John Deere 24 Speed PowrSync™ Transmission with Hi-Low Clutch
Description:
24 Speed Manual Shift Transmission
Replaces PG201830, PG201920, RE327097, AR311010
Condition:
Remanufactured to new OEM specifications with new OEM parts.
Reman Process:
Using John Deere Service Advisor Repair Guidelines and Process, transmissions are completely disassembled to the individual part level, cleaned, inspected and assembled to OEM specifications.
We also provide four (4) oil scan kits to be performed at 50, 250, 500 and 750 Hours.
Remove, Clean, Inspect and Assemble the following Components:
Filter Relief Valve Housing
Transmission Control Valve Housing R100738
Transmission Pump (upgrade to high volume pump) RE66229, RE561126, R202393, R171352
Front Cover Parts
Hi-Lo Clutch and Brake Assembly R114166, RE52152, R157468, R116052, R84424
Hi-Lo Planetary R84416, R119367, R114156
Spacer Housing and Parts
Traction Clutch RE25485, R101097, R84530
Input Shaft R105405
Countershaft R83678, R83599
Output Shaft R119591
Synchronizers on All Shafts
Park Pawl Assembly
Shifter Forks
Adjust Shaft End Play
Install Transmission Lube Line with Instructions AR286919
Hose RE263694, 38H5016, M87733, N198300 and (3) T77613
Customer Responsibilty:
Follow John Deere Service Advisor Installation Guideline and Process
Install or Swap Yokes (if required)
Perform a Transmission and Hydraulic System Cleanup
Install Transmission Clean Up Filter AT112393
Use John Deere HY-GARD® Oil
Inspect Shift Lever Control Assembly (repair as needed)
Submit Installation Work Order with Original Core Diagnostics
Submit Oil Scans at 50, 250, 500 and 750 Hours
Properly Package Core with All Fixtures as Shipped
Fitment:
9100, 9200, 9300, 9400 (R124974, R175282, RE175879, RE70314)
9120, 9220, 9320, 9420 (R124974, R175282, RE178134, RE70305)
9230, 9330, 9430 (R124974, R175282, RE178134, RE70305)
9360R, 9410R, 9460R (R310818, R313301, RE310819, RE313304)
Core Rebate:
Core Charge is an additonal $5,000
Warranty:
2 Year
Shipping:
Flat Rate $500 (both ways).
Details:
NOTE 9MST-5 is a direct replacement for 9000 - 9R Tractors,
but it DOES NOT have a port for the Reverse Detection Switch (RE153769).
This switch IS NOT a Reverse Safety Switch and IS NOT mandatory to operate the tractor. It only affects Reverse when using the Implement Management System (IMS) (if equipped).
If the IMS is used, it only effects a few functions of it, like Hitch and PTO usage in reverse.
The switch must be plugged into the harness to prevent codes and zip tied back to the harness to keep it out of the way.
9R Input Topshaft Bearing Housing and Lower Transmission Lines
9R with PTO use R84610
9R without PTO and Scavenge Drive Pump use R311614
Lower Transmission Lines are still being explored.
Негізгі бет John Deere 24 Speed PowrSync Transmission Problems (Solved)
Пікірлер