Thank you for the video; it was really helpful. I just have two questions for you: Don't you need an activator before doing the last step (plating)? And lastly. Can you make a video for gold plating on silver? lots of thanks
@rikardholmgren9491
2 ай бұрын
Hi, I need to know details about your magnetic thing that warms up and rotates !
@ClearMindJewellery
2 ай бұрын
The magnetic stirrer is in our amazon list www.amazon.ca/shop/clearmindjewellery?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfclearmindjewellery_06FK6FGFH0V6AHJ2HDXE
@mcchuggernaut9378
10 ай бұрын
Why I want to set up a home plating system is because I deal with a lot of antiques I want to restore. Many of which have had their original plating worn off over a century or more. The biggest barrier to me has been finding a cheap electrical system and understanding it properly. Any advice on either building one from scratch or an economical one to buy? I see in your video that proper micro-voltage adjustments are important, not just applying a current. Where can I find information on the proper voltage ratings for different metals you want to plate with silver? Specifically, I have a solid copper 1800's tea box that was originally silver plated that I want to re-plate. Any advice for that?
@PhilipMonk-q9w
Ай бұрын
When talking about the anodes you say that the piece you are plating should always be connected to the negative, but when doing the plating you appear to have the piece connected to the positive. Can you please clarify?
@rikardholmgren9491
2 ай бұрын
I would like to see all of your videos, and ask : platinum versus rhodium ? Cheers, Rikard.
@BAstudios5
2 ай бұрын
What volts and amps are used for cleaning?
@LavLean
4 ай бұрын
I plated silver ,but it turned dark. Its doesn’t turn shiny white.
@tonyt5578
Жыл бұрын
"Do as I say, Not as I do" dude, you have the perfect prerequisite to be our next prime minister.
@simonbartlett8759
Жыл бұрын
Hi Dan, I have a magnetic pin tumbler. How long would you tumble a piece like that ring for after plating ?
@puctbridge
Жыл бұрын
Yeah, I hate the chemical oxidization! Impossible to get off without just plating over it, and I just don't like that aged silver look. The ring looks so much better all bright and shiny
@tiffannystipe9626
Жыл бұрын
Okay I have another question My DC power source has fine and coarse amps and volts but it tells me that I have to get up to like a lot of volts to get any amps going so I'm trying to stay around one volt for silver Do you think that's right because the amps don't show up at all until I'm almost to two volts?
@sarahbreivis9691
2 жыл бұрын
Why is the platinum titanium anode in the cleaning solution? I've never used an anode in the cleaner. (with gold plating). But, I'm new to silver on silver. Is it necessary?
@kamelsamer5768
2 жыл бұрын
I believe the light green solution is some sort of nickel alkaline (nickel carbonate or nickel hydroxide) solution because alkaline can remove grease and oil and you also used nickle with nickle solution to keep things ruining?
@Pbrady711
2 жыл бұрын
dissapointing that it came out so dark, you would think there has to be a way to plate with fine silver that comes out bright white from the jump
@TinkerInTheShop
Жыл бұрын
There are solutions called "brighteners" added to the main solution, that give a bright result during plating.
@arturghukasyan88
2 жыл бұрын
How dou you adjust the amp? You put it on maximum?
@ludwigp100
Жыл бұрын
the information that you offer is super valuable
@jacquesomersavard7257
Жыл бұрын
is it possible to do so on stain glass lead around the glass
@طالبعباس-ق3ع
2 жыл бұрын
ماهي المواد نيكل ناري اشتريها وامزجهن كل مراء
@tiffannystipe9626
Жыл бұрын
@Clear Mind Jewellery ok so I have a question, I used this method, I've watched your video like 4 times lol, but my plating was white, after tumbling it flaked off? I used the same tumbling method you just mentioned. What did I do wrong?
@ClearMindJewellery
Жыл бұрын
The current could have creeped higher, sometimes it does that. It also depends on the size and placement of anode. Sounds like it was to thick.
@tiffannystipe9626
Жыл бұрын
@@ClearMindJewellery thank you!
@luispablopascuttini5570
6 ай бұрын
Muy bueno bro, gracias
@leonploetzer7900
2 жыл бұрын
could you substitute the magnetix mixer through a ultrasonic cleaner?
@ClearMindJewellery
2 жыл бұрын
For the cleaning stage absolutely, if we had our smaller ultrasonic at the time we would have used that with the Tivaclean.
@jonhart8185
2 жыл бұрын
What media do you use for tumbling post process?
@ClearMindJewellery
2 жыл бұрын
We use stainless steel mixed rotary shot in our tumbler with burnishing compound.
@michaelkennedy4594
Жыл бұрын
Nice - e demo on how to use Tivaclean - ty.
@ClearMindJewellery
Жыл бұрын
You're welcome!
@eworman42
2 жыл бұрын
Thanks! How much can you reuse this solution? Could you have it last longer if you used a silver anode instead of a steel one to replenish the silver in solution or is that a no-go for this specific solution?
@ClearMindJewellery
2 жыл бұрын
The solution we used in this video specifically called for a stainless steel anode, and it didn't last as long as we'd have liked its hard to gauge or express exactly how long. We went for one that was specifically cyanide free, so it needed some special treatment, however with the more hazardous plating solutions that is typical practice, to have a big chunk of silver/gold as the anode which replenishes the solution as you use it.
@eworman42
2 жыл бұрын
@@ClearMindJewellery That's great, thanks! We've been looking to do something cyanide-free in Canada and it's been tough finding a source for mats. We're going to go with Gesswein's solution too, so this is super helpful :) guess there will still be some experimenting to do!
@ritaparker478
Жыл бұрын
Sterling is nearly pure silver.
@hallmobility
4 ай бұрын
Sterling is 92.5% silver. Copper typically makes up most of the balance .
Пікірлер: 35