It is very clever technique! Excellent instructions. Always delight in receiving one of your links for a new view.
@PJChenJewelryDesign
3 жыл бұрын
Thank you! Cheers!
@ernestoc9987
3 жыл бұрын
Thanks!! You explain very simple!!
@PJChenJewelryDesign
3 жыл бұрын
You're welcome!
@jewelgoldsilver
3 жыл бұрын
Good morning PJ. I admire his work a lot and I appreciate his effort, I have followed him from the beginning and I see that lately the tutorials are more basic, easier and faster. In this case, to make the adjustment between one piece and another you have done it with a straight solid, but it would be better to offset a piece so that it has the same curved shape and has more adjustment and thus avoid corners. It is fine to teach for different levels of knowledge, a good idea would be to separate the exercises into basic, intermediate or expert. A greeting!
@PJChenJewelryDesign
3 жыл бұрын
noted! Thanks for the feedback.
@RionaFinnJewelleryCAD
3 жыл бұрын
Thanks Ms Chen. Lovely clear video, easy to follow!
@PJChenJewelryDesign
3 жыл бұрын
You're very welcome!
@troyflores4184
3 жыл бұрын
Very cool. I can see this being applied to customizing the shape of the links, like the prong cubans that are quite popular
@PJChenJewelryDesign
3 жыл бұрын
that is right!
@wonghuienjezreel4129
3 жыл бұрын
very clear and easy to understand!
@PJChenJewelryDesign
3 жыл бұрын
Glad to hear that!
@nissimt1wito602
3 жыл бұрын
TANKS PJ
@PJChenJewelryDesign
3 жыл бұрын
You are welcome!
@farzanekia2357
3 жыл бұрын
thanks so0o much for this lesson
@PJChenJewelryDesign
3 жыл бұрын
Glad you like my videos. There are more in the membership program. Check them out!
@farzanekia2357
3 жыл бұрын
@@PJChenJewelryDesign sure i will thanks
@maluloa6677
3 жыл бұрын
Thank you!
@PJChenJewelryDesign
3 жыл бұрын
You're welcome!
@SOLChurchMinistries
Жыл бұрын
Hi PJ any idea what i can use to practically see the drawing in rhino with its physics, meaning how can i know where it is touching and that if the chain is alligned straight when it is assembeled and not twisting
@CableFn
3 жыл бұрын
Hi PJ, thank you so much for this lesson. This is my question though, can this chain be printed and cast? Would you cast it with the clasp too?
@PJChenJewelryDesign
3 жыл бұрын
It depends on the size. if the size is big, it is worth to cast it. otherwise, I usually suggest the buy the ready-made.
@subhadipediting7124
3 жыл бұрын
Nice video 👍👍👍👍👍 Thanks
@PJChenJewelryDesign
3 жыл бұрын
glad you like it!
@allenmarc7221
3 жыл бұрын
awesome
@PJChenJewelryDesign
3 жыл бұрын
Glad you like it
@drhus5173
3 жыл бұрын
Thanks 👍👍👍👍👍👍⭐⭐⭐⭐⭐⭐
@PJChenJewelryDesign
3 жыл бұрын
Welcome 😊
@chhunmengleang2953
3 жыл бұрын
Can you teach how to make 3D jewelry with low weight gold? Big style but use low weight of gold. Sorry my English is not good.
@PJChenJewelryDesign
3 жыл бұрын
If you need to reduce the weight of metal, you may need to hollow from the back as much as possible but still can be cast. How much you can hollow out is depends on the design.
@praniltirlotkar5470
3 жыл бұрын
please sir make video of how to make bangle with 2locks
@PJChenJewelryDesign
3 жыл бұрын
what is 2lock? and what kind of bangle?
@praniltirlotkar5470
3 жыл бұрын
@@PJChenJewelryDesign simple bangle with 2clips and lock means where they joined
@mafiaazul16
3 жыл бұрын
My fillet edges do not work, i dont know what i'm doing wrong, i followed all of your instructions
@PJChenJewelryDesign
3 жыл бұрын
I don't know what you did without seeing the model. you can check on this video for solution. kzitem.info/news/bejne/yo1_0Wibpp6imWU
@marcusablpn
2 жыл бұрын
Can you do a Gucci link?
@PJChenJewelryDesign
2 жыл бұрын
check out this video kzitem.info/news/bejne/lqFonGeOi5SWdKA
@margaretliu3409
3 жыл бұрын
👍💪💪💪😍😍😍😍😍💝💝💝💝💝💝
@PJChenJewelryDesign
3 жыл бұрын
^_^
@MegaInformazione
3 жыл бұрын
Modeling is ok, but that's not how jewellery works!
Пікірлер: 42