Way to work your way through a new problem it sounds good 👍
@TimothyFluegel
Жыл бұрын
Thankyou Steve!!
@gleanerk
Жыл бұрын
Well done Tim . Watching you work on it was my first time seeing how to operate systems for propane. Must be a low hour tractor or rebuild because there’s no smoking. Clean burner.
@TimothyFluegel
Жыл бұрын
Thankyou Scott! This was my 1st time too lol so we learned together. Propane burns way cleaner than gas or diesel. The oil in them will look like new after 100 hours. That being said I think it's the only advantage to having an lp tractor. They don't get nearly the fuel economy and are around 5 to 10 less hp than their gas or diesel counterparts, but obviously cleaner burning engine makes for a longer life of the engine.
@garybarrett6581
Жыл бұрын
how you doing Tim ben a long winter and ready for spring we plowed our minfarm two weeks ago man did it plow nice and after that we have had about 4 inches of rain and has been cold some corn planted by the big farmers. next week is cold and wet here in Guthrie county Looking forward to seeing your plow day videos too. l also got a new hip in Febuary so looking farward to farming and tractor shows and riding and going to Rantoul this fall!!! l will be watchin!!!!!!!
@TimothyFluegel
Жыл бұрын
I hear that I'm ready to get to farming. I got almost 80 acres plowed so far. We had a week in the 80s, then just like that plowing one day with ac on in the cab then, 30° and looking at an inch of snow the next morning 😆 then it's been wet and cold since, there's usually allot if corn in the ground around me at this time, this year in the only one that even has any work done. It makes me feel like I'm ahead anyhow 😆. That good to hear about the hip placement, sounds like everything went well with it too. Congratulations Gary!
@stevepittsley739
Жыл бұрын
worked on lp engines for many years must have good spark & plugs the regulator is easy to rebuild usually will out last engine , have 4 lp tractors one green , one orange and two red
@TimothyFluegel
Жыл бұрын
I've been wanting to learn the lp systems, I've read up on them as much as I could in the past, but it was nice working on this one and learning 1st hand. Thankyou for the information, and for watching.
@TimMartin-bh9js
Жыл бұрын
Nice video still good looking tractor
@jaycool7805
Жыл бұрын
Thanks for the videos!
@TimothyFluegel
Жыл бұрын
Your welcome Jay thanks for watching and commenting!!
@daleschroeder8661
Жыл бұрын
Looks good buddy
@TimothyFluegel
Жыл бұрын
Thankyou Dale!
@evanaustin2636
Жыл бұрын
Pull knob to override stop- on my uncle's 4020 diesel you had to pull the throttle lever out when you moved it all the way up, that's how you turned the engine off. Not sure what it's purpose would be on a gas or LP tractor. Grandpa converted his wd45 to propane at one time, he used it on his grain dryer. Since he had a propane tank out there for the burner, he ran another line from the big tank to the tractor so he never had to add fuel. Just shut it off once a day to check the oil then back at it! I never knew much about the propane system, but if it got low on antifreeze it would frost up. You got that one sounding good! It should make somebody a good tractor. Hope you have a good one Tim
@scottmattingly9643
Жыл бұрын
That's true if it's a diesel but gas tractors don't work that way
@evanaustin2636
Жыл бұрын
@@scottmattingly9643 Why did the gas tractors still have that on the throttle lever? I know the diesels used it, but like I said before I don't know what purpose it would serve on a gas tractor. All the Deeres I've been around have been diesel
@TimothyFluegel
Жыл бұрын
Thankyou Evan, I got someone gets it to use it personally. About the know I wonder if they just made one steering/ throttle unit for all the models 🤔 it doesn't seem to do anything on this one 😆.
@evanaustin2636
Жыл бұрын
@@TimothyFluegel I wondered it it might be that, they just didn't want to manufacture a different part. Good an explanation as any. Hope you have a good one Tim!
@daleschroeder8661
Жыл бұрын
Always the first time lol tim
@TimothyFluegel
Жыл бұрын
😆 you got that right there s1st tone for everything, how do you think I did Dale?
@daleschroeder8661
Жыл бұрын
@@TimothyFluegel well u did. a really nice Job 👍 and it looks like it ready. For the field. Well besides being Green it looks like a trophy. Project. Tim
@joshwelner1951
Жыл бұрын
lol jd has a cracked head LoL not surprised its the main problem with them in newer Marine motors. started somewhere around mid to early 2000's. but I'm taking about the 275hp-750hp boat motors
@TimothyFluegel
Жыл бұрын
I didn't even know that jdx made marine engines lol there's not even a body of water near me to run that much hp though the great lakes I guess but that's up by Chicago and sick I stay away from there lol
@joshwelner1951
Жыл бұрын
@@TimothyFluegel I'll stay in Maine yup👍 and I'm not 💩on jd heads go at some where around 12-18k hours (from what I've seen) my uncle put three heads on his 500 hp JD 28k hours repower he's boat with a 650hp Scana. My boat is much smaller I'm running a 330hp Volvo it at 7800 hours but it a hi rpm turning motor so I'm starting to get nervous my mechanic says it's a 12k hour motor 🤷 only one way to find out hope he is right
@scottmattingly9643
Жыл бұрын
I spent a lot of seat time on one like that
@TimothyFluegel
Жыл бұрын
I'd like it to have more hp 😆 about 10 to 15 more would really have made it a great tractor I think. Once I got used to the shift pattern lol.
@scottmattingly9643
Жыл бұрын
@@TimothyFluegel yes my cousins were always say that when they come to help us
@keithrobinson1331
Жыл бұрын
Those propane tractors don’t usually have that problem iam not a propane expert but have worked on a bunch of fork lifts and the burn very clean for the most part. 🤔 I think someone didn’t take much care of it?
@TimothyFluegel
Жыл бұрын
I thought it to be odd myself. I imagine it had a antifreeze leak at some point and they ran it too hot. Just a guess. There also the guys that will stop in the field with the implement still in the ground and just shut the tractor off 😆. That's not good for any engine no matter how reliable it is.
@daleschroeder8661
Жыл бұрын
Adjust the carberator that’s the trouble
@TimothyFluegel
Жыл бұрын
It was at the end for sure. I think it needs a little more adjusting yet.
@daleschroeder8661
Жыл бұрын
@@TimothyFluegel yeah if it misses a lot most generally it has some carbonation. Problem s So that’s what I thought it was lol
@deanmeyer1815
Жыл бұрын
That big chunk of iron doesn’t know what color it is painted.
@TimothyFluegel
Жыл бұрын
Lol no it does not.
@justinblain928
Жыл бұрын
Pert tonic is garbage! Stay with points
@deanmeyer1815
Жыл бұрын
I converted my WD45 to 12 volt negative ground and replaced the points with a pertronix electronic ignition 25 years ago and never had a problem with it.
@justinblain928
Жыл бұрын
@@deanmeyer1815 I’ve never had a set of points go bad for me. Even after converting to 12v. I don’t run ballast resistors either
@TimothyFluegel
Жыл бұрын
I've heard it both ways, some guys live them other hate them claim nothing but problems. I don't have a problem with points so I've never hadca reason to switch so I don't really have an opinion on it to be honest lol. 😅
Пікірлер: 39