnc machining but im sure that will still do the job
@brambo4776
Ай бұрын
Thnx Mister Putin...Haha..
@brambo4776
Ай бұрын
These original wheel are not cnc made but hot casted in a mal....
@MASI_forging
Жыл бұрын
Great work dude.👍👍
@brambo4776
Жыл бұрын
Thnx my friend!
@mohammedeid4569
Ай бұрын
Anther idea is u can get it from Hoover motor
@nicolasm7012
10 ай бұрын
Good work. Can't you go up to 120,000 rpm with the inconel 713 wheel? 85,000 rpm is the reasonable limit for a stainless steel wheel, with around 3kg of thrust for a normal kj66. It's a real difficulty to find inconel without breaking the bank
@brambo4776
10 ай бұрын
120.000 is possible with good balance and low exhaust temp.....
@shymon5887
Жыл бұрын
Hi. How did you make the stator? The same method and then weld it together? Or something different?
@brambo4776
Жыл бұрын
Yes 2 rings with blades welded togethet......
@shymon5887
Жыл бұрын
@@brambo4776 thanks
@synth1002
2 ай бұрын
And this should somehow work? I don't know. Why you don't upload turbine assembly with exact this wheel. What about compressor? It is much harder to make.
@brambo4776
2 ай бұрын
Yes..Somehow this works well...See at my channel for some videos.....kj66 Kampturbine...Offcourse the compressor is diffucult to make but its easy to buy.....Thnx for ur comment.
@synth1002
2 ай бұрын
@@brambo4776Great, thanks!
@vladimirvladimirovichputin1352
Ай бұрын
can you please tell me the tool used to bend the blades at 3:24?
@brambo4776
Ай бұрын
Thats just a big steel bolt prepared on the lathe to do the bending job 3:24
@tonybrazier5761
5 ай бұрын
Hi what is the grade of carbide tool you use to cut the turbine wheel
@brambo4776
5 ай бұрын
Use widia metal.......
@lotharzimmermann7589
Ай бұрын
Welche Brennkammer hast du gebaut ???
@brambo4776
Ай бұрын
Kj66 Schreckling Artes....
@holmansolis
Жыл бұрын
Which it was the measures the wheel?, for example the long the blades and thickness....Thanks
@brambo4776
Жыл бұрын
Turbine wheel made by drawings of kampsturbine....blades long 11mm.
@holmansolis
Жыл бұрын
@@brambo4776 Ok... Thank very much
@brambo4776
Жыл бұрын
@@holmansolis do u have drawings of turbine?
@brambo4776
Жыл бұрын
Yes i have......Do u have tools to build?
@holmansolis
Жыл бұрын
@@brambo4776 Yes all my tools are DIY..I do my self for example my metal lathe..Ha ha ha
@farhanagusta6952
7 ай бұрын
what blade was used to make the curve?
@brambo4776
7 ай бұрын
No blade was used!! Curve is radius 12cm......Thnx for comment..
@brambo4776
7 ай бұрын
The bend angleof the blades is 37gr....The profile curve of the blades is radius 12cm....Thnx for comment.
@farhanagusta6952
7 ай бұрын
@@brambo4776 thanks for sharing🙂
@brambo4776
7 ай бұрын
@@farhanagusta6952 At your service my friend!!!
@holmansolis
Жыл бұрын
Excellent...where do you buy inconel material?..thanks
@brambo4776
Жыл бұрын
I got a big rond 70mm piece overhere....Donated 20years ago from a friend from russia.....
@brambo4776
Жыл бұрын
Where are u from?
@holmansolis
Жыл бұрын
@@brambo4776 ok.. thanks for answer me, I'm from Colombia, I’m building a engine turbine too, but I have a problem with inconel material, I dont know where can I get it…Thanks
@brambo4776
Жыл бұрын
@@holmansolis now im on a holiday and return in 3 weeks...i can take of a slice of my inconel and send it to u...
@holmansolis
Жыл бұрын
@@brambo4776 OK Excellent I would appreciate it very much...thank you very much
@marcfonseca3205
9 ай бұрын
Yeah that is pretty but by doing it free hand theres no consistency from one to the next. It will be unbalanced
@brambo4776
9 ай бұрын
Thnx....Offcoursd it need to be balanced!!.... Thats easy to do!...Only not showed in this video...(Bslancing between the fingers ,disk on the shaft mounted and spinning round u feel unbalans...putting a piece of tape on the on one of the blades its possible to find the unbalans....Thnx for reaction.
@KMR__GAMES
3 ай бұрын
This used for rc plane
@brambo4776
3 ай бұрын
Yes. Rc planes
@laor100
3 ай бұрын
It's impossible to find inconel here and probably very expensive
@brambo4776
3 ай бұрын
A raw piece costs €80 euro
@laor100
3 ай бұрын
Sir, I'm having difficulties finding the compressor wheel for the kj 66 I was wondering what other, if any, wheel I can use?
@brambo4776
3 ай бұрын
@@laor100 Any compressor size 66m to 70mm with bore 6,5mm to 7mm will work...I have tryed many different types....They all work...But dont use smaller then 66mm....
@brambo4776
3 ай бұрын
A piece of inconel and a compressor cost around 150 euro...
@laor100
3 ай бұрын
@@brambo4776 Will i need to change diffuser wedge angles if I use other compressor wheel?
@farhanagusta6952
5 ай бұрын
Haai. Can i order this stuf?😂
@brambo4776
5 ай бұрын
U can buy on Aliexpress!.....
@brambo4776
5 ай бұрын
What do u need? Finish one?
@farhanagusta6952
5 ай бұрын
@@brambo4776 ya i need the finish one heheh, Aliexpress has closed shipping to Indonesia haha
@brambo4776
5 ай бұрын
Where u live in Indonesia! Next week i go Bali Java.....
Пікірлер: 75