Thank you for making informative content about a niche topic.
@zaserker1851
3 жыл бұрын
Thanks for the info, video of imppecable quality as always. I was lucky to find this channel before the prices started rising up on xeon builds in general.
@Miyconst
3 жыл бұрын
The prices should be back to normal in a little while, I already see Huananzhi X99-BD4 motherboard for about €80.
@humannik9841
Ай бұрын
@@MiyconstGreetings friend. I bought this motherboard, but I have problems. My network card does not want to work at 1 gigabit. I would like to ask you, do you have a normal BIOS for this board where everything works as it should, including the undervolt of the V3 processors? I would be grateful if you have a link. Thank you. Glory to Ukraine.
@ripwildy2022
3 жыл бұрын
so glad I built my 2678v3 system with the Huananzhi X99TF back when prices were still reasonable! wouldn't even consider building one now with the current market situation.
@Miyconst
3 жыл бұрын
Yeah, these days Huananzhi boards are priced ridiculously.
@zendro6572
3 жыл бұрын
Was literally just going to search for this video from you and see it upload today :3
@Miyconst
3 жыл бұрын
Thanks for the support, the video was planned for yesterday, but I didn't manage to finish editing.
@borisgonzalezjulian5260
4 ай бұрын
@@MiyconstHola ,quería hacer una pregunta, es posible insertar resizablebar en esta placa madre?
@Miyconst
4 ай бұрын
@@borisgonzalezjulian5260 it surely possible.
@borisgonzalezjulian5260
4 ай бұрын
@@Miyconst Muchas gracias,me encantan tus vídeos,e comprado esta placa madre para mí 2697v3, podrías hacer un nuevo video testeando la placa con algunos procesadores y con la nuevas BIOS actualizadas y con rebar ☺️,un fuerte abrazo
@borisgonzalezjulian5260
4 ай бұрын
@@Miyconst que undervolt me recomiendas para el 2697 V3 con esta placa madre?
@bytchgg
3 күн бұрын
thank you for the review, im using this jginyue x99 d4 titan mobo. i was using the huananzhi x99 but it got bended pins.
@Graphics_Card
3 жыл бұрын
I saw that motherboard at the shop on AliExpress. Your information is on point!
@Miyconst
3 жыл бұрын
Thanks!
@Androgenies
10 ай бұрын
Very detailed and informative review. Thank you for posting this. I am planning to buy one of these motherboard and I was afraid I would not find a proper review out in the wild. This is really helpful. Thank you, good Sir!
@Miyconst
10 ай бұрын
You are very welcome.
@fernandoanatomia
3 жыл бұрын
Thank you for keeping x99 platform on topic. I have a zx_99ev3v1.31 Atermiter motherboard for almost a year and maybe I'm luck to not have any issue. I only complain about the fixed value for the motherboard temperature and the lack of pwm modulation of the fans other than the cpu fan. I'm using it with 2620v3 and Rx 570. Has anyone tried Ultimate Patch Tool on this motherboard?
@Miyconst
3 жыл бұрын
Not every ZX motherboard dies fast, some of them work for a long time, otherwise people would not buy them at all, but the overall quality is pretty low.
@fintrollpgr
3 жыл бұрын
Non working IME is actually a big plus in my book, turning off that potential backdoor/security risk is a good feature. Not having it work at all is just icing on the cake.
@Miyconst
3 жыл бұрын
Not working and not existing is a different thing. I also prefer BIOS without IME, but a broken IME causes very long Windows boot and other potential issues with Windows updates.
@gustavogoette2333
3 жыл бұрын
Damn!!! It looked very promising until you said it was a B85 chipset.... Thanks for your excelent work as always...
@Miyconst
3 жыл бұрын
Thanks for the support!
@Rendraco79
Жыл бұрын
Excellent video, as usual. God bless you brother. Greetings from Colombia
@pramodravisanka5277
3 жыл бұрын
Many thanks for the usefull and clear information 👍
@Miyconst
3 жыл бұрын
Thanks for the support!
@reinerfranke5436
3 жыл бұрын
I am happy that 4 years ago i bought a returned ASUS Z10PE-D8 for 200€. I select the Z10 for running 2x ES E5-2628L (55W), 4 PCIe16x and Win7 support. 3 Bluescreens in 4 years at 24h/365d use because of a later added Radeon 7970. Now looking for V4 ES. Thank you for the great infomation and save unlucky customers.
@Miyconst
3 жыл бұрын
Asus Z10 is a great motherboard, if you have a use for a dual socket machine.
@reinerfranke5436
3 жыл бұрын
@@Miyconst This Z10 board i use for a 24h daily to host virtual machines and the ES E5-2630L V3 have relative low idle power consumption which is a critial thing with other server boards. Actual a Ryzen 3300X for 160€ and B450 for 60€, and upgrade to 5800X is much more effective. But the decision for the virtualization host was 4 years ago.
@scottstamm7022
2 жыл бұрын
Thanks for your video! I bought this board for my home server, a E5-2697 V3, and somehow managed 4x 32GB 2133mhz ECC DIMM's. I had to use the -80mv P-State boost mod as -100mv resulted in constant issues. I recommend this board, for sure!
@Miyconst
2 жыл бұрын
Thanks for sharing your experience. I have heard that this board works with Huananzhi X99-BD4 BIOS, so this is something to experiment with.
@scottstamm7022
2 жыл бұрын
@@Miyconst your video was the only English speaking one I found. I've posted my build over on Level1Techs where others build similar stuff. I was using adapter cables to use add in cards beyond what the ASRock B450m Pro4 is capable of, and was causing numerous IRQ issues. Now I'm using this board, with the Xeon CPU, and twice as much RAM as before, and it's taken every huge workload I've placed on it, in stride! Thanks again for the video, it helped me out quite a bit!
@IPTVExpress
6 ай бұрын
thank you ❤❤ its now cost around 45$ so my score will be 9 out of 10
@conflictinfocus
2 жыл бұрын
i bought X99 Motherboard Set With E5 2696 V3 CPU Processor 64G RAM yesterday, and just came across this video. I hope I wont have any issues with 18 cores !
@RANDOM-ix6pn
3 жыл бұрын
You Rock!. Your lastest advice about my question with QQLT and ram Speed and latency is correct, all is working fine!, thank you!
@Miyconst
3 жыл бұрын
Thanks Adiel!
@mg95tux
3 жыл бұрын
Thank you, now doing a many-cores xeon build seems more like playing the 3 cards game, first you don't get CPUs at decent prices, then RAMs, now seems that boards are gone... WTF!
@Miyconst
3 жыл бұрын
Yeah, it's a very annoying situation. With the current X99 prices I would rather buy an LGA 1151 mutant.
@MoStacheMoCash
3 жыл бұрын
@@Miyconst I'm considering doing it but the bare die makes me nervous.
@bruhbruh9685
3 жыл бұрын
Thanks to file coin the xeons are getting more expensive because the more PCI lanes it has the more storage can get, it's pretty sad for these xeons to go like that but we can't do nothing about it, the only viable option i see it's getting LGA 1151 Mutants
@Miyconst
3 жыл бұрын
@@MoStacheMoCash it's alright if you use a cooler with a flat surface.
@KH_1
3 жыл бұрын
12-14 cores v3 are still expensive, but 2640-60 v3 are cheap now, still worth for budget build.
@wood6454
7 ай бұрын
Appreciate the comprehensive review! I've spotted the motherboard for 44 euros in my nearby marketplace. However, I'm a bit apprehensive about the CMOS reset issue. But if the BIOS has reBAR support out of the box, then I'm definitely making the purchase. Do you happen to know if it does?
@Miyconst
7 ай бұрын
I know that it definitely doesn't have ReBar out of the box, at least the one I tested didn't have.
@arkem5537
3 жыл бұрын
Can you test the Huanan AD4 ? Thanks 🙏🏼 Also very good video 😀
@Miyconst
3 жыл бұрын
I could do that, but the current AD4 price is completely pointless.
@arkem5537
3 жыл бұрын
@@Miyconst Or you could test the Huanan BD4. But is it similar to the ZD4 ?
@erasmojardim2121
3 жыл бұрын
thanks man! Great information
@Miyconst
3 жыл бұрын
Thanks for the support!
@zkf5448
2 жыл бұрын
I saw it listed with 16 gb of ram and 2666 v3 for a good price, should I go for it? I would use it mainly for gaming, and use the rest of the pcie slots for mining, would I encounter any problems that’s the only important things for me.
@Miyconst
2 жыл бұрын
There is always a risk to get problems when buying stuff from AliExpress. Jginyue X99-D4 could be an interesting option, if the price is right.
@zkf5448
2 жыл бұрын
@@Miyconst I will go for it and will update this comment about the quality of the motherboard, thanks for replying I really appreciate it.
@sergeleenders6122
2 жыл бұрын
Thank you for your videos always so complete. I finally received my titanium motherboards thanks to a friend in China. I already have an E5 2640v3 on an X99plus D4. Would it be worth buying an E5 2660v3? The fan is simply screwed onto the radiator and a plate is glued over it. I will remove everything. My case is well cooled by 9 120mm fans!
@pabl9a647
25 күн бұрын
Hello, I have this board, Jginyue X99 Titanium D4, with ECC RAM and a 2690V4 processor. Memtest86 indicates that ECC is disabled. Where did you enable it? I can’t find the option anywhere in the BIOS.
@Miyconst
24 күн бұрын
Hi. This video has the answer: kzitem.info/news/bejne/qaWwr4hokV-UfqAsi=nzSiuxA98JlZiQsE
@RafitoOoO
3 жыл бұрын
Thanks for another great video. Have you seen the new i9 11900K QV1K? Seems to be better than that QVYE.
@Miyconst
3 жыл бұрын
Yes, I have seen that ES CPU, but the price isn't good at all.
@fergusferguson4782
3 жыл бұрын
If I were starting out I would go for the E5-2699V3 as best bang for the buck. I have an E5 2690 V2, and my only upgrade path is to go dual processor, with new MOBO, CPU, and cooler. $300. A 2699V3 is just over $200, add $100 for a MOBO, and you are at a slightly slower Passmark score, but less power consumption, and lower system complexity. But you also don't get to tell your friends you are running dual server processors.
@Miyconst
3 жыл бұрын
What would you do with such a system? For gaming it's pointless.
@fergusferguson4782
3 жыл бұрын
@@Miyconst I don't game. I use it for video processing/storage. Multiple cores. Blu Ray and DVD drives. Multiple drive bays. Chugs away and never gets hot. 20 processors running at 100%, and the fan hardly even speeds up. Noctua. I have a gaming PC with an RTX 2060, and i7 10700K and the thing gets hot, the fans all go wild, and it sounds like it is going to take off. It is faster, but I don't care about that. Oh. It also cost $1,700 vs my home made one. That was $600.
@Miyconst
3 жыл бұрын
@@fergusferguson4782 then I can understand why you would want a Xeon CPU. I always have a happy smile when people use these Xeons for some background tasks or other sorts of processing, but it triggers me when people assemble dual socket gaming machines with two water blocks and lots of RGB with a simple reason: "it looks so cool".
@fergusferguson4782
3 жыл бұрын
@@Miyconst No RGB or water blocks. I actually have never even put the side panel on since I built it 6 months ago. It is just a machine that I built to rip a large number of Blu Rays and DVD's onto hard disc after one of my old disc drives died, and I lost a few hundred movies from my personal collection. Very annoying. I was using a 12 year old Phenom 4, which is still totally fine. Just a bit slow. I don't even think I have turned my gaming PC on since January.
@unbornchicken9771
3 жыл бұрын
Hello, Miyconst. Thanks for the review! :) I have a question... Do you think the x99-TF can handle the i7-5820k overclocked to 4.0ghz?
@Miyconst
3 жыл бұрын
Yes, it can. I have assembled a few such rigs, worked well.
@smtek
3 жыл бұрын
Nice review as always! Too bad mobo prices are still bad. I currently own a Huananzhi 8M-F, do you think it can handle a 2660 v3 with a good air cooler ?
@Miyconst
3 жыл бұрын
Xeon E5-2660 V3 is a bit hard for X99-8M-F, but if you don't torture the VRM zone and make sure to cool it properly you should be fine.
@smtek
3 жыл бұрын
@@Miyconst Thanks bro! Maybe I'll have to add one of those ugly coolers but it may be worth it haha
@pragavirtual
3 жыл бұрын
If it for gaming i think the workload is not so hard on vrms, but for work like video editing or rendering then it would be hard on vrms if turbo unlocked.
@smtek
3 жыл бұрын
@@pragavirtual Most of the time I would be gaming, sometimes I render soma videos but its like once a week.
@smtek
2 жыл бұрын
@@Miyconst I ended up settling for a Xeon E5-2640 v3 yesterday, using the first user discount I only paid around 22 euros! Thanks for all the great content man, it helped a lot!
@xjsabcd2947
3 жыл бұрын
a new Board available for choice again!
@AJDOLDCHANNELARCHIVE
3 жыл бұрын
Can tell you spent time in the UK with the very British usage of the word "decent" haha! Cheers! P.S Do you think it's profitable to sell a barebones X99 64GB ECC DDR3 @2133mhz with no GPU (so no video output) E5-2678V3 build in this current market? Or maybe it'd be better to wait for sane GPU prices and put a used RX 580/5600XT and sell it fully built? I've got lots of 1866mhz ECC DDR3 lying around already.
@Miyconst
3 жыл бұрын
Actually I have never been to the UK, my English is a strange mix of almost everything. 😁 Regarding the profitability it's very hard to answer, I would sell now, but you better check your market status.
@dark-op7466
3 жыл бұрын
excellent work on this video ... wanted to ask if you tested the i9 10900 (QTB1) on a b560 and be able to use more than 2990mhz? regards
@Miyconst
3 жыл бұрын
Yes, I have tested, but QTB1 is limited to DDR4-2933 no matter which motherboard is used.
@clickfibra4138
3 жыл бұрын
Hello, I'm from Brazil sorry for my bad english. I need to buy motherboard x99, in your opinion, Which are the best boards currently? I will be using it as a server so it will be connected 24 hours a day, Regards, thanks!!
@Miyconst
3 жыл бұрын
I think you would be best served with Asus WS or Supermicro.
@clickfibra4138
3 жыл бұрын
@@Miyconst Thanks for the quick response, In addition to these boards, do you recommend any other ones? It´s hard to find them.
@Miyconst
3 жыл бұрын
@@clickfibra4138 it all depends on how much you are willing to pay. EVGA and MSI boards are also good.
@clickfibra4138
3 жыл бұрын
@@Miyconst In my country is very hard to find, among Chinese brands, which would you recommend? Huananzhi, Machinist or Jingyue. Sorry for many questions, thank you!!
@Miyconst
3 жыл бұрын
For 24/7 server operation I don't recommend any of the Chinese motherboards.
@eduardosilva4022
3 жыл бұрын
Thks
@carlolalattacosterbosa5821
3 жыл бұрын
nice new entry! too bad it seems this board isn't so good...
@Miyconst
3 жыл бұрын
Yup, unfortunately it's overpriced.
@NoSpamForYou
2 жыл бұрын
Could we unsolder and clip or bend the PCIe power pins out of the motherboard and wire them directly to a power supply to bypass the MOBO VRMs? This would reduce the strain on the mobos. Removing 75 watts from the onboard VRM would probably be a great improvement in reliability and power quality delivered to the GPU. Only problem would be regulating to 75 watts through the bypass?
@Miyconst
2 жыл бұрын
Unfortunately I am not technical enough to answer this question, but theoretically it should be possible.
@sergeleenders6122
Жыл бұрын
Hi ! I love this motherboard. With your MI899 software, what would be the most suitable bios for an E5-2667V4 processor? Do I have to lower the voltages? I had chosen the simple "turbo unlock" version but the speed remains at a maximum of 3.5ghz on each core... What have I done wrong ? Have a good day !
@Miyconst
Жыл бұрын
Xeon E5 V4 are not compatible with Turbo Boost Unlock hack, the best you can do is to use BIOS with unlocked RAM timings.
@aviatorabc-l
2 жыл бұрын
Hello. I ran into a problem. NVME M.2 SSD Tanbassh disc is visible in the bios but is not visible in the system, the device dispatcher and in the control of disks. How to solve this problem? Thanks
@Miyconst
2 жыл бұрын
I am not sure what could be done here, it's a known problem that Chinese X99 motherboards often refuse to work with Chinese SSDs.
@hafeez387
7 ай бұрын
disable driver signature enforcement
@MIKEYZVLOGZ
2 жыл бұрын
how caN i overclock this ? i try to use ibt or intel tuning utilty buti cant do it sy drivers notfound
@Miyconst
2 жыл бұрын
Please watch the video carefully. This motherboard does not support overclocking.
@MIKEYZVLOGZ
2 жыл бұрын
@@Miyconst I'm using a i7 6800k with this board .. is it possible to oc with intel boost technology or intel extreme tuning utility
@Miyconst
2 жыл бұрын
No, it's not possible, as I have already said.
@MIKEYZVLOGZ
2 жыл бұрын
@@Miyconst ok thanks
@t0d0r
3 жыл бұрын
2:40 9200€ ?
@JamesWSleight
3 жыл бұрын
It's probably 92.00 €.
@kwiddel2256
3 жыл бұрын
Are there really cheap motherboards that supports Crossfire, without a Crossfire Bridge? I have 2 old Radeon HD 4350 and would like to use them. (Just for fun, nothing productive, was my first graphics card and bought a second one.) Also quality of the mainboard VRM shouldn't matter so much, because I really don't need a high core count cpu. Turbo Boost Unlock or unlocked CPU / Mainboard would be a nice bonus. Thank you for the amazing content!
@Miyconst
3 жыл бұрын
I have never tested crossfire, thus it's very hard for me to recommend, but in theory all boards with two PCI-E X16 slots should support it.
@kwiddel2256
3 жыл бұрын
@@Miyconst Thanks for your quick reply! I have a H55 Bord here which doesn't support it and the second PCI-E Slot runs @ x1. The H57 version would support it. I think i will scroll through AliExpress and look if there is something I could get.
@binkaram6577
10 ай бұрын
hello there, i found this motherboard cheaper in aliexpress but im still not sure should i buy it for 6800k i7 can u please assist me whether i should go for it or not bcoz known brands are out of the question even as used condition they are over price thank you
@Miyconst
10 ай бұрын
I don't have anything more to say than what I have already told in the video.
@TresheerMc
Жыл бұрын
Hello friend, what x99 board do you recommend for this year 2023? I need a cheap music production pc, I like the xeon 2696v3. Cheers
@Miyconst
Жыл бұрын
Hi there. This video has all the answers: m.kzitem.info/news/bejne/oo1mt5uHh5RzqnY
@TresheerMc
Жыл бұрын
@@Miyconst gracias
@ilovehotdogs125790
2 жыл бұрын
whats the current go-to x99 motherboard? Besides the Huananzhi X99TF since that is too expensive.
@Miyconst
2 жыл бұрын
I have not yet tested all the latest X99 motherboards, but take a look at Machinist X99-MR9A: kzitem.info/news/bejne/mn6Hl5yscpODnn4
@ilovehotdogs125790
2 жыл бұрын
@@Miyconst ok thank you!
@victorcrisostomomellia4162
2 жыл бұрын
My asus extreme motherboard just died. Would you recommend me to buy a chinese x99 motherboard to use with my i7 5820k or upgrade motheboard and processor? What chineses board would you recommend or upgrade? I have 4x4gb 2666 MHz and gtx 970 that I dont intend to upgrade for now. Watercooling from corsair and 1100ax corsair (gift).
@Miyconst
2 жыл бұрын
If you can afford it - upgrade motherboard and CPU. For example get i5-10400F, i3-12100F, i3-10100F. For i7-5820k you need a motherboard with real X99 chipset, good VRM, and good BIOS, otherwise overclocking is impossible. It limits your options to Huananzhi X99-F8 and Machinist X99-K9. X99-K9 has bad VRM though and requires good cooling.
@xoom772x
Жыл бұрын
How this d4 for gaming found deal free shipping will be good for my e5 2690 v3 CPU and Rx 6800 GPU no problems or bottlenecks
@Miyconst
Жыл бұрын
Yes, it will be a rather big CPU bottleneck, unless you play at 2k/4k single player games.
@BlackMagicBliss
2 жыл бұрын
Greetings Miyconst. I managed to get one of these boards BNIB for $40 USD. I was wondering if you had any insight on how to OC the CPU with it? I tried using Intel XTU but it's not supported, and I can't find any way to OC the CPU in the BIOS.
@Miyconst
2 жыл бұрын
Hi. Did you watch the video at all? I have specified very clear that this board does not support overclocking.
@sergeleenders6122
2 жыл бұрын
Is it worth buying an e5 2650 V4 to replace my 2640 V3 with this motherboard? Mainly for games like GTA... Regards.
@Miyconst
2 жыл бұрын
Definitely not. The V4 CPU will be worse that your E5-2640 V3, if you have Turbo Boost Unlovked.
@PapaKostya
3 жыл бұрын
Спасибо 👍 Она неоправдана по цене!
@Miyconst
3 жыл бұрын
Згоден на всі сто.
@PapaKostya
3 жыл бұрын
@@Miyconst HUANANZHI X99 BD4 V1.1 будет получше в качестве
@aldinklaiqi7808
2 жыл бұрын
I have the JINGYUE X99 Titanium D3. Is there any difference between (JINGYUE X99 Titanium D3) and (JINGYUE X99 Titanium D4)? do both have the same bios?
@Miyconst
2 жыл бұрын
I don't know because I have not tested the D3 version, but I assume that they are identical, D4 uses DDR4 memory and D3 uses DDR3 memory. Also, as far as I know, the motherboard is compatible with Huananzhi X99-BD3/BD4 BIOS.
@ohagiman7753
2 жыл бұрын
I hope theres review for jginyue x99 titanium D3
@Miyconst
2 жыл бұрын
@@ohagiman7753 It's exactly the same as D4, just DDR3 memory slots.
@kevinmagsy0312
3 жыл бұрын
Hello sir, is it okay if you may also review the x99 huananzhi CH8 motherboard
@Miyconst
3 жыл бұрын
Do you have a link to the motherboard?
@i1hack
3 жыл бұрын
Dude Qqlt, qqls, qtj2 the stock are depleting and if available the price is going up. Can you recommend other Cpu like Qnvh, ql3x, qph7
@Miyconst
3 жыл бұрын
There are other interesting options as well, just check the number of cores, clock frequency, and the price.
@lion_s7676
2 жыл бұрын
Can I put here usual ddr4 Kingston HyperX? It would be 2133 max with e5 2666v3? Thx
@Miyconst
2 жыл бұрын
Yes and yes. HyperX memory should work, but if you have 4-bank modules they won't be recognized by the motherboard.
@DBHHellhound
7 ай бұрын
So what's the best x99 motherboard for overclocking a 1660 v3 ?
@Miyconst
7 ай бұрын
I can't say which one is the absolute best but Asus X99 WS series are close to the best.
@dylanroemer4277
Жыл бұрын
do these x99 mobos support xmp or can i overclock the ram to 3600 mhz and overclock a xeon e5 2696 v4 cpu
@Miyconst
Жыл бұрын
No, no, and no. Any E5-26XX can't be overclocked with the clock multiplier at all.
@VoltageLP
3 жыл бұрын
Damn, I need a MoBo with 8x DDR3 slots. I have the memory sticks waiting for it in a drawer for half a year already 😬
@Miyconst
3 жыл бұрын
Huananzhi X99-T8 is the motherboard for you 🙂.
@Revoku
4 ай бұрын
do many of these X99 boards have bifurcation of the pcie lanes?
@Miyconst
4 ай бұрын
Quite some.
@Revoku
4 ай бұрын
@@Miyconst oh awesome, I'm going to check if mine does, seems a waste to have an x16 slot using a gpu that doesn't do much
@xuemike
2 жыл бұрын
Anyone tried using this with a hypervisor like VMware or Proxmox?
@artur19846
3 жыл бұрын
Oh man, I was just about to buy that piece of crap! Thanks to your video I have saved a lot of money! The chipset and PCI issues are critical for me. That MB is not worth even half of its price!
@Miyconst
3 жыл бұрын
Totally agree. Half the price would make it way much more competitive though.
@victormanuellpz
3 жыл бұрын
Hello, I have a Huananzhi X99 F8 bought 1 week ago and when I use bios from MI899 it shows F9 error and beeps 4 times on the startup, then enters to bios settings and says “ROM Image is not loaded” “ROM Image update denied” on a section called “Recovery”. When I click “Save changes and exit” it goes to Windows, but it happens on every boot. Is this because the board is new and it has a different bios? I can send you the dump of the original bios if you want: anonfiles.com/ja21xbB7u4/hz-x99-f8-20210810-014221_rom PD: I have noticed that the board has MCIX MX25L12833F chip, not winbond one.
@Miyconst
3 жыл бұрын
Hi there. You definitely have an updated revision of the motherboard and the previous BIOS is no longer compatible. If I will get a chance, I will test the new motherboard as well.
@victormanuellpz
3 жыл бұрын
@@Miyconst Ok, thank you very much
@pragavirtual
3 жыл бұрын
Can i use ur app to update my x99 rs9 board if i already turbo unlocked it manually? (I want memory timming options)
@Miyconst
3 жыл бұрын
Yes, you can, but always learn the subject and make sure to pick the right BIOS.
@alexandreantunessoares9163
2 жыл бұрын
i have a trouble in titanium, my 780ti after some minutes drop pciexpress 3.0 to 1.1 and dont back to 3.0 and the speed is decresed, someone got this trouble?? i did test with other video card hd 6770 and this card can run in 2.0 x16 but motherboard just let run in 1.1 i am so sad
@Miyconst
2 жыл бұрын
Yes, I have seen this issue with many other Chinese X99 motherboards. The older GPUs don't go above PCI-E 1.1, and unfortunately I didn't find a solution for the problem. Some people say that it helps to reboot the computer. You can also try BIOS from Huananzhi X99-BD4.
@alexandreantunessoares9163
2 жыл бұрын
@@Miyconst but my motherboard i guess new, running with c224, bios bd4 can works?
@Miyconst
2 жыл бұрын
@@alexandreantunessoares9163 completely new does not mean it's completely issue-free. I have seen reports online that BIOS from Huananzhi X99-BD4 works, but I have not tested myself.
@DarkIdrees
2 жыл бұрын
is there any isues using 2666mhz ddr4 or 3000mhz memory in this board?
@Miyconst
2 жыл бұрын
No, you can use it, but the speed will be limited by your CPU to DDR4-2133 or DDR4-2400.
@osmeralberto
3 жыл бұрын
Hola saludos podrías hacer un vídeo para hacer el hack de turbo Boost en la motherboard x79G versión 1.3 con xeon e5 2689 gracias
@pragavirtual
3 жыл бұрын
Cant turbo unlock x79, only x99. X79 have some auto turbo boost but it doesnt get full boost for all cores.
@zzzide
3 жыл бұрын
The current V3 prices are tempting but these motherboards are too bad for the outrageous prices they’re asking for them. Besides that, the current GPU prices are also insane…
@Miyconst
3 жыл бұрын
So true.
@pedrorosales8489
2 жыл бұрын
Hola, Cual opción recomiendas seleccionar para el turbo boost xeon 2640v3 en Jginyue X99 Titanium D4?
@Miyconst
2 жыл бұрын
I would go with the safe option: -50/50.
@pedrorosales8489
2 жыл бұрын
@@Miyconst gracias, ya lo aplique esa opción
@jeandlruarising697
3 ай бұрын
Tengo esta misma placa madre, y tengo un xeon E5 2650 v3, hice el proceso de turbo bost con 50-50-50, loa fps subió si, pero el problema que tengo es que al jugar o hacer mas actividades después de una hora aproximadamente, todo se congela y se pone pantalla azul o caso contrario tengo que reiniciar forzosamente, porque sucede esto no entiendo, tuve que restablecer la placa como default y estoy de Nuevo instalando todo ya que ni reconoce el grub 😢
@Miyconst
3 ай бұрын
Each CPU is unique, bad samples can't tolerate voltage reduction.
@jeandlruarising697
3 ай бұрын
@@Miyconst i see... in your experience, which xeon do you recommend for this board to make tubo bost
@Miyconst
3 ай бұрын
You can go with a V4 model, no TBU is required or possible.
@jeandlruarising697
3 ай бұрын
@@Miyconst THANK MY KING I will try it
@jmujutjtzjztmjmj1413
3 жыл бұрын
which cpu is better for gaming e5 2630 v3 3.2ghz all core or ryzen 7 1700 with light oc
@Miyconst
3 жыл бұрын
It's a hard question, I would say it depends on the RAM speed and timings, if you manage to O.C. Ryzen & RAM it will be better, but if you use the cheapest DDR4 with horrible timings - Xeon is better.
@jared4670
Жыл бұрын
Does removing the CMOS battery not clear the bios?
@Miyconst
Жыл бұрын
It should, but it doesn't.
@jared4670
Жыл бұрын
@@Miyconst that's very interesting. Thank you
@edwardguevara6611
2 жыл бұрын
Hello, I have built a PC with this board (JGINYUE X99 TITANIUM D4) with E5 2670 v3, I can't get the video card to work, when I turn it on it starts to work but after a few seconds it turns off, I tried with the gtx 1070 and also with the gtx 1050ti with both the same thing happens, but with the gt 610 it works, but this card is not useful for the software that I want to use. Does anyone have any idea how to solve this?
@Miyconst
2 жыл бұрын
What happens if you install GT 610 and GTX 1070? What is your PSU? Also, some say that you can try BIOS from Huananzhi X99-BD4, but do that only if you have a programmer to unbrick the motherboard.
@edwardguevara6611
2 жыл бұрын
@@Miyconst Thanks for answering, with the gt 610 if it works everything works fine, but the others (gtx 1070 with additional power, gtx 1050ti with direct power) do not recognize them or turn on (cooler does not start). Are you sure changing the bios can fix it?
@Miyconst
2 жыл бұрын
No, I don't think the BIOS will fix it, but it might. From your description it sounds like the motherboard PCI-E slot is damaged. Did you try both slots? Did you try installing two GPUs?
@edwardguevara6611
2 жыл бұрын
@@Miyconst It doesn't work in any of the slots...
@Miyconst
2 жыл бұрын
@@edwardguevara6611 that's sad, seems to be a very strange issue.
@N604K
Жыл бұрын
Anyone know if the motherboard DDR4 support up to 3200Mhz?
@Miyconst
Жыл бұрын
I know, it doesn't.
@deathwishsquish9142
3 жыл бұрын
I feel bad, I gave my dad an artermir or whatever. It’s been fine for months but I’m guessing it will be dying sometime in the future :’ (.
@Miyconst
3 жыл бұрын
Don't be too sad, all motherboards die after a while, the question is for how long it lasts. If the motherboard works for a year or more - enjoy it.
@deathwishsquish9142
3 жыл бұрын
@@Miyconst that was nice to read, thank you
@pachoprzo436
3 жыл бұрын
what happend to aliexpress prices are insane who in right mind would buy that what is excuse for that prices
@Miyconst
3 жыл бұрын
Chia cryptocurrency mining happened and the prices skyrocketed, now it's slowly going back to normal.
@danielerstein5858
2 жыл бұрын
Motherboard work with VMware ESXI?
@Miyconst
2 жыл бұрын
Sorry, I don't know.
@fhfddjvheufid6213
3 жыл бұрын
Xeonsssss are fun X79 - A lot of cheap RAM X99 - faster & modern i3-10100F ? Mutant's But where is Intel Core i3-10100F ? Maybe cheap budget test ?
@Miyconst
3 жыл бұрын
How about my Xeon E5-2678 V3 vs Core i3-10100 video? kzitem.info/news/bejne/xY2jyqx6fWqVnZw
@masternana9591
3 жыл бұрын
does this motherboard work with the i7 5930k? please, who knows about this? I saw in Google the chipset of this motherboard it is not the x99, this is the b85 chipset, the i7 5930k runs on this motherboard?
@Miyconst
3 жыл бұрын
Please watch the video, I have reported that the motherboard work with i7-5820k, which means that i7-5930k is also supported, but no overclocking is possible.
@masternana9591
3 жыл бұрын
@@Miyconst oh thank you so much
@xoom772x
Жыл бұрын
Is this better than mr9a I have on way soon try
@Miyconst
Жыл бұрын
It's about the same, if you flash this motherboard with Huananzhi X99-BD4 BIOS.
@xoom772x
Жыл бұрын
@@Miyconst I don't mess with bios stuff or tweaking stuff I'm gust gamer looking try past stuff I got 2690 v3 and Rx 6800 and Arc a770 I'm test both GPU on e5 stuff bought the d4. but I'm cancelling it cuse hear to much bad stuff with fake 8 fases an CMOS problem I'm stick with mr9a come soon
@jebalegroso5653
7 ай бұрын
this board turbo boost unlocked?
@Miyconst
7 ай бұрын
Please watch the video.
@lorenzozero217
3 жыл бұрын
Can you suggest me a good motherboard and processor for streaming, cad and gaming. Since the price actually rise quite a lot.it seem not worth getting xeon ,though i like xeon.please suggests budget build for me.or share me your link .
@Miyconst
3 жыл бұрын
Do you want an X99 motherboard? And what is your budget?
@lorenzozero217
3 жыл бұрын
I am okay with it but my budget max 300
@Miyconst
3 жыл бұрын
@@lorenzozero217 For $300 you can get a Core i5-10400F + B560 motherboard, why would you bother with X99?
@lorenzozero217
3 жыл бұрын
Well i never actually own a rig before so 300 dont seem to be enough for me to have a rig.
@Miyconst
3 жыл бұрын
@@lorenzozero217 wait, you want entire computer for $300? I thought it's budget for motherboard + CPU combo.
@user-wv4lv2su1s
Жыл бұрын
is this mobo support cpu oc?
@Miyconst
Жыл бұрын
No, please watch the review.
@iharvalianski7843
2 жыл бұрын
Will it work with 2698 v3 or 2690 v4?
@iharvalianski7843
2 жыл бұрын
I would add that friend is running it as production seever and it lasts for hem over a year he has multiple builds from Proxmox VE and TrueNAS scale on 24/7
@Miyconst
2 жыл бұрын
Yes, the motherboard should work with both of the CPUs.
@BlahBlah-cn5qe
3 жыл бұрын
IME not working is a good thing in my opinion
@Miyconst
3 жыл бұрын
Non working and disabled are different things. When IME is properly disabled or removed from the BIOS I don't count it as a minus, but when it is broken and causes issues - it's an annoying minus.
@BlahBlah-cn5qe
3 жыл бұрын
@@Miyconstoh, I misinterpreted it. But ime is actually a horrible piece of firmware that runs a custom version of Minix that literally monitors network usage, ram usage, gets encryption keys, and does things it shouldn't. It's literally spyware at the hardware level.
@Miyconst
3 жыл бұрын
@@BlahBlah-cn5qe I agree about IME, but it shall either be present or absent, on this motherboard it's broken, Windows tries to launch it, waits for ages, and then shows a malfunctioning device in the device manager.
@salehalmalki6801
3 жыл бұрын
I love you ❤️
@user-hk6fe5xo3g
3 жыл бұрын
Подпишусь. Надеюсь нам удастся пообщаться.
@Fesovika
3 жыл бұрын
Whole AliExpress is shit atm for Poland. For each item you have to count +23% price increase. :( You can't avoid tax in there anymore.
@Miyconst
3 жыл бұрын
In Sweden we add 25% :)
@prizory1101
2 жыл бұрын
It didn't fit my CPU even though it was the right kind which sucked
@Miyconst
2 жыл бұрын
What is your CPU name?
@prizory1101
2 жыл бұрын
@@Miyconst e5 2689
@prizory1101
2 жыл бұрын
@@Miyconst most of the pins on the motherboard socket already bent so I am gonna try to replace the socket
@Miyconst
2 жыл бұрын
And why do you think that an LGA 2011-3 motherboard is the right one for E5-2689? These two use physically different CPU socket. E5-2689 - LGA 2011 socket, which is not the same as LGA 2011-3.
@prizory1101
2 жыл бұрын
@@Miyconst I see thanks
@DAVIDALONSOH1
2 жыл бұрын
my friend please helpme, i am David Alonso, i sendyou a e-mail, thankyou so much!!
Пікірлер: 240