Two years and still a really easy to follow, useful and helpful video. Thanks!
@MortyJoe44
4 ай бұрын
i'm planning on getting started making my own jewellery, and tutorials like this are so invaluable for folks like me that are just getting familiar with 3d modelling, thanks for posting!
@GraceNoteForge
3 ай бұрын
That's great to hear! Thank you for watching and best of luck on your jewelry making journey! 😁
@faithmeditationofficial
5 ай бұрын
im having trouble at 9:22, when i try and move on the Y axis only one side moves out, and the other looks distorted.
@mycelleismybffl
2 жыл бұрын
I can honestly say this was the best jewelry tutorial for blender i have seen so far. thank you so much!!!
@GraceNoteForge
2 жыл бұрын
Thank you! I really appreciate that. I'm glad it helped 😁
@mycelleismybffl
2 жыл бұрын
@@GraceNoteForge please continue with the tutorials! i'm literally hoping to learn from your vids!
@jhsherwood97
2 жыл бұрын
This was so helpful! I've been trying to learn how to design my own rings in Blender, and this tutorial was just what I needed. Thank you!
@GraceNoteForge
2 жыл бұрын
Im glad it helped! Thank you for watching 😊
@zrHer
2 жыл бұрын
Awesome tutorial, I was ripping my hair out over other Signet Ring tutorials on youtube but this was the only one that made sense to me. Detailed and descriptive, nice job dude.
@GraceNoteForge
2 жыл бұрын
Thank you! I'm glad it was helpful 😁
@abasis.baruti9819
2 жыл бұрын
This video is hands down the best one out there for a beginner like me. Its far and away better than the tutorials produced by a self-proclaimed master! This "master" is definitely good at blender, but he is a rank amateur when it comes to teaching. You, on the other hand, teach with such grace that my confidence and ability with blender has doubled, at the very least. I promised to send you my work when I finished it and I still intend to. Thanks for every second of time you've put into these videos. If you never do another one, you will have helped me get past the utter confusion and frustration I was drowning in just a few weeks ago. Live forever.
@GraceNoteForge
2 жыл бұрын
Thank you so much! That really means a lot 😁 Cant wait to see your work!
@zillaquazar
Жыл бұрын
your video helped me a lot, i needed a ring that goes round at the top and i had no idea it would be as hard as it has been
@GraceNoteForge
Жыл бұрын
Glad to hear that it helped 👍😊
@FaddyVFX
3 жыл бұрын
Here the community is very supportive, i learned alot, and your channel is no exception, eveey video is a new things to leaen, i wish you successful journey.
@GraceNoteForge
3 жыл бұрын
Thank you so much! I'm glad you are enjoying the content. 😊
@FainneOChroi
Жыл бұрын
Great video. Just in case anyone has the same question I did at the end: If apply is greyed out you are probably still in edit mode. Go to object mode and it should work.
@one.0921
2 жыл бұрын
Thank you very very much for this tutorial.... It changed my first steeps with Blender... Big up from France... Free your Soul 🤙
@GraceNoteForge
2 жыл бұрын
Thank you! I'm happy it helped 👍
@serenajuhuisuh
6 ай бұрын
So awesome, would love to see more of these from you!
@GraceNoteForge
6 ай бұрын
Thank you! I just released another ring tutorial today! 😁
@BENBASIL
2 жыл бұрын
I know I already fan-boyed on your last video, but seriously, your videos kick so much ass. Super easy to follow along but I’m actually learning what you are doing and why. And I am COMPLETELY new to Blender, nor have I used CAD for 12+ years. Your videos have already made 3D modeling way less intimidating. I really appreciate you making these 🤘🏼
@GraceNoteForge
2 жыл бұрын
Thank you so much! That's great to hear 😃 I'm happy they are helpful.
@annabellemohamed7802
Ай бұрын
Thank you for this tutorial!
@GraceNoteForge
Ай бұрын
Happy it helped! 😃
@Torfka1
Жыл бұрын
Thank you for the lesson. Very easy to understand.
@Uzumaki350125
9 ай бұрын
Very good tutorial, really made sense to me as a newbie. I'm looking to design some box ring constructions in Blender to give me patterns to cut out of sheet metal, do you know if there's a way of printing off the surface of the Ring to do something like that? Then with your tutorial I'll have everything I need 😊
@WhyWeWatch1
2 жыл бұрын
Thank You! Making a Green Lantern Ring, and this helped a lot
@GraceNoteForge
2 жыл бұрын
Awesome! Happy to help. I've always wanted to try a Green Lantern ring lol
@krissosful
Жыл бұрын
Wow, nicely done. The only thing remaining is proceed it directly to a 3d printer. Thanks a lot for the tutorial. Already subscribed:)
@GraceNoteForge
Жыл бұрын
Thank you so much! 😁
@nyomansuardina6270
2 жыл бұрын
I'm very excited to learn with this tutorial, very practical and very helpful , amazing tutorial. Thank You!
@GraceNoteForge
2 жыл бұрын
Thank you so much!
@reel907
2 жыл бұрын
Grace Note Forge Not sure how long you’ve been at this but you have it down! I am a jeweler, and all my creations are customize through rolling and shaping my metals and soldering them together. I know CAD/3D is the new thing and I would like to learn. CAD/3D can do things that would take me weeks to months to create. I was asked to create a tiara ring for the winners of Mrs Alaska and have a partial re-creation I have carved in wax but have access to a 3D printer
@GraceNoteForge
2 жыл бұрын
Thank you! I've been practicing 3D modeling for years now but I'm still pretty new to jewelry modeling/printing. 3D modeling a tiara ring sounds like a really cool challenge!
@GForge1967
3 жыл бұрын
Great tutorial, been struggling with blender this helps a lot so thank you also are you self taught with blender on did you do a course
@GraceNoteForge
3 жыл бұрын
Thank you! I'm happy it helped. I am self taught when it comes to Blender :)
@Dan-t8w2z
24 күн бұрын
when I add the subdivision surface modifier i get what looks like a split in the very top and bottom, where as your goes smooth straight away, any fix?
@willanski4321
7 күн бұрын
I get this exact same issue - did you fix it??
@ODVINE
7 күн бұрын
No haven’t managed to fix it, I now make signets with a different technique
@willanski4321
7 күн бұрын
@@ODVINE I found another comment on this vid which had a fix. Go back to the mirror modifier and make sure it's just the Y axis that's selected. I had Y and Z selected - just making sure it was Y fixed the issue!
@hubertrzepecki2263
3 жыл бұрын
perfect lesson, we want more
@GraceNoteForge
3 жыл бұрын
Thank you! ill be sure to post more tutorials when I can.
@victorgomezsa
11 ай бұрын
Thank you very much!!! Very helpful!!!👏
@alexhummel1320
10 ай бұрын
super helpful bro thank you
@Cloudyyyy88
3 ай бұрын
Do you have any idea on how i could model a signet ring, and then change the internal ring size, while keeping the ring thickness and top size the same, if that makes sense
@GraceNoteForge
3 ай бұрын
The best way I've found so far is to use a lattice modifier and increase the resolution to have more control points. Then you can scale the whole thing up or down and adjust the top points for a different thickness. It takes a bit of tweaking sometimes but has worked well for me. 👍
@Cloudyyyy88
3 ай бұрын
@@GraceNoteForge thanks so much for the response, iill give it a go
@Cloudyyyy88
3 ай бұрын
@@GraceNoteForge also i have noticed using subdiv modifier, it makes the internal size of the ring smaller, as its smoothing it all out, is there anyway to avoid this? adding loop cuts and creases hasnt seemed to help
@sejaaguia8020
2 жыл бұрын
Thank you so much for sharing!
@Originallyright
11 ай бұрын
Thank you for sharing 😊
@zaizai7974
2 жыл бұрын
Hey man! Your content is great but I am struggling at 6:40. No matter what I seem to do when I try to make the top part of the ring of the ring bigger using G, S and even E it changes the shape of the entire ring instead. What can I do?
@northernfrost
Жыл бұрын
is your proportional editing on? it should be off.
@外国文化保存会議
2 жыл бұрын
wow this is amazing thanks so much
@GraceNoteForge
2 жыл бұрын
Thank you for watching! 😁
@victorgomezsa
11 ай бұрын
By the way, what would be the best technique/tools in Blender to place a logo or a small text on the top base of the ring and make it look embossed? Thanks in advance!
@ttanizawa901
11 ай бұрын
I'm a bit confused on scale. When you start off modeling this you specifically say "millimeters" but it's set in meters.
@Cap_Laberinto
2 жыл бұрын
Very good result man!
@PeshkaNavalnogo
Ай бұрын
thanks a lot!!
@MAJAY-tv8nu
Жыл бұрын
I have a problem at 6:30, when I click G+Z it doesn't bring up the thickness, but rather it moves everything up...
@AnnaAscends
Жыл бұрын
I'm having the same issues too
@AnnaAscends
Жыл бұрын
fixed. turning portional editing off - comment mentioned earlier vvv
@GForge1967
2 жыл бұрын
Hey mate quick question having a bit of trouble at the 12.44 minute mark my faces turn into lots of small squares when i try to use the insert function instead of all going in together . any thoughts ? when trying to raise the inside of ring
@GraceNoteForge
2 жыл бұрын
In the Inset Faces dropdown menu, make sure "Individual" is unchecked. Otherwise it will inset each face separately.
@benhurisksal1964
Жыл бұрын
Thank you very much for your content! I would appreciate your help on 02:50. How to make the influence circle larger when I dont have a mouse?
@getinmybelly4ever
Жыл бұрын
if you're using a trackpad, scroll up using two fingers the same way you would scroll a webpage
@monolito5153
Жыл бұрын
Hi, thank you very much for the video. I would ask what is the name of the software that show each step you did with the mouse or keyboard.
@kotmakcep8769
3 жыл бұрын
strange but simple modeling technique. interesting. but I prefer to make the rings through the curve modifier. then there is a possibility of resizing with less problems
@abasis.baruti9819
2 жыл бұрын
I've used this tutorial to design a ring that is something like a low medium complexity. I actually had to go back and resize and I didn't have any issues with the physical outcome. Tell me, what problems do you foresee with this method? Genuinely curious.
@kotmakcep8769
2 жыл бұрын
@@abasis.baruti9819 well, for example. you need to make sizes from 16 to 23mm for mass production, they should be the same, differ only in size. plus in the video it's just a blank, and if you add decors. this is where the problems start. BUT for a single item, this method is probably the easiest and fastest
@abasis.baruti9819
2 жыл бұрын
@@kotmakcep8769 thanks for the reply. Definitely something to keep in mind. What other method would you recommend? Hungry for knowledge.
@kotmakcep8769
2 жыл бұрын
@@abasis.baruti9819 complex and voluminous topic. blender gives very great opportunities for paremtric modeling. A lot is automated in the Jewelcraft addon. but I recommend understanding how they work, a lot is done simply by adding modifiers, constraints, drivers, and of course their combinations. can't describe in a nutshell
@abasis.baruti9819
2 жыл бұрын
@@kotmakcep8769 I catch your drift. I started with a uDemy course that focused solely on parametric objects.
@kylekoren2631
3 жыл бұрын
I must be doing something wrong when I get to the shaping stage and I select the top 3 vertices as you did, but when I got to extrude them the whole ring deforms. Any idea what I did wrong? Love the video tho well done mate.
@kylekoren2631
3 жыл бұрын
Nevermind i worked it out i forget to turn off proportional editing.
@GraceNoteForge
3 жыл бұрын
Sorry I didn't get to answer in time. I'm happy you figured it out!
@LONDONBOY10
3 жыл бұрын
nice tutorial, just an alert, you working with meters and not millimeters, everytime you said millimeters you typed M and not MM, so blender created a big ass 9 meters ring out of proportion, but very good tutorial at all.
@GraceNoteForge
3 жыл бұрын
Woops! lol Thanks for the heads up and for watching!
@elishaevergreen2510
Жыл бұрын
hitting 3 on the num pad doesn't do anything when in in the blender app, is there another way to get that side view?
@aliasmiles6711
Жыл бұрын
When I bump up the thickness of the ring, the measurement goes to -2.2m but when I go the other way (inwards towards the center of the ring ) it goes to the +. Any reason why measurement is going the opposite way? thanks
@sarahgriep6213
2 жыл бұрын
does anyone know why when I try to change the shape of the top it moves the entire ring and not just the selected vertex? would love some troubleshooting ideas. Thanks!
@GraceNoteForge
2 жыл бұрын
My best guess is If you're using the preposition editing, sometimes the area of influence is too high and moves everything. Try scrolling your mouse wheel down (if proportion editing is turned on) to only adjust the vertices you want.
@beaumcloughlin413
Жыл бұрын
unfortunately once i got past adding the modify stage no mater what vertices i select, clicking G,Z moved the whole model instead of just what i selected in edit mode and i was unable to continue im using blender 3.3. how do i fix this ?
@beaumcloughlin413
Жыл бұрын
in an idiot i forgot to minimize the scale on the mouse wheel button XD thats why it was moving everything
@carlosalvarez-vi3os
2 ай бұрын
hola, estoy comenzando a usar blender, pero no se como hacer aparecer el panel de edit para el looptools en el minuto 7:51, alguien podria ayudarme, tengo la configuración de fabrica del programa, versión 4.2
@Wlhrnkl
6 ай бұрын
I’m stuck at 6:30, when I try to hit g and z to make the top of the ring thick the whole ring stretches instead, any suggestions?
@dopesmoky
20 күн бұрын
you have to turn off proportional editing, from when he says to set it to sphere at 2:30
@tysonoak
Жыл бұрын
I’m struggling with move at 6.10 minutes, when I select the mesh it moves the hole ring, can someone help me, I’m using version 3.6
@heidona2
4 ай бұрын
What model of 3D printer do you have?
@GraceNoteForge
4 ай бұрын
I use a Phrozen Sonic mini 8k
@heidona2
3 ай бұрын
@@GraceNoteForge thank you so much
@shambhurajpanhalkar3989
2 жыл бұрын
very nice ❤❤❤❤❤❤❤
@memedrawing777
7 ай бұрын
min 4:07 Why when I use solidify, the ring gets thicker but like diagonally and not even?
@memedrawing777
7 ай бұрын
Ya supe como, es que por error tenia vertices duplicados al extruir 2 veces, y por eso se solidificaba mal, asi que tuve que eliminar los vertices duplicados seleccionando todo con tecla A, F3, escribi merge, y clic en by distance. Y asi se unificaron otra vez mis vertices 😁
@bwaanthony9355
2 жыл бұрын
How can I make a nice little border raised up border of the ring so I can set diamonds???
@ctgfury8960
2 жыл бұрын
hello i cannot see the mesh symmetry option at 5:58 could you help please?
@Beeru24K
2 жыл бұрын
At 08:14, when I dissolve the edges I cannot get rid of the edge in the middle. An edge along the Y-Axis remains and will not dissolve! How to fix this?
@savagestation727
2 жыл бұрын
i have the exact same issue
@bosm3r
Жыл бұрын
@@savagestation727 also having the same issue
@bwaanthony9355
2 жыл бұрын
Hey Guys I also Need Help I just Made A Ring and I’m adding stones using jewel craft but the stones show up behind the ring.SUPER ANNOYING, I can’t do anything to make the diamonds show up on top of the ring. It’s like the diamonds are locked behind the ring layer 😭
@jacquiewiegand6323
2 жыл бұрын
i know you got more then one blender jewelry tutorial, can you please make a play list? Too much other stuff mixed, its confusing
@GraceNoteForge
2 жыл бұрын
I don't have many at the moment but I'm working on making more. Ill definitely make a playlist for them. 👍
@motoronvlogs214
3 жыл бұрын
mines not perfect cirlce. how come there's a line both top and bottom of the ring? -_-
@Streamcatcher
2 жыл бұрын
If you have a seam where the two mirrored parts meet and clipping is not enabled in the mirror modifier, you get a sharp upstanding edge. Is that what you mean?
@hanneswelthagen9747
2 жыл бұрын
When you added your mirror modifier and you clicked on the Y axis, you did not unclick the X axis. Only the Y axis should be selected. Took me two days and several restarts to realise what was happening.
@DeniedGrace
2 жыл бұрын
@@hanneswelthagen9747 Thank you!!!! I was so frustrated and couldn't figure this out. You solved the problem.
@Ben-lp7xo
Жыл бұрын
@@hanneswelthagen9747 that’s fixed it !!! thanks so much
@willanski4321
7 күн бұрын
@@hanneswelthagen9747 OMG I love you haha been scratching my head with this for hours haha
@northernfrost
Жыл бұрын
instead of a sub div to 5, couldn't u just subdivision 3 then shade smooth to save memory
@ChristianSalidaga-h4e
4 ай бұрын
Unhide key is not working :(
@AudiobyDiid
Жыл бұрын
can i have the file were u have as a template ??
@larrymoremckenzie3029
Жыл бұрын
I just seen a recomendation on tic-toc ,if you trying to use blender on a Mac just delete it save yourself some time and trouble!
@gucc739
9 ай бұрын
What about the measurements?
@brobiv2452
10 ай бұрын
hey everyone oK BRO
@Dan-t8w2z
23 күн бұрын
4:46 when I add the subdivision modifier I get a line through the very top and bottom, how do I fix this, I've followed exactly how you have done it in the video
Пікірлер: 121