❤ Thank you for sharing your designs and how-to skill to inspire us. Thank you! ❤
@pathubbard6934
Жыл бұрын
Another wonderful tutorial. Thank you🥰
@4girlsjewelry
Жыл бұрын
Thank you! 😊
@aliciawelch1473
2 жыл бұрын
I think I'm gonna have to go buy a torch just because of you 🤣🤷♀️
@4girlsjewelry
2 жыл бұрын
I LOVE TO HEAR THAT:)))) WE CAN WIRE WRAP TOGETHER
@Mv-nx8es
2 жыл бұрын
Ciaooooo ….. beautiful simple and impressive , congratulation . I alwais follow you in your wonderful tutorials.
@4girlsjewelry
2 жыл бұрын
Thanks so much 😊
@pollyblack4432
2 жыл бұрын
Lovely!
@4girlsjewelry
2 жыл бұрын
Thank You!!!! It’s very easy to make ❤️
@amberm2777
2 жыл бұрын
Reminds me of spine vertibre, so cool 🥰
@4girlsjewelry
2 жыл бұрын
YEA!!!! I CAN SEE IT!!!!!
@Ascensiion1
2 жыл бұрын
Oh! Those earrings are lovely and you're right, they are very fluid and so feminine. I love all the little gems you use. Thank you dear Tanya for all the work, techniques and dedication you've shared with us. Take care and stay vigilant! 🦋🦋🦋
@4girlsjewelry
2 жыл бұрын
Thank You!!!!! Truly, truly appreciate it ♥️♥️♥️♥️
@rosanalbandian2572
2 жыл бұрын
Yes, these earrings are AB FAB. Your ideas and creativity are amazing. Thanks again for sharing. I check out every one of your videos that I can find. They are all great. Always learn something, tips on coiling, weaving, torching, patina and polishing and all your wonderful designs. Looking forward to next Tuesday!
@4girlsjewelry
2 жыл бұрын
Awwww!!! U made my day ♥️ THANK YOU 🙏
@peggykirby2377
2 жыл бұрын
You can hold things down with a popsicle stick to save your finger ❤
@4girlsjewelry
2 жыл бұрын
THANK YOOOU!!!
@valeriethomas5126
2 жыл бұрын
Tanya i love your ideas,so beautiful 😃🇯🇲
@4girlsjewelry
2 жыл бұрын
Thank You!!!! Simple, any easy to make
@theresaamandola7676
2 жыл бұрын
Learning my torch skills🤣 Thankyou always for sharing your creativity! Love Tuesday's lessons ❤️
@4girlsjewelry
2 жыл бұрын
Thank You!!!!! Very easy:)
@MNatale425
2 жыл бұрын
❤️❤️❤️
@4girlsjewelry
2 жыл бұрын
Thank You ♥️
@lulu43751
2 жыл бұрын
Oh Tanya you can't believe how much I appreciate this tutorial!! Not sure if you've watched the series White Lotus, one of the characters wears these beautiful fish bone earrings and I've been trying to figure out how to put them together and you have just given me the answer. Thank you so much!!🙏🏻❤❤
@4girlsjewelry
2 жыл бұрын
You are so welcome!
@barbarajeaniesjewels
2 жыл бұрын
Love your designs! Amazing work!
@4girlsjewelry
2 жыл бұрын
Thank you!!! Appreciate it:)
@kimdahlquist5480
2 жыл бұрын
How nice to begin my day by watching one of your wonderful videos! These earrings are fantastic! Do you have an online store where you sell your creations? Thank you inspiring me to create. 😊
@4girlsjewelry
2 жыл бұрын
Yes, i do:) Check my website 4girlsjewelry.com I need to update more often, but I always VERY busy to create
@4girlsjewelry
2 жыл бұрын
Also, let me know what u like, and I can post it!!!!!
@lesabarnum9318
2 жыл бұрын
Can you give us a tutorial on how you make the balls on the ends of your wire
@4girlsjewelry
2 жыл бұрын
I did already:) please check my broomstick earrings tutorial! I show how I made them and torch i use
@diannaholden312
2 жыл бұрын
I’ve watched almost all of your videos and I am now ready to purchase a tumbler. Can you please tell me a good one to purchase along with the shot and cleaning agents. Do you machine buff you pieces or only hand buff. Is also like to know what hand buffer you use. Do you make all of your own jump rings and if so what gauge wire would you recommend. I know this a lot to answer and I apologize for being so excited to get started. I love your work and would also like to let my personal creative side come out in the wire. Have a blessed day 💕 Dianna
@4girlsjewelry
2 жыл бұрын
Welcome, Dianna!!!! I make my own jump rings too!!!! Check my jump rings tutorial!!!! Very easy to make with proper tool! I’m MORE then happy to share anything I know!!!!! Let’s WIRE WRAP together!!!!
@rosanalbandian2572
2 жыл бұрын
it seems like forever that I haven't worked on any pieces. Been sick with the flu and have been waiting for my new torch. Have been reviewing your videos in the meantime. I finally received my new torch (yesterday) with an on/off switch. I made a few balled pins. Some came out with good sized balled ends, while others came out small and with a tiny pin sticking out of the end. I must not be holding the wires right. It is a good strong torch. Any suggestions? Am looking forward to your new Tuesday video. Stay well.
@rosanalbandian2572
2 жыл бұрын
I purchased a real torch today and will try it tomorrow. My old torch, I bought before covid is culinary torch, it is NOT strong. I was able to ball 24 ga wire, 22 ga took forever and forget about 20 ga. I even tried 16 ga, I held the flame on the 16 ga end for so long that the fuel ran out of the torch. The cut end of the wire did not change at all..very frustrating. The only good thing about the culinary torch is that it is small and easy to handle. It would be great if it did what I wanted. LOL
@4girlsjewelry
2 жыл бұрын
Yea, that one is not powerful enough for sure. Let me know how u like ur new one
@consueloyoung4484
2 жыл бұрын
These earrings are adorable Tania, I love them. You are right, they look easy to make. Can you please tell me where you purchased the tube beads, they look very practical for many uses. Thank you again for being so selfless and sharing all your knowledge and wonderful ideas. You must dream in copper!!!. lol 🙏🏼💗💐
@4girlsjewelry
2 жыл бұрын
Awwww! Thank You!!!! I do dream in copper 😂 About beads,I got tons of very old beads from my local bead store ( they did not survive Covid) and when whey clean basement lots of glass they had were from different countries, and pretty old ( 40 years in business ) so I purchased quite a lot
@rosanalbandian2572
2 жыл бұрын
by the way, that is the 3rd torch I have tried. Others go back to the store.
@4girlsjewelry
2 жыл бұрын
Wow! Hopefully u going to love this one And when u love it- u going to be sooo happy, making incredible jewelry
@sharioncarpenter8293
2 жыл бұрын
Very cute design! Lots of ways to use this idea. Thank you for sharing! I love your ring! Did you make it? 💕
@4girlsjewelry
2 жыл бұрын
Thank You!!!! No, ring I got as a present:) also hand crafted:)
@lynnseresin8305
Жыл бұрын
Tanya, did you solder the wire leaf-shaped element that you added to the fishtail? If so, could you provide some soldering tips to newbies like myself. I just purchased some tools/materials to get started on simple soldering, but I'm a little nervous about how to start. There are some pretty good instructional videos out there, but yours are my absolute favorite!
@4girlsjewelry
Жыл бұрын
Yes it was soldered .... my ex husband did... i still dont solder... i think its my next step... and i will film if i start:)))
@lynnseresin8305
Жыл бұрын
@@4girlsjewelry I'm intimidated by soldering the way I was intimidated by the torch. I got over my fear of the torch and it's been so liberating. I'm determined to overcome my soldering phobia! By the way, your unique approach to jewelry design has been so freeing. I love the organic quality of your work, how no two pieces are exactly the same, and that you throw symmetry (mostly--not with respect to earrings, of course) out the window!!! It's refreshing and re-invigorating!
@4girlsjewelry
Жыл бұрын
thank you!!! I believe u can create amazing art only when you FREE :))))
@Bevoe
2 жыл бұрын
Hi Tania, I was wondering if you oxidize your copper ear wires or just leave them bare?
@4girlsjewelry
2 жыл бұрын
I always oxidize and protect the whole piece
@MikoGenee
Жыл бұрын
Hi! Nice video! What kind of pliers are the orange pair? What brand? I haven't been able to find any chain nose pliers like that.
@4girlsjewelry
Жыл бұрын
Those are from Home Depot😂
@rosanalbandian2572
2 жыл бұрын
it seems like forever that I haven't worked on any pieces. Been sick with the flu and have been waiting for my new torch. Have been reviewing your videos in the meantime. I finally received my new torch (yesterday) with an on/off switch. I made a few balled pins. Some came out with good sized balled ends, while others came out small and with a tiny pin sticking out of the end. I must not be holding the wires right. It is a good strong torch. Any suggestions? Am looking forward to your new Tuesday video. Stay well.
@4girlsjewelry
2 жыл бұрын
I like my torch a lot, I can make tons of balled pins in no time… if u have tiny pin sticking u just remove from fire to quick, also try do it in a angle , not pointing fire from straight angle, i do it even without thinking…
@4girlsjewelry
2 жыл бұрын
Recover soon!!!!! And with great weather we can start WIRE WRAPPING
@rosanalbandian2572
2 жыл бұрын
@@4girlsjewelry Thank you.
@rosanalbandian2572
2 жыл бұрын
@@4girlsjewelry Thank You.
@amberm2777
2 жыл бұрын
Find the place in the flame where you begin to see green appear that's when I know I have found the sweet spots, experiment, you'll see what I'm talking about ;)
Пікірлер: 60