Put the new bearings on the inside and the older ones on the outside it will be easier to replace when one good out, also put a new shaft on the front gang but on a rainy day weld up the old one and grind smooth, that spare shaft will save you some day!!
@sweetfarmsllc8886
3 жыл бұрын
Those 230's ridge like crazy, they only bring scrap price around here as well. Their is a reason for that. Dad and I bought a new 230, kept it one season and traded if for a new International disk. I wouldnt mess with welding those shafts, they are stretched more than likely, thats why the blades are loose. A bad disc job will haunt you for years in fields. Takes along time to get the ridges out.. I would consider passing it on to someone else and looking at an International 490/496.
@davidshumski4629
2 жыл бұрын
Out of adjustment obviously.
@samtalley791
3 жыл бұрын
If you can weld you can weld those worn spots in on the shaft and grind it off smooth with a grinder. It’s not a perfect fix but it works. Did you have any luck getting a 12 row planter?
@JoeRocket-sf6qs
3 жыл бұрын
Personally I would build up the worn area of the shaft ,then reshape it with the grinder,good as new.that ram prolly needs replacing tho.
@bennettfarms920
3 жыл бұрын
You know I thought about that I will see what the price is for new and then decide on that and I’m thinking the ram needs to be replaced too.
Пікірлер: 6